1 / 29

Surface Marine Wind Retrieval in Non-Precipitating Regions

Surface Marine Wind Retrieval in Non-Precipitating Regions. Nonlinear regression (2D-Var) approach Radarsat-1 synthetic aperture radar (SAR) Validation using ship and buoy winds SAR error estimates Conclusions. Harold Ritchie, Richard Danielson, and Michael Dowd

adonai
Download Presentation

Surface Marine Wind Retrieval in Non-Precipitating Regions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Surface Marine Wind Retrievalin Non-Precipitating Regions • Nonlinear regression (2D-Var) approach • Radarsat-1 synthetic aperture radar (SAR) • Validation using ship and buoy winds • SAR error estimates • Conclusions Harold Ritchie, Richard Danielson, and Michael Dowd Canadian Meteorological Centre and Dalhousie University

  2. wind gusts (darker) Regression Approach • The assimilation of SAR data • into models depends partly on • whether errors in SAR-wind • information can be quantified • the identification of conditions • for which SAR data improve • marine wind forecasts. • Errors can be explicitly quantified using nonlinear regression. • These may be related to physical processes (e.g., wave tilt, • precipitation impact) or satellite characteristics (e.g., beam • mode, incidence angle).

  3. Regression Approach SAR backscatter cross section SAR errors Numerical Model winds Model errors

  4. Regression Approach Hersbach (2003), Vachon and Dobson (2000) SAR backscatter cross section SAR errors Numerical Model winds Model errors Radarsat-1 incidence angle bias correction

  5. Regression Approach • CMOD is first used to remove the incidence angle • dependence of the SAR obs ( ). This allows R to • be positive definite. • J is generally a function of the estimated winds (x) • and the unknown error covariances (R and B). • Here, error covariances are assumed to decay • exponentially with a length scale of 150 km and B • error variances are fixed at 1 m2/s2 (only R varies).

  6. Radarsat-1 SAR • Polar orbiting every 100 minutes at ~800 km • C-band SAR (5-cm wavelength; horizontally polarized) • First ScanSAR to use multiple beam modes to obtain • ~50-m resolution over swaths of ~400 km • We employ 609 acquisitions from June 2004 to • July 2005 at 6.4-km resolution

  7. 400-m SAR Acquisition • (Koch 2004 smoothing) • masking over land Backscatter (dB)

  8. 400-m SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams Backscatter (dB)

  9. 400-m SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice Backscatter (dB)

  10. 400-m SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice • where retrieved wind speed • would be less than 3 m/s or • greater than 33 m/s Backscatter (dB)

  11. 800-m SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice • where retrieved wind speed • would be less than 3 m/s or • greater than 33 m/s Backscatter (dB)

  12. 1.6-km SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice • where retrieved wind speed • would be less than 3 m/s or • greater than 33 m/s Backscatter (dB)

  13. 3.2-km SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice • where retrieved wind speed • would be less than 3 m/s or • greater than 33 m/s Backscatter (dB)

  14. 6.4-km SAR Acquisition • (Koch 2004 smoothing) • masking over land • along beam seams • over sea ice • where retrieved wind speed • would be less than 3 m/s or • greater than 33 m/s Backscatter (dB)

  15. Ship and Buoy Validation GTS ship/buoy obs (CDC web archive)

  16. Ship and Buoy Validation • GTS ship/buoy obs • (CDC web archive) • vertical adjustment to • 10-m using Walmsley • (1988) or logarithmic • profile requires obs • heights (WMO Pub 47)

  17. Ship and Buoy Validation • GTS ship/buoy obs • (CDC web archive) • vertical adjustment to • 10-m using Walmsley • (1988) or logarithmic • profile requires obs • heights (WMO Pub 47) • taken within 90 min of • an acquisition

  18. Ship and Buoy Validation • GTS ship/buoy obs • (CDC web archive) • vertical adjustment to • 10-m using Walmsley • (1988) or logarithmic • profile requires obs • heights (WMO Pub 47) • taken within 90 min of • an acquisition • valid within a radius of • 5-50 km, depending on • proximity to land

  19. Retrieval Example SAR Backscatter (dB) Precipitation Region

  20. Retrieval Example SAR Backscatter (dB) Normalized by CMOD Precipitation Region

  21. Retrieval Example 15-km Hourly Model Winds Normalized by CMOD xb and CMOD(xb)

  22. and CMOD() Retrieval Example 15-km Hourly Model Winds Retrieval xb and CMOD(xb)

  23. Error Estimates SAR error variance is reduced (as expected) Errors appear Gaussian

  24. Error Estimates Wind speed (and direction) errors are unchanged Errors appear Gaussian

  25. Error Estimates • Precip regions have higher error standard deviation • (with slightly stronger wind speeds) • Low incidence angle regions (with no precip) have • higher error standard deviation

  26. Conclusions • If errors in ship and buoy obs can be • neglected, then the regression approach • permits a distinction between errors with • and without precipitation and at high and • low incidence angles. • A more sophisticated approach considers • ship and buoy errors (which may be larger • than corresponding SAR or model errors). • The B and R error covariance matrices can • also be improved.

  27. Retrieved wind speeds can be biased at near and • far range (Monaldo et al. 2001) • We obtain wind speeds that are more consistent with • numerical model winds by multiplying SAR data by • = 1 + 0.005 (Incidence Angle – 30) Radarsat-1 Incidence Angle Bias

  28. Spatial Error Correlation relative to ship and buoy wind speed and backscatter (using CMOD)

  29. CMOD (C-band model) empirically relates wind and Bragg scattering from waves.

More Related