1 / 11

Electromagnetic interference

Electromagnetic interference. A number of digital hearing aid users have reported occasional loud noises when using their fm system Occurrences were unpredictable Mostly noticed when the transmitter was turned off The sound was a ‘whooshing’ noise. FM Receiver. Electromagnetic interference.

noreen
Download Presentation

Electromagnetic interference

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electromagnetic interference • A number of digital hearing aid users have reported occasional loud noises when using their fm system • Occurrences were unpredictable • Mostly noticed when the transmitter was turned off • The sound was a ‘whooshing’ noise

  2. FM Receiver Electromagnetic interference • We have identified the cause to be ElectroMagnetic Interference (EMI) generated by DSP hearing aids • As the d/i lead is also the aerial, any radio interference from a hearing aid travels directly into the receiver

  3. EMI testing of DSP aids The tests were carried out in a RF (Radio Frequency) screened chamber • The hearing aid was placed in the test chamber with the direct input shoe and lead connected

  4. Diagram of Test setup

  5. Background noise from test system up to 10MHz, as displayed by the spectrum analyser with the hearing aid switched off

  6. Harmonic structure of DSP aid interference up to 10MHz Note the DSP clock at 991KHz and its many harmonics

  7. Wideband harmonic structure of DSP aid interference up to 500MHz using 400mm d/i lead fm systems work here USA UK USA Note the peak at approx 120MHz near fm systems The peak moves to lower frequencies as the d/i lead length increases

  8. Zoomed in structure of interference near 174MHz (UK fm systems) – animated sequence The peaks are EMI noise from the hearing aid – they move with time and will eventually cross the fm receiver frequency, which is why noise is only sometimes heard.

  9. The fundamental processor clock frequency in the DSP aid running at around 1MHz is not stable • The frequency drifts with time, battery level, temperature & processor activity • At the 72nd harmonic (72MHz-USA fm) any frequency drift is 72 times larger • At the 174th harmonic (174MHz-UK fm) any frequency drift is 174 times larger • This means that the EMI drifts across all fm receiver frequencies at some time

  10. Objectives • To raise awareness of the issue • To encourage hearing aid manufacturers to improve their designs

  11. Solutions • Some DSP hearing aids produce much less interference than others so these will become preferred for use with fm systems • Keep the fm transmitter on when the receiver is in use • Use a transmitter microphone mute facility when sound is temporarily not needed • Switch off receiver when not needed

More Related