1 / 43

Highly Contagious Diseases: ISOPOD Transport and Protection Guide

Learn the necessary precautions and procedures for transporting highly contagious patients using ISOPOD, a specialized isolation chamber. Includes step-by-step instructions and safety guidelines.

trautman
Download Presentation

Highly Contagious Diseases: ISOPOD Transport and Protection Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Highly Contagious DiseasesVersion 1 - 2/20/2018 Region I Specialized Transport Highly Contagious Disease The ISOPOD

  2. Definitions • Highly contagious disease – a disease that spreads rapidly from person to person • HOW it spreads may be known or unknown • Southern California Regional Highly Contagious Disease Treatment Centers: • UCLA Ronald Reagan Medical Center • Kaiser Medical Center Los Angeles • Cedars Sinai Medical Center (also FEMA Region IX Biocontainment Center) • Highly Contagious patient MIGHT need to be transported: • From home to hospital • Between hospitals • Airport to hospital

  3. All Transports will be Prearranged • Patients will ride in specific pre-designated ambulance vehicles • EMS care providers will wear full filtered air PPE • Patients may be transported in a Negative Pressure Individual Isolation System • The ISO-POD

  4. General Protective Equipment for YOU • Respiratory protection • Suit • Gloves • Durable foot covers

  5. Between You and the Patient • The Protection That You Will Be Provided With: Sentinel XL™ Clear Hood PAPR System NOTE: Use of this PPE is covered in a separate presentation

  6. How It Works • The ISO-POD is an isolation chamber for the patient • Room air is drawn into the pod • Exhaust air is filtered • Negative pressure maintained

  7. How It Works • Outside air is drawn in through HEPA filters • Air flows through the pod - over patient

  8. How It Works • Patient is ‘sealed’ in negative pressure environment • Outside air is drawn IN through HEPA filters . . .

  9. How It Works • Exhaust air (contaminated) is passed OUTSIDE through special filters • Located inside the pod • All contaminated air is kept near patient until filtered

  10. How It Works • All Exhaled air is passed through HE/OV/AG filters • High Efficiency • Organic Vapor • Acid Gas

  11. How It Works • Clean FILTERED AIR is exhausted at blower motor

  12. How It Seals • Blower motor draws huge quantity of air INTO and through the pod • Pressure inside pod is less than outside

  13. How It Seals • Blower motor draws huge quantity of air INTO the pod area • Inside air does not escape • Patient is not in a vacuum • Patient is NOT hermetically sealed

  14. How It Seals • Contaminated inside air does not escape • Closed service ports exist • O2? • IV?

  15. Placing Patient into ISO-POD • GOAL: Do not allow contaminates (body fluids) on outside of ISO-POD • Patient might be have significant drainage • Patient might be unable to assist with movement

  16. Placing Patient into ISO-POD Open zipper entire length

  17. Placing Patient into ISO-POD • Remove spine rods • Separate rib arches

  18. Placing Patient into ISO-POD • Roll/push down vinyl closest side to patient Note: HEAD end & FOOT end

  19. Placing Patient into ISO-POD • Roll down vinyl side closest to patient • Move (slide/lift) patient into ISO-POD

  20. Placing Patient into ISO-POD • Move (slide/lift) patient into ISO-POD

  21. Placing Patient into ISO-POD • Move (slide/lift) patient into ISO-POD

  22. Placing Patient into ISO-POD • Move (slide/lift) patient into ISO-POD

  23. Placing Patient into ISO-POD • Attach, place and secure RIBS and SPINE RODS

  24. Placing Patient into ISO-POD • Attach, place and secure patient care accessories • Oxygen, IV, catheter, ECG monitor wires, B/P cuff • Thread through service port

  25. Placing Patient into ISO-POD • Use of internal patient restraints (arm & chest) will require MD order and specific monitoring

  26. Placing Patient into ISO-POD • Turn on blower

  27. Placing Patient into ISO-POD • Close zipper

  28. Life INSIDE the ISO-POD • Patient is now ‘sealed’ inside a confined space . . . CANNOT OPEN ISOPOD FROM INSIDE– MUST ENSURE BLOWER OPERATION TO PREVENT INJURY OR DEATH • Patient is isolated from human contact . .

  29. Life INSIDE the ISO-POD • Patient movement is restricted . . . • Risk of claustrophobia and panic is high • Discuss use of anti anxiolytic medications with MD

  30. Life INSIDE the ISO-POD • ISO-POD does not heat or cool inside air • Radiant energy (sunlight) can heat interior space • Patient’s body heat (fever?) can increase interior temperature • Observe for signs & symptoms of warming • Sweating, warm skin, c/o feeling hot • Fogging inside of ISO-POD may indicate lack of air flow • Weak battery, inoperative filters, 3-way valve not set properly

  31. Life INSIDE the ISO-POD • ISO-POD blower battery must be fully charged. • ISO-POD blower battery can operate 6-8 hours on full charge. • ISO-POD blower battery can be plugged in to charging source during transport, but only if it was fully charged to begin. • I.E. using a partially charged ISO-POD blower battery, even if it is plugged in during transport may result in injury or death to patient.

  32. Treatment INSIDE the ISO-POD? • Only limited treatment is even possible • IV insertions are unlikely • Needles are dangerous • Use of BVM very difficult • CPR compressions are impossible • Expensive Equipment might need to be destroyed

  33. After The Transport • ISO-POD is designed to be reusable . . . • Will it be??? • Remove patient • Roll ISO-POD - Place in red bag

  34. ISO-POD Set Up • ISO-POD should remain set up and stored inside the pre-designated specialized ambulance

  35. ISO-POD Set Up • For comprehensive assembly instructions see the ISO-POD operator’s manual with every unit. This presentation does not cover hose/blower/valve assembly.

  36. ISO-POD Set Up • Unroll ISO-POD • Insert head board • Fits in short pocket

  37. ISO-POD Set Up • Insert (optional) backboard • Fits into longer pocket • Gives strength if ISO-POD is moved without gurney support

  38. ISO-POD Set Up • Attach pod to gurney • Straps found on bottom

  39. ISO-POD Set Up • Install inner and outer filters

  40. ISO-POD Set Up • Connect arched rib supports • Attach round spine supports

  41. ISO-POD Set Up • Connect hoses to pod and blower • Examine position of 3-way valve

  42. ISO-POD Set Up • Test blower for function

  43. ISO-POD Set Up • Zip pod closed until needed

More Related