1 / 51

Repairs and / or perform Repeat Setting Network Connection

Repairs and / or perform Repeat Setting Network Connection. Explain the steps of preparation settings reset network connection. HOME. COMPETENCE MAPING. Dasar Kejuruan. Level I ( Kelas X ). Level III ( Kelas XII ). Level II ( Kelas XI ). 2. 3. 1. Merakit Personal Komputer.

tao
Download Presentation

Repairs and / or perform Repeat Setting Network Connection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Repairs and / or perform Repeat Setting Network Connection Explain the steps of preparation settings reset network connection HOME

  2. COMPETENCE MAPING Dasar Kejuruan Level I ( Kelas X ) Level III ( Kelas XII ) Level II ( Kelas XI ) 2 3 1 Merakit Personal Komputer Menerapkan teknik elektronika analog dan digital dasar Melakukan instalasi perangkat jaringan lokal (Local Area Network) Melakukan instalasi perangkat jaringan berbasis luas (Wide Area Network) Melakukan instalasi sistem operasi dasar Mendiagnosis permasalahan perangkat yang tersambung jaringan berbasis luas (Wide Area Network) Mendiagnosis permasalahan pengoperasian PC yang tersambung jaringangnosis Menerapkan fungsi peripheral dan instalasi PC Klik Disini Menerapkan K 3 LH Membuat desain sistem keamanan jaringan Mendiagnosis permasalahan pengoperasian PC dan periferal Melakukan perbaikan dan/atau setting ulang koneksi jaringan an Melakukan perbaikan dan/atau setting ulang koneksi jaringan an Melakukan perbaikan dan/atau setting ulang sistem PC Melakukan instalasi sistem operasi jaringan berbasis GUI (Graphical User Interface) dan Text Melakukan perbaikan dan/atau setting ulang koneksi jaringan berbasis luas (Wide Area Network) Melakukan perbaikan periferal Mengadministrasi server dalam jaringan Melakukan perawatan PC Merancang bangun dan menganalisa Wide Area Network Melakukan instalasi sistem operasi berbasis graphical user interface (GUI) dan command line interface (CLI) Merancang web data base untuk content server Melakukan instalasi software Lulus HOME

  3. Learning Objectives • Training participants able to step-step preparation repair network connectivity. • Training participants able to choose the equipment help the appropriate examination. HOME Module 11 Repairs and / or perform Repeat Setting Network Connection

  4. Know the equipment that will be used and required in the network. • Knowing the type of network topology that is used by the client computer. • System does not use trial and error, which means we only try-just try without knowing of the problems actually faced. Module 11 Repairs and / or perform Repeat Setting Network Connection

  5. Preparation Repairs Network Connectivity on the Bus topology Preparation of the improvement Bus network topology is: a. Network Card (Network Interface Card / LAN Card) A network card (LAN Card) is inserted in the expansion slot on a motherboard and server computer workstation (client) so that the computer can be connected into the network system. a. Network card (LAN Cards) with ISA BNC and RJ45 connectors b. Network card (LAN Cards) with ISA BNC connectors Module 11 Repairs and / or perform Repeat Setting Network Connection

  6. b. Cables and connectors • using coaxial cable. • Cable or coaxial cable or RG-58 cable 10base2 (ten base two) has a range between 300 m and can reach over 300m using a repeater. • Connectors used in the bus network topology is to use BNC connectors. BNC connectors have 3 types namely: a. BNC connector BNC connector on the edge of paired-end of the coaxial cable.B. BNC Terminator BNC connectors on the ends of the paired-end of the Network with Bus topology that has a value of 50 ohm obstacles.c. TBNC Connector that is connected to the network card (LAN Cards) and to the BNC connector or to the terminator for the end of the network. Module 11 Repairs and / or perform Repeat Setting Network Connection

  7. 2. Repairs on the preparation of connectivity with Network Star topology • Network Card (Network Interface Card / LAN Card) A card jarinagn (LAN Card) is inserted in the expansion slot on the a computer motherboard and server workstation (client) so that computer can be connected into the network system. Module 11 Repairs and / or perform Repeat Setting Network Connection

  8. PCI connectors with BNC and RJ 45 PCI with RJ 45 connectors Module 11 Repairs and / or perform Repeat Setting Network Connection

  9. b) Cable and connector Cable used in the Network with a star topology is UTP (Unshielded Twisted Pair). UTP may have a transfer rate up to 10 Mbps with 100 Mbps, but have a shorter distance, namely maximum 100m. Module 11 Repairs and / or perform Repeat Setting Network Connection

  10. Connectors used in the star topology network with cable UTP (Unshielded Twisted Pair) which is using the RJ 45 connector and cable for mengepres using the special pliers Cramping tools a. RJ 45 connector b. Cramping tools Module 11 Repairs and / or perform Repeat Setting Network Connection

  11. Task 1 • Look Network that would fix konektifitasnya and Write! • Write types, functions and characteristics of equipment and materials used in the network topology and Star topology network with the Bus. • Record Requirements of tools and materials in accordance with the network topology that would regenerate konektifitasnya! Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  12. Network card is used for bus topology? • Cable is used for star topology? • Look on the internet step - preparation lankah network? Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  13. Repairs and / or perform Repeat Setting Network Connection Make improvements to the network connection HOME

  14. Learning Objectives • Training participants are able to check LAN device. • Training participants are able to change the network components that were damaged • Training participants able to perform corrective steps to prevent the spread of damage to the PC the other HOME Module 11 Repairs and / or perform Repeat Setting Network Connection

  15. 2. Make improvements to the network connection • Connectivity is an improvement action to repair or connect the client computer with the computer network. • The action is carried out including the installation and configuration of the device back replaced. Module 11 Repairs and / or perform Repeat Setting Network Connection

  16. Faulty Network Card (LAN Card) on the motherboard • Installation of network card on motherboar adapted to the network card is using the ISA or PCI. • ISA network card model can not be paired on the PCI slot and vice versa. • So the network card must be in accordance with the expantions slot. • Installation of network cards can be done anywhere in the slot for the slot is not used by other components or a blank. • when you move the components that already exist so when the computer will detect the windows back on all the components that will make this re-initialization occurs on windows 98, Windows 2000 and Windows XP. Module 11 Repairs and / or perform Repeat Setting Network Connection

  17. Installation of network cards may look like the image below: a. PCI network card model b. Motherboard c. ISA network card model Module 11 Repairs and / or perform Repeat Setting Network Connection

  18. 2. Installation of the USB connector • Installation of coaxial cable and BNC connector Installation of coaxial cable and BNC connectors must be done with caution should not occur until the short or connect because it can cause a short cable that we create a network system to be down. • Installation of UTP cable and RJ 45 connector There are 2 methods of using UTP cable: 1. Go straight cable (Straight Cable) > Straight cable (Straight Cable) is a system of wring     edge with the other one is the same. > Straight cable (Straight Cable) is used to connect     between workstation (Client) with the Hub / Switch. Module 11 Repairs and / or perform Repeat Setting Network Connection

  19. Go straight wiring scheme is between the plug connector 1 with 2 as follows: Module 11 Repairs and / or perform Repeat Setting Network Connection

  20. 2. Cross cable (Crossover Cable) • Cross Cable (Crossover Cable) is a system wiring between the end of the one with the other mutual be crossed between delivery (Transmiter) data and the recipient (Resiver) data. • Cross Cable (Crossover Cable) is used to connect a Hub / Switch with the Hub / Switch or between two computers without using a hub. Cross-cable scheme (Crossover Cable) is between the plug connector 1 with 2 as follows: Module 11 Repairs and / or perform Repeat Setting Network Connection

  21. 3. Installation of the system connector on the Network A. Installation of coaxial cable with BNC connectors on the Network Bus topology > Installation of coaxial cable with BNC connectors on the Network with a bus topology using the T-Connector with a 50 ohm terminator on the end of the network. > Bus topology using a single cable to the second round where the ends is closed there is a cable node-node. Module 11 Repairs and / or perform Repeat Setting Network Connection

  22. B. Installation of UTP cable with RJ 45 connector on the Network with a Star topology   > Installation of UTP cable with RJ 45 connector on the Star topology each node is the node center / central as a counselor. > Topology is widely used in various places Module 11 Repairs and / or perform Repeat Setting Network Connection

  23. Task 2 • ISA network cards used in the slot? • What color cable Straight and Cross, and look for the differences? • BNC cables are cable? Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  24. ISA network cards used in the slot? • What color cable Straight and Cross, and look for the differences? • BNC cables are cable? Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  25. Repairs and / or perform Repeat Setting Network Connection Make re-setup to the network connection HOME

  26. Learning Objectives • Training participants capable of setting up a configuration • Training participants capable of setting up the configuration ip address HOME Module 11 Repairs and / or perform Repeat Setting Network Connection

  27. 4. The configuration (network card driver installation, the selection protocol, Charging IP Address, subnet mask and workgroup. If all the hardware has been installed correctly then the next step is the configuration software that can be done in a way:   a. Driver installation Network Card (LAN Card) > Installing the drivers is done when the network card has not been not detected due to support Plug and Play (PnP).      > Because the driver in the OS windows'98, so there is no need drivers from the default network card. Module 11 Repairs and / or perform Repeat Setting Network Connection

  28. Here's how you can do: • Click on windows start 98/me>> settings>> Control Panel • Click the network>> Configuration>> select the network card brand 3. Appears select and install the device Module 11 Repairs and / or perform Repeat Setting Network Connection

  29. 4. Next display card is detected After the network card detected or installed correctly then the next step is setting the protocol used. Module 11 Repairs and / or perform Repeat Setting Network Connection

  30. b. Protocol selection Image Description: 1. Select add on    Network configuration 2. Selecting a protocol 3. Click add 4. Select TCP / IP 5. Click OK Election protocol to be able to setting IP Address and subnet mask. Module 11 Repairs and / or perform Repeat Setting Network Connection

  31. c. The IP Address and Subnetmask • IP Address is the address that is unique in the computer network system. • IP Address grouped into five classes, Class A, Class B, Class C, Class D and Class E. • Subnetmask value to separate the network with the host id id. • Network ID and host ID in the IP address be distinguished by the use of subnetmask. Module 11 Repairs and / or perform Repeat Setting Network Connection

  32. Description of the image: 1. Select TCP / IP 2. Click Properties 3. Select specify an IP Address The IP Address and subnet Mask Must accordance with the Network Configuration System Used Module 11 Repairs and / or perform Repeat Setting Network Connection

  33. d. Elections workgroup • Elections workgroup to determine the groups which we call. • Workgroup name can also be called the Network Image Description: 1. Select Identification 2. Menu changes workgroup Module 11 Repairs and / or perform Repeat Setting Network Connection

  34. After configuration is complete connectivity in hardware and software improvements to the action may be spelled completed live testing do only. • Will then restart the computer and the dialog box to appear the user name and password. Charging dialog box for User Name and Password Module 11 Repairs and / or perform Repeat Setting Network Connection

  35. Task 3 • Try setting the configuration NIC! • Try to install the NIC drivers! • Try workgrouping your computer! Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  36. What is included in the configuration IP address? • How do I make the configuration work group? Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  37. Repairs and / or perform Repeat Setting Network Connection Checking the results of repair network connection HOME

  38. Learning Objectives • Training participants were able to conduct checks network connectivity back. • Training participants were able to conduct the test network connectivity • Training participants are able to create reports on the repair work that was done well and correctly HOME Module 11 Repairs and / or perform Repeat Setting Network Connection

  39. Checking the results of repair network connection Checking network connectivity is re-checking re-re-action from the beginning of the process include: a. Check the network card (LAN Card) is already installed properly or not b. Checking the Installation of cable connectors on the hub / switch or other connectors do not have short or open, c. Installation of the plug is not loose d. Setting the network card configuration and the software was correct in accordance with the provisions of both the network before installing the network card driver, Configuring IP Address, subnet mask and workgroup to be used. Module 11 Repairs and / or perform Repeat Setting Network Connection

  40. 2. Testing network connectivity Menu Searching in Computer Network • In the network we use the Computer Fine • In the dialogue we find omputer search by the name of the computer search. Module 11 Repairs and / or perform Repeat Setting Network Connection

  41. Search Results Based on the Computer Name in Network How to test the network connection can also be done with a double click on Network Neighborhood icon Module 11 Repairs and / or perform Repeat Setting Network Connection

  42. Another way that can be done to see if the computer has been connected to the network is to go on the windows explorer there will provide the full information. Ms Dos on windows type C:> ipconfig / all (IP Configuration) Module 11 Repairs and / or perform Repeat Setting Network Connection

  43. a more complete information can also be done by typing in the Ms Dos is C:> ipconfig / all | MORE Display Results ipconfig (IP Configuration) The End From the view on the whole ipconfig (all) Module 11 Repairs and / or perform Repeat Setting Network Connection

  44. Ping utility is used for the connectivity that occur with the number of IP address please contact us. • The command ping 10.1.1.1 for IP Address, if we see a response message from Replay No IP Address 10.1.1.1 IP is meant to give a reply on the ping command that we provide. • If the address is active or not to be contacted does not have the data displayed will Request Time Out (IP Address unknown) Module 11 Repairs and / or perform Repeat Setting Network Connection

  45. After a test on each network computer system may have been connected with both. • Network system can be used for data sharing or printer, modem (Internet) and so forth. Step do Sharing or Data Directory: a. Select the directory that will be in data sharing b. Option selection sharing data Module 11 Repairs and / or perform Repeat Setting Network Connection

  46. Step Do Printer Sharing Start setting the printer Select a printer in the which will be shared Module 11 Repairs and / or perform Repeat Setting Network Connection

  47. Step Do Printer Sharing (Continued) Option selection sharing printers Sharing made by the Client Computer Name siji.com Module 11 Repairs and / or perform Repeat Setting Network Connection

  48. Task 4 • Try what is covered before! • Look for information on how to testing a network! Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  49. How do I look for in a computer network? • How do I mensharing printer? Modul 11 Melakukan Perbaikan dan / atau Setting Ulang Koneksi Jaringan

  50. REFERENCES Dikmenjur, 2004, Melakukan Perbaikan dan atau Setting Ulang Koneksi Jaringan,Modul TKJ, Dikmenjur, Jakarta HOME Module 11 Repairs and / or perform Repeat Setting Network Connection

More Related