FAST TRACK. tracking system Presentation. Acrobatics get in motion Artistes perform in front of big projection screens or float freely in the space over the heads of the audience. Live act and video projections blend together and have an effect of an exorbitant presentation.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Acrobatics get in motion
Artistes perform in front of big projection screens or float freely in the space over the heads of the audience. Live act and video projections blend together and have an effect of an exorbitant presentation.
Fast Track is a vertical rail and sledge system and was developed by TEAM EXTREME, primarily for artistic performances. There are unlimited possibilities for the creation of new forms of expression by the artistes. The coordination of horizontal and vertical rides at different speeds is the basis for
2-dimensional movements. The artists float through space apparently with weightlessness and can be positioned at any imaginable point of a given level.
4 passive sledges with single rope technology, computer control
Passive, filigree tracking system
Horizontal and vertical movements up to 4m/sec.
Respectively 2 highspeed winches are responsible
Drives are exactly programmable, 2-D software
Artistes are performing in their flights
Programmed, choreographed, dynamic arial images
Almost soundless sledgerides
Trussingtype - 50 x 50 cm 4-point traverse
1 raillineisneeded per artist
According to theshowtherecanbemounted 2 raillines on 1 traverseline
Length and distance of thesledges to eachotheris variable
Per pulley (diverterpulley/sleigh) at one point
At horizontal und vertikal steelrope, Fh= weightforce + dynamic
(artist 70kg (incl. ballast und costume) force incl. dyn ~ 1,5 kN, so Fh~1,5kN
Fres ~ 2,1kN resultant
Measurements of winches
length 1345 mm, width 100 mm, height 905 mm
weight 600 Kg / winch
Position of winchesareusually on theground
Theartist will befixedwith 2 ropes on his artisticbelt, left and right
Expenditure of time 1-2 days
theperiod of programmingisabout 8 hours
Adjustment of light programming, about. 3-4 hours
Cherry picker and forkliftisneeded
Power400V three-phase current 50 Hz, with proper neutral and earth must be assured!1 or 2 125 A CEE plug next to the winches, fused 125A time lag, with no other power consumers on this fuses.
It depends on number of winches.
If the power is provided by local generator its power capacity should be at least 120KVA, depends on the number
of winches as well. No other power consumers on this generator as well.
R C D
It is very important that there is no RCD or any other earth leakage protector of any kind in the whole power line!
If any existing RCD is not detachable, there must be a transformer to get ground free. The transformer must be
capable of 120 KVA, but depends on the number of winches.
There are no other power consumers allowed after the RCD, even if the generator would be big enough.
Any power failure is definitely serious and will end the show.
Any power failure during set-up or rehearsals will cause considerable delay.
In any case there will be no danger to artist or any participants.
1 desk / platform 1 x 2m, 2 chairs
220 V electricity
3 data cables will be installed
between the winches and the
Additional 1 Pavillion3 x 3 m
At cold temperatures appropriate
heating is necessary.
It is very important, that at any time the operator has a free sight to the action area.
Theactionarea and thespace of thewinches
flights / performance