html5-img
1 / 11

Photometry: Aperture correction, Upper limit, and Standardization

Photometry: Aperture correction, Upper limit, and Standardization. ASTR 3010 Lecture 11 Textbook: 10.6 & 10.7. Aperture Correction. The need for an aperture correction arises due to the difference in aperture sizes of science targets (fainter) and of standard stars (very bright).

taryn
Download Presentation

Photometry: Aperture correction, Upper limit, and Standardization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Photometry:Aperture correction, Upper limit, and Standardization ASTR 3010 Lecture 11 Textbook: 10.6 & 10.7

  2. Aperture Correction The need for an aperture correction arises due to the difference in aperture sizes of science targets (fainter) and of standard stars (very bright). Total enclosed counts within an aperture radius

  3. Why different aperture size?? Signal Standard Stars (very bright) signal >> noise Signal / Noise

  4. Maximum S/N : faint science target Target Stars (faint) signal ≈ noise Signal Signal / Noise

  5. Aperture Photometry For optimal photometry, it is better to use a smaller aperture for the science targets and a larger aperture for the standard stars. PSF shape remains the same b/w target and standard star measurements. Aperture Correction Factor (r)= E(r)/E(∞), where E is an encircled energy.

  6. Aperture correction • aperture correction Inst. Flux of the Standard Star = Flux(rstd)*ap_correction(rstd) Inst. Flux of the Target Star = Flux(rtgt)*ap_correction(rtgt) If standard and target are measured at the same aperture, there is no need for the aperture correction. rstd rtgt True Flux of Target Star = Flux of Std. Star * (Inst. Flux of tgt / Inst. Flux of std.)

  7. Upper limit of an undetected source • In a digital image of your target, the object was not detected. The standard deviation of the image pixel values is p=3.56. What is the upper limit (3) for the brightness of your object? 0. The object was not detected because of the Poissonian noise from the sky Expected sky flux = p2 For the source aperture of N pixels, expected total signal from the sky = N* p2 Uncertainty of this value = sqrt(N* p2 )=sqrt(N)*p 3 sigma upper limit = 3*sqrt(N)*p

  8. What we measure (φarr) vs what we want to measure (φE). Extra Galactic Matter ISM

  9. Photometric Reduction • mAP : instrumental magnitude measured inside the atmosphere • mP : instrumental magnitude measured outside the atmosphere Steps: • Preprocess images • Digital photometry (aperture or PSF) mAP • Compute the instrumental mag outside the atmosphere  mP • Transform instrumental magnitudes to a standard system mPSTD • Derive astrophysical and astronomical corrections • Corrections for absorptions: Aism, Aexg • Correction for wavelength shift: CPZ • Extract astrophysical parameters (temp, metallicity, age, distance, etc.)

  10. Term Project Part I: Imaging Data • Imaging data can be copied from /home/astr3010/ImagingData at your home directory.. cp ../ImagingData/* . • Start the pre-processing of these CCD data. • Check “TermProject_photometry.pptx from the “lecture notes” page

  11. In summary… Important Concepts Important Terms Aperture Correction • Aperture correction • Upper limit calculation • Chapter/sections covered in this lecture : Not in the textbook

More Related