1 / 9

ICSat Assembly Plan

ICSat Assembly Plan. Location and Main Components. Miteq Power Amplifier (1 of 2). ICSat Communications Block. Miteq Low Noise Amplifier (1 of 2). Preliminaries. ICSat will be assembled in Rickover Hall at the U. S. Naval Academy using a Class 100,000 clean room.

nanji
Download Presentation

ICSat Assembly Plan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ICSat Assembly Plan

  2. Location and Main Components Miteq Power Amplifier (1 of 2) ICSat Communications Block Miteq Low Noise Amplifier (1 of 2)

  3. Preliminaries • ICSat will be assembled in Rickover Hall at the U. S. Naval Academy using a Class 100,000 clean room. • All metal decks, overheads, and bulkheads will be T6061 aluminum • All +5V, +12V, and GND lines will be 14-gauge wire. • The transmit and receive lines are both Coaxial cable.

  4. Aluminum Base plate • 1/16” T6061 Aluminum Base plate with forward bulkhead measured 10”x11”x4”. 1/6

  5. Securing Standoffs • Insert circuit board standoffs (24 total). 2/6

  6. Wire Harness Installation • All wiring and cabling will be cut and secured prior to circuit board installation • The layering shall be, from bottom to top: power lines (+5V, +12V, GND) discrete signal lines Coaxial Cable 3/6

  7. ComBlock Board Installation • Printed circuit boards will be mounted in the following order: • All electrical connections will be made as each board is secured to the standoffs. 4/6

  8. Low Power Amplifier Installation • Mount Mini-Circuits Low Power Amplifier. 5/6

  9. Attaching Cover Plate • T6061 Aluminum cover plate includes two interior bulkheads to dampen any possible interference. 6/6

More Related