Types of 10 Gigabit Ethernet

1. VERSITRONINC Types of 10 Gigabit Ethernet 10GBASE -SR T IS A 10 GIGABIT ETHERNET THAT IS DEFINED BY IEEE 802.3AE STANDARDS. IN THIS TYPE, FIBER OPTIC CABLES ARE USED AS DATA TRANSMISSION MEDIA. THE TRANSMISSION DISTANCE SUITABLE FOR 10GBASE-SR IS UP TO 300 METERS. 10GBASE-LR THIS TYPE OF 10 GIGABIT ETHERNET, WHICH IS ALSO COVERED BY IEEE 802.3AE STANDARDS. THE TRANSMISSION MEDIA IS FIBER OPTIC CABLE WHEREAS IT IS SUITABLE FOR SINGLE-MODE TRANSMISSION DISTANCE UP TO 10KM AT A FREQUENCY OF 1.3Μ. 10GBASE-ER TTHIS TYPE OF GIGABIT ETHERNET IS ALSO DEFINED BY IEEE 802.3AE STANDARDS AND USES FIBER-OPTIC CABLE AS TRANSMISSION MEDIA. IT TRANSMITS DATA VIA A SINGLE-MODE TRANSMISSION PROTOCOL AT A FREQUENCY OF 1.5Μ. THE MAXIMUM DATA TRANSMISSION RATE HERE IS 40 KM. 10GBASE-CX4 THIS TYPE OF 10 GIGABIT ETHERNET IS INTRODUCED UNDER IEEE 802.3AK STANDARDS. THE TRANSMISSION MEDIA IN THIS TYPE IS TWIN AXIAL CABLES. THIS NETWORK MAY REQUIRE INTEGRATIONS LIKE GIGABIT MEDIA CONVERTERS. IT IS USED FOR SHORT-DISTANCE TRANSMISSION LIKE INTEROFFICE DATA TRANSMISSION AT MODERATE SPEED. 10GBASE-T THIS TYPE OF ETHERNET IS INTRODUCED UNDER IEEE 802.3AN STANDARDS. IT USES UNSHIELDED TWISTED PAIR CABLES. AS 4 PAIRS OF CABLES ARE USED HERE, TRANSMISSION CONNECTORS, NETWORK DATA AMPLIFIERS ARE REQUIRED IN THIS TYPE OF ETHERNET. IT OPERATES ON A LOW-DENSITY PARITY-CHECK CODE PROTOCOL TO TRANSMIT UP TO 100 METERS OF DISTANCE. SOURCE: WWW.VERSITRON.COM