1 / 12

Fault ride-through testing of wind turbines

Fault ride-through testing of wind turbines. Presented by: Olve Mo Paper co-authors: John Olav Tande Leif Warland Kjell Ljøkelsøy SINTEF Energy Research, Norway. Background. Grid codes now require wind farms to ride-through temporarily grid voltage dips (faults).

zelig
Download Presentation

Fault ride-through testing of wind turbines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fault ride-through testing of wind turbines Presented by: Olve Mo Paper co-authors: John Olav Tande Leif Warland Kjell Ljøkelsøy SINTEF Energy Research, Norway

  2. Background • Grid codes now require wind farms to ride-through temporarily grid voltage dips (faults). • Full scale tests against different grid codes is not practical • IEC 61400-21 ed2 (CD 2006) presents a standardized test for characterizing the wind turbine response to a voltage dip • The result of the standardized tests can be used to validate a numerical simulation model of the wind turbine. • The validated simulation model can then to be used to check compliance to different grid codes

  3. Scope • Can numerical simulations models be used to accurately predict ride-through capabilities of a fixed speed, direct connected induction generators? • Will the results of the new standardized test provide useful results for validation of such models?

  4. IEC 61400-21 ed2 (CD 2006)

  5. Motor Generator Laboratory test setup

  6. Short circuit emulator only (IG discon.) Small dip setup Large dip setup Instantaneous voltage Fundamental positive sequence voltage 90% 55%

  7. Numerical simulation model • Model of laboratory set-up • PSCAD/EMTDC Simulation tool (Instantaneous value, time domain simulation tool) • Standard PSCAD induction machine model used (7th order model)

  8. Comparison (small dip, ride through succeeded) --- Measured --- Simulated Active power Voltage Fundamental positive sequence Reactive power Current

  9. Comparison (large dip, ride through failed) Active power Voltage --- Measured --- Simulated Fundamental positive sequence Reactive power Current

  10. Determination of ride-through limit • Reapplied large voltage dip with successively reduced torque setting until the generator was able to ride-through the voltage dip: • Very promising result for the use of simulations to assess fault ride through capabilities !

  11. Large dip, 86% torque (ride through succeeded) --- Measured --- Simulated Large dip, 87.5% torque (ride through failed) Voltage Voltage Fundamental positive sequence Current Current

  12. Conclusions • Simulations and laboratory measurements shows excellent agreement • Validated simulation models can accurately predict fault ride-through capability of direct grid connected induction generators • Test results from a standard test will be useful for model validation provided detailed data of both wind turbine and test equivalent are found in the test report. • More advanced wind turbines may be more challenging (doubly fed induction generator, power electronic converter control, fast pitch systems, fast acting digital protection systems) • Is it possible to get desired accuracy using simpler phasor type models ?? (e.g. PSSE)

More Related