1 / 35

Introduction to Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs)

Introduction to Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs). MOSFET. History Structure Future Review Threshold Voltage I-V Characteristics Modifications to I-V: Depletion layer correction (Sup. 3) Mobility, Vsat Short Channel Effects Channel Length Modulation

huntm
Download Presentation

Introduction to Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction toMetal-Oxide-SemiconductorField Effect Transistors(MOSFETs)

  2. MOSFET • History • Structure • Future • Review • Threshold Voltage • I-V Characteristics • Modifications to I-V: • Depletion layer correction (Sup. 3) • Mobility, Vsat • Short Channel Effects • Channel Length Modulation • Channel Quantum Effects • MOSFET Scaling and Current Topics (Literature + Sup. 3) • Subthreshold Behavior • Damage and Temperature (Sup. 3) • Spice (Sup. 3) • HFET, MESFET, JFET, DRAM, CCD (Some in Sup. 3)

  3. MOSFET History (Very Short!) • First Patents: • 1935 • Variable Capacitor Proposed: • 1959 • Silicon MOS: • 1960 • Clean PMOS, NMOS: • Late 1960s, big growth! • CCDs: • 1970s, Bell Labs • Switch to CMOS: • 1980s

  4. gate: metal or heavily doped poly-Si G body B source S drain D metal oxide p n+ n+ W L Structure: n-channel MOSFET(NMOS) IG=0 (bulk or substrate) ID=IS y IS x

  5. MOSFET Future (One Part of) • International Technology Roadmap for Semiconductors, 2008 update. • Look at size, manufacturing technique.

  6. From Intel

  7. gate: metal or heavily doped poly-Si G body B source S drain D metal oxide p n+ n+ W L Structure: n-channel MOSFET(NMOS) IG=0 (bulk or substrate) ID=IS y IS x

  8. MOSFET Scaling ECE G201

  9. Gate prevents “top” gate Fin (30nm) BOX

  10. D G B (IB=0, should be reverse biased) S Circuit Symbol (NMOS)enhancement-type: no channel at zero gate voltage ID= IS IG= 0 G-Gate D-Drain S-Source B-Substrate or Body IS

  11. gate: metal or heavily doped poly-Si G body B source S drain D metal oxide p n+ n+ W L Structure: n-channel MOSFET(NMOS) IG=0 (bulk or substrate) ID=IS y IS x

  12. Energy bands (“flat band” condition; not equilibrium) (equilibrium)

  13. gate G body B source S drain D + - n++ oxide p n+ n+ W L Flatbands! For this choice of materials, VGS<0n+pn+ structure  ID ~ 0 VD=Vs

  14. gate G body B source S drain D + - n++ oxide p n+ n+ W L Flatbands < VGS < VT (Includes VGS=0 here).n+-depletion-n+ structure  ID ~ 0 VD=Vs +++

  15. gate G body B source S drain D + - VD=Vs +++ +++ +++ n++ oxide p n+ n+ - - - - - W L VGS > VTn+-n-n+ structure  inversion

  16. Channel Charge (Qch) VGS>VT Depletion region charge (QB) is due to uncovered acceptor ions Qch

  17. n++ p n+ n+ W L (x) Ec(y) with VDS=0

  18. Increasing VGS decreases EB EB EF ~ EC y 0 L

  19. B S D + - +++ VGS1>Vt +++ metal oxide p n+ - - - - n+ Triode Region A voltage-controlled resistor @small VDS ID increasing VGS B S D - + +++ VGS2>VGS1 +++ +++ G metal oxide p n+ n+ - - - - - - VDS cut-off B 0.1 v S D + - +++ VGS3>VGS2 +++ +++ Increasing VGS puts more charge in the channel, allowing more drain current to flow +++ metal oxide p n+ - - - - - - - - - n+

  20. gate G body B source S + drain D - VDS large +++ +++ +++ metal oxide p n+ n+ Saturation Regionoccurs at large VDS As the drain voltage increases, the difference in voltage between the drain and the gate becomes smaller. At some point, the difference is too small to maintain the channel near the drain  pinch-off

  21. gate G body B source S + drain D - VDS large +++ +++ +++ metal oxide p n+ n+ Saturation Regionoccurs at large VDS The saturation region is when the MOSFET experiences pinch-off. Pinch-off occurs when VG - VD is less than VT.

  22. gate G body B source S + drain D - VD>>Vs +++ +++ +++ metal oxide p n+ n+ Saturation Regionoccurs at large VDS VGS - VDS < VT or VGD < VDS > VGS - VT VT

  23. Saturation Regiononce pinch-off occurs, there is no further increase in drain current saturation ID triode VDS>VGS-VT increasing VGS VDS<VGS-VT VDS 0.1 v

  24. Band diagram of triode and saturation

  25. Simplified MOSFET I-V Equations Cut-off: VGS< VT ID = IS = 0 Triode: VGS>VT and VDS < VGS-VT ID = kn’(W/L)[(VGS-VT)VDS - 1/2VDS2] Saturation: VGS>VT and VDS > VGS-VT ID = 1/2kn’(W/L)(VGS-VT)2 where kn’= (electron mobility)x(gate capacitance) = mn(eox/tox) …electron velocity = mnE and VT depends on the doping concentration and gate material used (…more details later)

  26. Energy bands (“flat band” condition; not equilibrium) (equilibrium)

  27. Channel Charge (Qch) VGS>VT Depletion region charge (QB) is due to uncovered acceptor ions Qch

  28. Threshold Voltage Definition VGS = VT when the carrier concentration in the channel is equal to the carrier concentration in the bulk silicon. Mathematically, this occurs when fs=2ff , where fsis called the surface potential

More Related