1 / 2

Axial Split Casing Centrifugal Pump

NMZ/NMZV pump is single stage, axial split case, double suction, between bearing centrifugal pump. It’s suitable for pumping clean water or slightly contaminated water or liquids which are physically and chemically similar to water, where large quantity and certain head are required.<br><br>

Elaine2017
Download Presentation

Axial Split Casing Centrifugal Pump

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Croos Pump (Shanghai) Co., Ltd http://www.croospump.com/ Axial Split Casing Centrifugal Pump NMZ/NMZV pump is single stage, axial split case, double suction, between bearing centrifugal pump. It’s suitable for pumping clean water or slightly contaminated water or liquids which are physically and chemically similar to water, where large quantity and certain head are required. The casing is axially split into two parts. The upper part (lighter) and lower part of the casing differ in weight. The inline suction and discharge nozzles are cast in the lower half casing. This design makes it easy to remove the upper casing and rotary components without disturbing the motor and the pipework. The closed double suction impeller can lower the NPSHr due to each impeller eye only handles half of the total pump flow rate. And it also can increase the efficiency through back-to-back / double suction impeller design, as the power is not lost to balance the hydraulic thrust. The bearings are located on both sides of the rotor, which reduces the deflection of the shaft and make the pump runs more stable. Pumps generating high heads have dual volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads. And it’s with a wide installation versatility, the pump can be produced in horizontal or vertical mounting, clockwise or anti-clockwise rotation, side suction or bottom section. NMZ Type Horizontal Split Case Centrifugal Pump NMZV Type Vertical Split Casing Centrifugal Pump Tel: +86-21-64092786 Email: export@croospump.com

  2. Croos Pump (Shanghai) Co., Ltd http://www.croospump.com/ Selection step of axially split pump 1. List the basic data of the axially split pump, including the characteristics of the medium, the particle diameter and quantity of the body contained in the medium, medium temperature, the required flow pressure pipeline system data. 2. Determine the flow and pumping lift. (1) Determination of the flow a. If the production process has been given the minimum, normal and maximum flows, maximum flow shall prevail. b. If the production process is only given the normal flow, certain margin should be left. For ns>100 large flow and low lift pump, the flow margin shall be 5%; for ns<50 small flow and high lift pump, the flow margin shall be 10%; for 50≤ns≤ 100 pump, the flow margin shall also be 5%; for pump with poor quality and bad operation conditions, the flow margin shall be 10%. c. If the basic data only contain the weight flow, it should be converted to the volume flow. Tel: +86-21-64092786 Email: export@croospump.com

More Related