1 / 14

Welding Flame Troubleshooting: Tips for Better Quality Welds

This guide covers oxy-fuel welding, brazing, soldering, and cutting flame types, troubleshooting techniques, and tips for maintaining optimal torch settings to improve weld quality. Learn about carburizing, neutral, and oxidizing flames, as well as cut quality factors like tip cleanliness, speed, and height.

virgiliob
Download Presentation

Welding Flame Troubleshooting: Tips for Better Quality Welds

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oxy Fuel Welding Troubleshooting

  2. Welding Flame Types Carburizing Flame Neutral Flame Oxidizing Flame

  3. Weld Quality Torch High Torch Low Torch Slow Torch Fast OK

  4. Welding Troubleshooting

  5. Brazing Flame Types Carburizing Flame Neutral Flame Oxidizing Flame

  6. Soldering Flame Types Low Pressure Flame Medium Pressure Flame High Pressure Flame

  7. Cutting Flame Types Carburizing Flame Neutral Flame Neutral Flame with Oxygen Cutting Stream Oxidizing Flame

  8. Cut Quality Good Cut Quality Poor Cut Quality

  9. Dirty Tip Dirty Tip

  10. Speed Extremely Slow Extremely Fast Slightly Too Fast Slightly Too Slow

  11. Tip Height Too High Too Low

  12. Other Too Much Cutting Oxygen Too Hot Pre-Heat

  13. AWS Cut Quality Quality Cut Extremely Fast Irregular Pressure Extremely Slow

  14. Troubleshooting

More Related