1 / 11

Why do we need to know the fields / map the magnets?

Why do we need to know the fields / map the magnets? Spectrometers and FCs and CCs have different purposes: FCs and CCs form the cooling channel Should have been built well enough to work Job of SS’s is to demonstrate that the cooling channel works

dante
Download Presentation

Why do we need to know the fields / map the magnets?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Why do we need to know the fields / map the magnets? • Spectrometers and FCs and CCs have different purposes: • FCs and CCs form the cooling channel • Should have been built well enough to work • Job of SS’s is to demonstrate that the cooling channel works • Field must be well known for tracker reconstruction • Relative fields (or integrals) SS1 / SS2 must be known to better than a few parts in 10,000 • There is some coupling between SSs and coils in cooling chan. • Physically – fields overlap • Logically – need to time muons to first RF cavity •  Track muons from TOFs + Tracker  first cavity • Largest uncertainty in any prediction of cooling i.e. theory, is undoubtedly G4 implementation of multiple scattering

  2. MICE VI has • 18 coils • Many configurations of optics x momenta • ONLY central coil (+ maybe, End Coils) of SS will remain constant ~ 4T • Currents in other coils will change • Coils talk to each other over a few metres • e.g. ‘Uniform field’ region of SS sees field due to CC at ~ 0.5 percent • (see next page) • There is a lot of iron in the MICE hall • – but won’t make itself felt until CCs are installed (my belief). •  Cannot possibly map every configuration and use measured maps

  3. Effect of adjacent coils on field in Tracker Region of Spectrometer Solenoids

  4. What is to be done? • Sufficient measurements to: • Determine (check) the geometry of each coil alone • A few parameters: • – thickness, length, inner & outer radii and magnetic axis • –all wrt external fiducial marks • Check linearity • Measure at a few different excitations • Check superposition of fields due coils in same module • Measure with all coils in module energised at some • nominal currents • For reconstruction & simulation use fields calculated from dimensions of coils • It’s a moot point as to whether simulations should use real or ideal fields – in principle coils should give fields which are close enough to ideal, save for effect of iron in the hall...

  5. What’s needed? • Shall need: • Some code to calibrate / analyse output of CERN mapper • Not sure exactly what we get • Some means of calculating fields to sufficient precision • In 2D = (z,r) • In 3D = (x,y,z) – perhaps • Off-axis fields due to circular coils must be calculated numerically – elliptic integrals or numerical integration • Common sense

  6. Coil Mapping grid Cryostat Fiducial marks x x x x Survey wrt fiducials Installation / Alignment MAP / MEASURE Qualify Field quality Survey / calibrate coils FIELD CALCS Reduce / Parameterise … ON YES Good Enough? Simple Model Map for Software G4MICE MAP / MEASURE FIELD IN HALL VERIFY OPERA CALCULATIONS LONG-RANGE FIELD ERRORS

  7. Transverse fields linear in distance from axis and proportional to field gradient

More Related