slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
SRS Road/Rail Vehicle Type LRB 10-2T1 PowerPoint Presentation
Download Presentation
SRS Road/Rail Vehicle Type LRB 10-2T1

Loading in 2 Seconds...

play fullscreen
1 / 2

SRS Road/Rail Vehicle Type LRB 10-2T1 - PowerPoint PPT Presentation

  • Uploaded on

SRS Road/Rail Vehicle Type LRB 10-2T1.

I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
Download Presentation

PowerPoint Slideshow about 'SRS Road/Rail Vehicle Type LRB 10-2T1' - whitney-moss

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.

- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

SRS Road/Rail Vehicle

Type LRB 10-2T1

The vehicle is built on a standard Volvo FL 618 chassis, or similar. The LRB is specially designed for maintenance, repair and inspection of catenary systems. It is equipped with the patented SRS 17 tonne double axle bogie system, which allows the vehicle to travel on road as well as on track. With the system you can enter and leave the track at any railroad crossing within a few minutes and with no disturbance of the traffic on adjacent track.


Consists of a driving bogie at rear and guide/rail wheel axle in front. The forward rail wheels are mounted in front of the chassis’ regular front axle and the bogie is placed at the rear end of the chassis. The device is elastically suspended and shock absorbed by conical rubber cushions. Lowering and lifting of the rail travelling device is hydraulically operated. All rail wheel axles are equipped with hydraulic two-circuit disc brake systems. The rail wheels have a diameter of 440 mm. The braking distance from a speed of 70 km/h to stop in a gradient of 10‰ downwards is less than 200 m.


The hydraulic system consists in principle of two circuits: hydro-static transmission circuit for driving the rail wheel bogie on track and the manoeuvring circuit for the lift and lowering/lifting of the rail wheels. The hydrostatic transmission consists of a directly driven variable axial displacement pump, controlled by an electro-hydraulic servo, feeding the hydraulic motor in the bogie.Manoeuvring device for the lift and lowering/lifting of the rail wheels, consists of a fixed axial piston pump powered by the P.T.O. on the gear box of the chassis.


The LRB vehicle is also equipped with a special 2-boom telescopic lift for catenary works,designed to withstand strong horizontal forces, which could appear when pulling contact wires etc. The working platform can be exposed to a maximum horizontal force of 2000 N at an outreach of 4 m up to a height of 7.2 m over the top of the rail. Above 7.2 m the max allowed horizontal force is 1000 N. Total height from top of rail to cage botton is 10.2 m.



Chassis: Volvo FL 618Diesel engine: 152 kW (207 hp)Speed on road: 90 km/h

Speed on track: 70 km/h

Total length: 8.9 m

Width: 2.5 mTransport height (on track): 3.55 mTransport height (on road): 3.30 mRail wheel diameter:  440 mm

Lift: (standard version) Max height: 0.2 m (from top of the rail to bottom of platform)

Outreach: 5.4 (from the centre of track)Max load in platform: 350 kg or 3 personsPlatform dimensions: 1.1 x 2 m hydraulic rotation ±40°

Reachdiagram - top view

Reachdiagram - side view

P.O. Box 1031SE-171 21 SOLNAPhone: +46 - 8 - 799 67 00Fax: +46 - 9 - 28 43

P.O. Box 1512SE-271 00 YSTADPhone: +46 - 411 - 594 00Fax: +46 - 411 - 55 57 4/2000