1 / 10

Simulating Front-end Electronics and Integration with End-to-end Simulation

Simulating Front-end Electronics and Integration with End-to-end Simulation. Fukun Tang Enrico Fermi Institute University of Chicago. With Karen Byrum and Gary Drake (ANL) Henry Frisch, Mary Heintz and Harold Sanders (UC). Harold’s TOF System. dum.

maxine
Download Presentation

Simulating Front-end Electronics and Integration with End-to-end Simulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Simulating Front-end Electronics and Integration with End-to-end Simulation Fukun Tang Enrico Fermi Institute University of Chicago With Karen Byrum and Gary Drake (ANL) Henry Frisch, Mary Heintz and Harold Sanders (UC) Pico-Sec Simulation Workshop University of Chicago 12/12/06

  2. Harold’s TOF System dum Pico-Sec Simulation Workshop University of Chicago 12/12/06

  3. Time Stretcher TDC MCP_PMT Output Signal Start 500pS Reference Clock Stop Tw “fine” time interval psFront-end

  4. IBM SiGe BiCMOS 8HP Process • 130-nm Technology • SiGe Hetero-junction Bipolar Transistors • fT (high performance): 200GHz, BVceo=1.7V, BVcbo=5.9V • fT (high breakdown): 57GHz, BVceo=3.55V, BVcbo=12V • High-Q Inductors and Metal-Isolator-Metal Capacitors • 4 Types of Low-tolerance Resistors with Low and High Sheet Resistivity • n+ Diffusion, Tantalum Nitride, p+ Polisilicon and p- Polisilicon • Electrically Writable e-Fuse • CMOS Transistors (VDD=1.2V or 2.5/3.3V) • Twin-well CMOS • Hyperabrupt Junction and MOS Varactors • Deep Trench and Shallow Trench Isolations • 3 to 5 Copper Layers and 2 Aluminum Layers (up to 3 thick layers) • Wire-bond or Controlled Collapse Chip Connect (C4) Solder-bump Terminals

  5. Cadence Custom IC Design Flow for IBM 8HP Design Specification Library, tech files Virtuoso Schematic Schematic Capture Models Analog Design Environment (ADE) AMS Design Environment (AMS) Circuit Simulations Tech File, DRC, PCell Virtuoso XL Layout Chip Assembly Router Cell/Chip Layout Verification and RF Parasitic Extraction IBM 8HP PDK Tech File , DRC Assura DRC/LVC, RCX Post-Layout Simulations Models, RCX ADE, AMS Simulations Tech File Mask Generation GDSII Stream Out Tech, Foundry Rules Validation DRC, Filler Generation Tape-Out

  6. Interface to Other Simulation Tools ASCII files: Waveform time-value pair ASCII files: Waveform time-value pair Tube Output Signals from Simulation Cadence Virtuoso Analog Environment Or Cadence Virtuoso AMS Environment System Simulation Results Tube Output Signals from Scope Spectre Netlist Spectre Library Spectre Netlist (Cadence Spice) Custom Chip Schematic IBM 8HP PDK Cadence Simulator

  7. Waveform Time-value Pair Format

  8. 02/2007 MOSIS Submission (2GHz VCO) 2GHz VCO Schematics Simplified VCO Core Schematic • SiGe HJT, negative resistance differential VCO • On-chip high-Q LC tank • High Frequency PN diode Varactors • Capacitor voltage dividers • 50-ohm line drivers

  9. VCO Simulation Result Output Waveforms Phase Noise -97dBc/HzEquivalents to Cycle-to-cycle time-jitter of 5 fs V-F Transfer Function Tuning Range=7.5%

  10. Conclusion We entered a completely different world than most of us live in. We have lots to learn, lots need to be done. A journey of 1000 miles begins with a single step. ---Lao Tzu (Laozi), 600 B.C. Pico-Sec Simulation Workshop University of Chicago 12/12/06

More Related