1 / 13

Electromagnetic Interference from Wind Turbines on Onsala Space Observatory

Electromagnetic Interference from Wind Turbines on Onsala Space Observatory. Eskil Bendz Johan Malmström ÅF-INFRASTRUKTUR AB. Outline . Introduction The Saab report Methods to calculate interference levels Main results The ÅF report Assessment of Saab report

tia
Download Presentation

Electromagnetic Interference from Wind Turbines on Onsala Space Observatory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electromagnetic Interference from Wind Turbines on Onsala Space Observatory Eskil Bendz Johan Malmström ÅF-INFRASTRUKTUR AB

  2. Outline • Introduction • The Saab report • Methods to calculate interference levels • Main results • The ÅF report • Assessment of Saab report • Other important considerations

  3. Introduction 34 Wind Turbines focus is the 10 encircled UMTS Radio Base Stations Purpose: Estimate and compare interference levels from direct signals and scattered signals [dBW/m2/Hz] 18 km Space Observatory

  4. The Saab report Approach: • Calculate direct signals from UMTS radio base stations • Calculate scattered signals from wind turbines • Compare the two levels of interference at Onsala

  5. Direct Signals Method: • Contribution from nearby radio base stations • Free space path loss at 2 GHz • Extra attenuation due to terrain profile (heights and vegetation) • Summarize all signals • Spectral power density: -132 dBW/m2/Hz

  6. Scattered Signals Method: • Divide wind turbine into two parts: • Tower - conical cylinder • Blades – elliptical cross section • Material – perfect electric conductor

  7. Scattered Signals Method: • Spherical wave • Scattering cross section from each segment

  8. Scattered Signals Method: • Calculate contribution from base stations close to the 10 wind turbines • 10 towers - spectral power density: -164 dBW/m2/Hz • One blade - spectral power density (maximum): -164 dBW/m2/Hz

  9. Main results • Both signals above recommended -250 dBW/m2/Hz @ 2 GHz • Direct signal is 32 dB higher than scattered signals (~1500 times) • or Scattered signals increase interference level <0.1%

  10. The ÅF report • Assessment of the Saab report found no severe errors • Simplifications overestimated the direct signals E.g. down-tilt reduce direct signals in the Saab report 6-8 dB

  11. Adjusted signal levels • New values: • Direct signal: -142 dBW/m2/Hz (Saab: -132 dBW/m2/Hz) • Scattered signals: -159 dBW/m2/Hz (Saab: -164 dBW/m2/Hz) • Direct signal still 17 dB higher than scattered signals (~50 times)

  12. Other important considerations Direct emission from radio base stations contributes largely to the interference level • E.g. UMTS, GSM, LTE • Direction of antennas • Usually three antennas at a site, covering 120 each • Suggestions to decrease interference level: • Turn off sectors • Rearrange antenna directions to obtain a ”zero” • Rearrange antenna away from telescopes • Increase down-tilt (10 might be obtained) • In accordance with mobile telephone service providers

  13. Other important considerations Some other sources that might contribute to the interference level are: • Neighboring radar stations (high power sources) • Wireless radio links (narrow beam width) • Harmonics or intermodulation products

More Related