1 / 17

The STAR-PXL sensor and electronics Progress report for F2F

The STAR-PXL sensor and electronics Progress report for F2F . Talk Outline. Technical progress (since last F2F on January 10, 2012) Expected progress for the next 6 months Directed points for subsystems. Technical Progress (Sensor). Tests conducted by IPHC at DESY

jayme
Download Presentation

The STAR-PXL sensor and electronics Progress report for F2F

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The STAR-PXL sensor and electronics Progress report for F2F

  2. Talk Outline • Technical progress (since last F2F on January 10, 2012) • Expected progress for the next 6 months • Directed points for subsystems

  3. Technical Progress (Sensor) Tests conducted by IPHC at DESY Meets PXL sensor requirements

  4. Technical Progress (Sensor) • Mimosa-28 (PXL Sensor) redesign is complete. The list of modifications was shown in the last F2F meeting. All hardware including probe testing is compatible with both versions of the PXL sensor. The submission will take place after initial ladder testing at IPHC. This is to allow for as much testing as possible before final silicon is ordered. • 11 wafers of PXL sensors (version 1) are thinned and diced and awaiting probe testing. The yield for the mechanical processing was an acceptable 93%. A full report can be found at http://rnc.lbl.gov/hft/hardware/docs/yield_for_11_wafers_2011_12_13.docx

  5. Ultimate probe testing card Sensor wire bonded to the probe card to test the full functionality of the probe card and testing system before the probes are mounted to the card. • The probe cards have been tested for functionality and with the scripted testing. • Testing results allowed us to load and send out 2 probe cards to have the probe pins loaded. They will be at LBNL by Wednesday of this week. Testing by hand (not integrated into database) will begin soon thereafter.

  6. PXL RDO Board Architecture 6 m (24 AWG TP) 2 m (42 AWG TP) Mass Termination Board (signal buffering) + latch-up protected power Clk, config, data Clk, config, data, power USB RDO motherboard w/ Xilinx Virtex-5/6 FPGA Daughter card SlowCont PC RDO PC with fiberlink to RDO board 100 m (fiber optic) PXL built events Slow control, Configuration, etc. • Highly parallel system • 4 ladders per sector • 1 Mass Termination Board (MTB) per sector • 1 sector per RDO board • 10 RDO boards in the PXL system • 1 Trigger TCD interface board TCD Board Trigger

  7. Production Prototype RDO System V1.1 • 5 PCBs at LBNL and 2 are loaded. • 2 boards loaded with solderlesssocketed FPGAs • All fixes from V1.0 implementation. New BUSY handling design. FPGA configuration, configuration from flashXL, SIU (fiber optic connection) and USB all tested and working. Data path testing will continue.

  8. Other PXL RDO system components • MTB – schematic complete. Layout as per HW mechanical design envelopes is in progress at IPHC. • Daughter-card (for RDO motherboard) – Layout complete and boards have been fabricated. Boards shipped and will arrive today. Loading and testing will follow shortly. • TCD interface board – Boards are in hand and loaded. Testing will begin shortly. • Interface boards – Design and layout complete. The fabrication PO will be sent out this week.

  9. Technical Progress (Cable) • FR-4 prototypes are at LBNL • Kapton version under design (if testing shows that the existing design is satisfactory) • Possible submission to CERN PCB shop after completion of ladder testing at IPHC

  10. Recent Documentation • Report on VHDCI cable testing • Mechanical thinning yield report • Draft ladder assembly documentation • Draft slow controls plan • Schematics and layout files for production prototype V1.1 RDO system Is anything else required for the July review?

  11. Simplified schedule

  12. directed points for sub-systems • Critical items/tasks for run-13 installation • Critical items/tasks for run-14 installation • Needs for CF shop • Revisit risk list in view of schedule updates, and task accomplished so far. • Major upcoming procurements. • Survey plans and software (Spiros) • Upcoming internal Reviews – None? Mechanical? • Cooling Plan – See HW’s talk

  13. Critical items/tasks for run-13 installation • Full ladder development chain • Probe testing • Ladder testing • Ladder assembly production • Full mechanical production chain (see HWs talk) • Sectors • Cooling system • Metrology • Software • Metrology to tracking points • Tracking • Firmware and software for cosmic ray / beam tests • Slow control

  14. Critical items/tasks for run-14 installation • If the previous list of critical tasks for run-13 is completed successfully, the production of sensors, RDO electronics, sectors and mechanical components for run-14 should be a simple production of already vetted components. • Problem(s) uncovered in the engineering run will form the core of the critical task list for run-14. We will need to see what develops.

  15. Needs for CF shop All mechanical parts for the PXL detector. This will be detailed in HW’s presentation. Technician labor for ladder and sector assembly. This will be augmented by ETs including RW, JW, JB.

  16. Revisit Risklist • We will expire the 1.2.2.2 “PXL sensor meet requirements” risk after testing the Ultimate 2 first run sensors (late summer 2012). • The “skilled non-costed staff unavailable” risk has been exercised. • Other risks still appropriate.

  17. Major upcoming procurements. Moderate procurements expected • Production prototype sensors engineering run (~$171k) • RDO production Motherboards (~ $40k) • Flex Cables (~ $20k) • RDO MTBs (~ $15k) • SIU and RORC RDO modules (~$30k)

More Related