1 / 22

Background on Gigabit Ethernet

Background on Gigabit Ethernet. ECE 4006 C G3: Karen Cano , Scott Henderson , Di Qian Dec, 5 2002. Ethernet History (Timeline). 1973 – (2.94Mbps) First developed at Xerox’s Palo Alto Lab (Robert Metcalfe and David Boggs)

jesperanza
Download Presentation

Background on Gigabit Ethernet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Background on Gigabit Ethernet ECE 4006 C G3: Karen Cano, Scott Henderson, Di Qian Dec, 5 2002

  2. Ethernet History (Timeline) • 1973 – (2.94Mbps) First developed at Xerox’s Palo Alto Lab (Robert Metcalfe and David Boggs) • 1979 - (10Mbps) Improvement by DEC, Intel and Xerox. The DIX standard. Thick Ethernet System • 1983 - Formally standardized as IEEE 802.3

  3. Timeline (con’t) • 1983–1989 – Improvements on bus topology and transmission distance. • 1990 – version IEEE 802.3i, 10Base-T technology. • 1995 - (100Mbps) version IEEE 802.3u, also call “Fast Ethernet”.

  4. Timeline (con’t) • 1998 – (1 Gbps) version IEEE 802.3z, fiber optics; and IEEE 802.3ab, twisted pair. Also know as “Gigabit Ethernet”. • Present – (10 Gbps) standard completed in 2002.

  5. Project Tasks • 1. Research on the transmitting and receiving modules. • 2. Examine the testing board • 3. Search for the components • 4. Testing the evaluation board with purchased components • 5. Connecting the purchased components with parts from other groups.

  6. Project Goal • Duplicate the data transmitting and receiving module functionality of the Gigabit Ethernet technology with purchased components that provide optimum performance at a minimum price.

  7. Possible Solutions • Transmitting module (laser source) • VCSEL • Receiving module (Photo-detector) • PIN photodiode • Other Specs: - SC connectorized (optical) - SMA connectorized (electrical) - 850nm - Multimode (fiber) - relatively low cost

  8. Laser Basics • What is a Laser? • Light Amplification by Stimulated Emission of Radiation • How? 1) Electrons in low-energy levels bumped into high levels by injection of energy 2) When an electron drops to a lower energy level, excess energy is given off as light.

  9. VCSELs • Vertical Cavity Surface Emitting Lasers • Physical makeup • Bragg mirrors • Active region • Fabrication techniques • Molecular beam epitaxy • Vapor phase epitaxy

  10. VCSELs • In EELs no pre-cleaving tests can be performed, testing VCSELs is much cheaper • Less current required for VCSELs • Output beam easier couple into fiber and much less divergent than EELs • Smaller and faster than EELs

  11. VCSELs vs. EELs • Edge Emitting Lasers - give out their light from the sides or edges, therefore no pre-cleaving tests can be performed • Since VCSELs emit light from the top and bottom, they do not have this problem. Testing them is much cheaper

  12. Interesting Facts • In a typical VCSEL, as many as 60 individual semiconductor layers are stacked within a structure 10 microns thick. • 20,000 individual laser die can be fabricated on a single 3 inch wafer.

  13. Multimode • Multimode- light is injected into the core and can travel many paths through the cable (i.e. rattling in a tube). • Each path is slightly different in length, so the time variance this causes, spreads pulses of data out and limits the bandwidth.

  14. Singlemode • Fiber has such a narrow core that light takes one path only through the glass. • Not limited to modal-bandwidth. • Very small amount of pulse-spreading is consequential only in Gigabit speed applications.

  15. Photodetectors • Necessary for light pulse detection • Wide variety of of types • Photoconductors • Avalanche photodiodes • PIN photodiodes • MSM photodiodes

  16. Photoconductors • Operation based on varying conduction • Many important factors affecting bandwidth • Transit time • Surface area of photon acceptor region • Noise ratio (Johnson noise) • Quantum efficiency

  17. Avalanche Photodiodes • Exemplify the “gain-bandwidth” tradeoff • Use the p-n junction model to operate • Take advantage of the avalanche effect • Carrier multiplication • Associated gain • Time constant associated with avalanche • Bandwidth penalty

  18. PIN Photodiode • PIN • Reason for name • Doped region, undoped region, doped region • Unity gain • Functions under reverse bias • Most important parameter for operation • Transit time

  19. Bandwidth vs. Depletion Width • Transit time • Time for subatomic particle to get from one electrode to the other • Based on quickest, typically electron • e- mobility > h+ mobility • Capacitance limited

  20. Transit Time (continued) • Dependence on intrinsic region length • Minimizing this region • High bandwidth applications

  21. MSM Photodiode • Metal-Semiconductor-Metal • Associated work functions • Atomic level metal-semiconductor marriage • High speed (up to 100GHz) • Majority carrier devices • Not developed for Gigabit Ethernet on scale as large as PIN

  22. Concluding, thus far….. • Obvious choices for devices: • VCSEL@850nm • PIN photodiode w/ acceptable bandwidth • Multimode fiber • SC optical connectors • SMA electrical connectors • Gigabit Ethernet is a popular application • If you are buying less than five-million devices then be prepared to stand at the end of the line.

More Related