1 / 27

Chapter 5

ERT 210/4 Process Control & Dynamics. DYNAMIC BEHAVIOR OF PROCESSES : Dynamic Behavior of First-order and Second-order Processes. Chapter 5. COURSE OUTCOME 1 CO1) 1. Theoretical Models of Chemical Processes 2. Laplace Transform 3. Transfer Function Models

edric
Download Presentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ERT 210/4Process Control & Dynamics DYNAMIC BEHAVIOR OF PROCESSES : Dynamic Behavior of First-order and Second-order Processes Chapter 5

  2. COURSE OUTCOME 1 CO1) 1. Theoretical Models of Chemical Processes 2. Laplace Transform 3. Transfer Function Models 4. Dynamic Behavior of First-order and Second-order Processes DEFINE, REPEAT, APPLY and DERIVE general process dynamic formulas for simplest transfer function: first-order processes, integrating units and second-order processes 5. Dynamic Response Characteristics of More Complicated Processes 6. Development of Empirical Models from Process Data Chapter 5

  3. Dynamic Behavior • In analyzing process dynamic and process control systems, it is • important to know how the process responds to changes in the • process inputs. • Process inputs falls into two categories: • 1. Inputs that can be manipulated to control the process • 2. Inputs that are not manipulated, classified as disturbance • variables • A number of standard types of input changes are widely used for • two reasons: Chapter 5 • They are representative of the types of changes that occur in plants. • They are easy to analyze mathematically.

  4. Standard Process Inputs Chapter 5

  5. Step Input • A sudden change in a process variable can be approximated by a step change of magnitude, M: = Chapter 5 The step change occurs at an arbitrary time denoted as t = 0. • Special Case: If M = 1, we have a “unit step change”. We give it the symbol, S(t). • Example of a step change: A reactor feedstock is suddenly switched from one supply to another, causing sudden changes in feed concentration, flow, etc.

  6. Example: The heat input to the stirred-tank heating system in Chapter 2 is suddenly changed from 8000 to 10,000 kcal/hr by changing the electrical signal to the heater. Thus, = and Chapter 5 • Ramp Input • Industrial processes often experience “drifting disturbances”, that is, relatively slow changes up or down for some period of time with a roughly constant slope. • The rate of change is approximately constant.

  7. We can approximate a drifting disturbance by a ramp input: = • Examples of ramp changes: • Ramp a set point to a new value rather than making a step change. • Feed composition, heat exchanger fouling, catalyst activity, ambient temperature. Chapter 5 • Rectangular Pulse • It represents a brief, sudden step change in a process variable that then returns to its original value.

  8. h 0 = XRP Chapter 5 Tw Time, t • Examples: • Reactor feed is shut off for one hour. • The fuel gas supply to a furnace is briefly interrupted.

  9. Chapter 5

  10. Sinusoidal Input • Processes are also subject to periodic, or cyclic, disturbances. They can be approximated by a sinusoidal disturbance: = Chapter 5 where: A = amplitude, w = angular frequency • Examples: • 24 hour variations in cooling water temperature. • 60-Hz electrical noise arising from electrical equipment and instrumentation.

  11. Impulse Input • Here, • It represents a short, transient disturbance. • Examples: • Electrical noise spike in a thermo-couple reading. • Injection of a tracer dye. Chapter 5 • Useful for analysis since the response to an impulse input is the inverse of the TF. Thus, Here,

  12. The corresponding time domain express is: where: = Chapter 5 Suppose . Then it can be shown that: Consequently, g(t) is called the “impulse response function”.

  13. Random Inputs • Many process inputs changes with time in such a complex manner that it is not possible to describe them as deterministic functions of time. • The mathematical analysis of the process with random inputs is beyond the scope of this chapter. Chapter 5

  14. Types of Dynamic Response Chapter 5

  15. Dynamic Response Chapter 5

  16. First-Order System:(Step Response) The standard form for a first-order TF is: where: = = Chapter 5 Consider the response of this system to a step of magnitude, M: Substitute into (5-16) and rearrange,

  17. Take L-1 (cf. Table 3.1), Let steady-state value of y(t). From (5-18), = t___ 0 0 0.632 0.865 0.950 0.982 0.993 Chapter 5 Note: Large means a slow response.

  18. First-Order System:(Ramp Response) • The ramp input (Eq. 5-8): • Eq. (5-22) implies that after an initial transient period. The ramp input yields a ramp output with slope equal to Ka, but shifted in time by the process time constant . Chapter 5 (5-22)

  19. Integrating Process Not all processes have a steady-state gain. For example, an “integrating process” or “integrator” has the transfer function: Chapter 5 Consider a step change of magnitude M. Then U(s) = M/s and, L-1 Thus, y(t) is unbounded and a new steady-state value does not exist.

  20. Common Physical Example: Consider a liquid storage tank with a pump on the exit line: • Assume: • Constant cross-sectional area, A. • Mass balance: • Eq. (1) – Eq. (2), take L, assume steady state initially, • For (constant q), Chapter 5

  21. Second-Order Systems • Standard form: which has three model parameters: Chapter 5 = = = • Equivalent form: =

  22. The type of behavior that occurs depends on the numerical value of damping coefficient, : It is convenient to consider three types of behavior: Chapter 5 • Note: The characteristic polynomial is the denominator of the transfer function: • What about ? It results in an unstable system

  23. Chapter 5

  24. Chapter 5

  25. Several general remarks can be made concerning the responses show in Figs. 5.8 and 5.9: • Responses exhibiting oscillation and overshoot (y/KM > 1) are obtained only for values of less than one. • Large values of yield a sluggish (slow) response. • The fastest response without overshoot is obtained for the critically damped case Chapter 5

  26. Chapter 5

  27. Rise Time: is the time the process output takes to first reach the new steady-state value. • Time to First Peak: is the time required for the output to reach its first maximum value. • Settling Time: is defined as the time required for the process output to reach and remain inside a band whose width is equal to ±5% of the total change in y. The term 95% response time sometimes is used to refer to this case. Also, values of ±1% sometimes are used. • Overshoot: OS = a/b (% overshoot is 100a/b). • Decay Ratio: DR = c/a (where c is the height of the second peak). • Period of Oscillation: P is the time between two successive peaks or two successive valleys of the response. Chapter 5

More Related