1 / 13

Size Control Over Semiconducting Materials for Organic Electronics

Size Control Over Semiconducting Materials for Organic Electronics. Collen Leng 1 , Jeffrey M. Mativetsky 1 , John E. Anthony 2 , Yueh -Lin Loo 1 Chemical and Biological Engineering, Princeton University Chemistry, University of Kentucky. Why Organic Electronics?.

terrykelly
Download Presentation

Size Control Over Semiconducting Materials for Organic Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Size Control Over Semiconducting Materials for Organic Electronics CollenLeng1, Jeffrey M. Mativetsky1, John E. Anthony2, Yueh-Lin Loo1 Chemical and Biological Engineering, Princeton University Chemistry, University of Kentucky

  2. Why Organic Electronics? • Low cost solution processing • Mechanical flexibility • Lightweight http://images.sciencedaily.com/2008/02/080206154631-large.jpg http://ww1.prweb.com/prfiles/2009/10/04/167139/FlexibleOrganicElectronicsdisplay.jpg

  3. Increasing Efficiencies of Organic Solar Cells • Increase charge transport • molecular packing and orientation • Increase surface area between donor and acceptor materials

  4. Project Goal Make organic semiconducting nanowires • Size control of electron acceptors and donors • Increase interfacial surface area • Wire-like structures for efficient charge transport Method: templating using aluminum oxide membranes • Scanning electron micrographs of aluminum oxide membrane Top view of membrane Cross-section of membrane Cross-section (zoomed in) 300 μm 2 μm 2 μm

  5. Set-up • Allow solution to penetrate membrane from I-tube • Cap off I-tube to sustain internal pressure and prevent the solution from completely flowing through membrane rubber stopper closed air solution Electron donor: ethyl-TES-ADT I-tube membrane Teflon gasket Viton O-rings

  6. Nanowires Inside Porous Membrane Cross-sectional views 15 μm 15 μm 10 μm 2 μm

  7. Extracting Nanowires NaOH: dissolve membrane, free nanowires Options for removing NaOH and alumina: 1.Vacuum filtration 2. Centrifuge Nanowire mixture Viton O-rings Air out Polycarbonate filter Fritted glass

  8. Extracted Nanowires Bundles of ethyl-TES-ADT nanowires Close-up of ethyl-TES-ADT nanowires 1 μm 10 μm

  9. Nanowires on Glass High-density nanowires on glass: Close-up of wires: 30 μm 100 μm

  10. TEM & Electron Diffraction Occasional polycrystalline structures Bundle of ethyl-TES-ADT nanowires in a transmission electron microscope (TEM) Electron diffraction of nanowires to the left shows some polycrystallinity

  11. PCBM and P3HT Nanowires? Nanowires of other materials can be made. [6,6]phenyl-C61-butyric acid methyl ester (PCBM) nanowires: - the most commonly used electron acceptor 3 μm

  12. Future Plans • Structural studies: • Thinner nanowires (10 - 20 nm diameters) to better match exciton diffusion lengths • Crystallization to help electron transport • Structural characterization (Grazing Incidence X-ray Diffraction) • Photovoltaic studies: • Map photoexcited charge generation at donor-acceptor nanowire interfaces (Kelvin Probe Force Microscopy, Photoluminescence) • Nanowire-based solar cells

  13. Acknowledgements • Professor Loo • Jeff Mativetsky • Gerry Poirier • Loo Lab • PEI/Siebel Energy Grand Challenge

More Related