1 / 74

Signals and Noise

Signals and Noise. Jan 29, 2002. Announcement. Homework-Chapter 2, Problems 2, 6, 8, 12, 16, 18 Recommended Problems: 13, 15, 23 Email: ebonilla@gmu.edu TA: Alexe Lue, aleu@gmu.edu http://teal.gmu.edu/ececourses/tcom500/spring2002/ Change in schedule. Class Objectives. Review

lance
Download Presentation

Signals and Noise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Signals and Noise Jan 29, 2002

  2. Announcement • Homework-Chapter 2, Problems 2, 6, 8, 12, 16, 18 • Recommended Problems: 13, 15, 23 • Email: ebonilla@gmu.edu • TA: Alexe Lue, aleu@gmu.edu • http://teal.gmu.edu/ececourses/tcom500/spring2002/ • Change in schedule

  3. Class Objectives • Review • Fundamentals of Signals • Mathematical concepts • Signal-to-Noise Ratio • Noise Figure • Bit Error Rate • Channel Capacity

  4. Fundamentals of Electric Signals • Electrical signals are created by the flow of electrons • Electrons flow from high charge potential to lower charge potential (EMF) • Circuits are conductive paths that direct the flow of electrons

  5. Frequency • The number of complete cycles of sinusoidal variation per unit time • 1 Cycle per second = 1 Hertz = 1 Hz • 1000 cycles per second = 1000 Hz = 1kHz • 1,000,000 cycles per second = 1 MHz • 1,000,000,000 Hz = 1 GHz

  6. Frequencies 1Hz, 2, 10, 20 Hz

  7. Sine Wave • Peak Amplitude (A) • maximum strength of signal • volts • Frequency (f) • Rate of change of signal • Hertz (Hz) or cycles per second • Period = time for one repetition (T) • T = 1/f • Phase () • Relative position in time

  8. PeriodicSignals

  9. Frequencies • Acoustic frequencies: • human speech: 100 Hz to 7 kHz • Music: up to 20 kHz • ultrasounds: above 20 Khz to 1 MHz • Electromagnetic carrier frequencies: • AM radio broadcast (example) 710 kHz • FM broadcast 89 MHz- 108 MHz • TV broadcasting 150 MHz- 900 MHz • Cellular telephony ~ 1 GHz

  10. Acoustic Spectrum

  11. Continuous & Discrete Signals

  12. Frequency Domain Concepts • Signal can be made up of many frequencies • Components are sine waves • Frequency domain functions can be plotted • Changes in the time domain affects the signal in the frequency domain

  13. Addition of Frequency Components

  14. Time-Frequency Domain

  15. Spectrum & Bandwidth • Spectrum • range of frequencies contained in signal • Absolute bandwidth • width of spectrum • Effective bandwidth • Often just bandwidth • Narrow band of frequencies containing most of the energy • DC Component • Component of zero frequency

  16. Signal with DC Component

  17. Data Rate and Bandwidth • All transmission systems have a limited band of frequencies • Data Rate: the amount of data that is transmitted in a unit time (one second) • Limited bandwidth results in limited data rate

  18. Analog and Digital Data Transmission • Data • Entities that convey meaning • Signals • Electric or electromagnetic representations of data • Transmission • Communication of data by propagation and processing of signals

  19. Data • Analog • Continuous values within some interval • e.g. sound, video • Digital • Discrete values • e.g. text, integers

  20. Signals • Means by which data are propagated • Analog • Continuously variable • Various media • wire, fiber optic, space • Speech bandwidth 100Hz to 7kHz • Telephone bandwidth 300Hz to 3400Hz • Video bandwidth 4MHz • Digital • Use discrete components (mostly two DC components)

  21. Data and Signals • Past: digital signals for digital data and analog signals for analog data • Present: digital signals for both digital and analog data • Can use analog signal to carry digital data • Phone Modem • Can use digital signal to carry analog data • Compact Disc audio

  22. Analog Signals Carrying Analog and Digital Data

  23. Digital Signals Carrying Analog and Digital Data

  24. Analog Transmission Characteristics • Analog signal transmitted without regard to content • Vulnerable to noise • Attenuated over distance • Use amplifiers to boost signal (& noise)

  25. Digital Transmission Characteristics • Content sensitive • Integrity endangered by noise, attenuation etc. • Repeaters are used to regenerate signal • Extracts bit pattern • Retransmits • Attenuation is overcome • Noise is not amplified

  26. Advantages of Digital Transmission • Digital technology • Low cost LSI/VLSI technology • Data integrity • Longer distances are possible • Error correction • Capacity utilization • High bandwidth links economical due to efficiency • High degree of multiplexing easier with digital techniques • Security & Privacy • Encryption • Integration • Can treat analog and digital data similarly

  27. Transmission Impairments • Transmitted signal must be compatible with receiver • Analog - degradation of signal quality • Digital - bit errors • Signal degradation causes include: • Attenuation and attenuation distortion • Delay distortion • Noise • Interference

  28. Attenuation • Signal strength falls off with distance • Depends on medium • Attenuation is an increasing function of frequency • Received signal strength: • must be enough to be detected • must be sufficiently higher than noise to be received without error

  29. Attenuation & Delay Distortion • Attenuation varies with frequency • Certain frequencies are attenuated more than others • Propagation velocity varies with frequency • Some frequencies arrive earlier than others, results in modifying the phase

  30. Noise & Interference • Unwanted signals inserted between transmitter and receiver • Thermal • Due to thermal agitation of electrons • Uniformly distributed (White noise) • Intermodulation • Signals that are the sum and difference of original frequencies sharing a medium • Interference • Identifiable, man-made noise

  31. Noise & Interference • Crosstalk • A signal from one line is picked up by another • Impulse • Irregular pulses or spikes • e.g. External electromagnetic interference • Short duration • High amplitude

  32. Effects of Noise on a Signal

  33. Gaussian Noise Distribution

  34. Crosstalk

  35. Break

  36. Topics – 2nd Half • Decibels • Signals and Noise • Signal-to-noise ratio • BER, Channel capacity • Noise types

  37. On-line resources for basic concepts of Electricity Electric circuits http://www.fclabs.com.au/onlinesamples/ec/elect01/els01dx.htm Animation of Ohm's law http://www.phy.ntnu.edu.tw/java/rc/rc.html Animation of an RLC circuit with AC currents http://www.phy.ntnu.edu.tw/java/rlc/rlc.html Animation of a clipping circuit http://www.phy.ntnu.edu.tw/java/electronics/clip_e.html Animation of Fourier synthesis of oscillatory signals http://www.phy.ntnu.edu.tw/java/sound/sound.html Propagation of Electromagnetic Wave http://www.phy.ntnu.edu.tw/java/emWave/emWave.html

  38. Electric Power If an electric current flows through a resistance R thenthe power dissipated is rms = root-mean-square value If voltage V varies in time, then the average power dissipated is proportional to its rms value

  39. Signal Power Gain/Loss Quantity of interest: (Output Signal Power)/(Input signal power)

  40. .

  41. Decibels • Decibel, dB, is a measure of a relative amplitude (or power) of a signal, be it acoustic or electric • The term “relative” means that we are measuring the ratio of the given amplitude to another amplitude, for example the ratio of the amplitude (Volts) at the end of the phone line to the amplitude (Volts) at the beginning of the phone line • In acoustics, the decibel is a measure of the relative level of sound or noise compared to some standardized level of sound or noise. One decibel (0.1 bel) equals 10 times the logarithm of the power ratio of the given sound to the power of the sound barely perceptible by human ear.

  42. Decibels in Acoustics

  43. Log Base 10

  44. Linear vs Logarithmic

  45. Decibels – Power Gain/Loss

  46. Decibels – Power Gain/Loss

  47. .

  48. .

  49. Decibels - Voltage

More Related