1 / 10

REBECA WP IV: Effect of Biodiesel on Diesel Particulate Filter Performance

REBECA WP IV: Effect of Biodiesel on Diesel Particulate Filter Performance. Brian B. Hansen; Peter A. Jensen & Anker Jensen CHEC Annual day, DTU, October 5th, 2010. REBECA. R enewable E nergy in the transport sector using B iofuels as E nergy Ca rriers REBECA objectives

tamber
Download Presentation

REBECA WP IV: Effect of Biodiesel on Diesel Particulate Filter Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. REBECA WP IV:Effect of Biodiesel on Diesel Particulate Filter Performance Brian B. Hansen; Peter A. Jensen & Anker Jensen CHEC Annual day, DTU, October 5th, 2010

  2. REBECA • Renewable Energy in the transport sector using • Biofuels as Energy Carriers • REBECA objectives • - Multi-disciplinary impact assessment of biofuel introduction in Denmark • - Emissions, air quality changes, health aspects & resource and land usage • WP IV: Formation and transportation of particles and other pollutants from engines using biofuel • - From combustion to transformation and filtration in exhaust • Motivations: • - Biodiesel introduction: A renewable resource & decreased emissions • - Diesel Particulate Filters introduction: Decreased street level PM emissions • - Potential interaction of biodiesel and Diesel Particulate Filters ? page 1

  3. Diesel particulate filters • Up to a 95 % reduction in PM emissions • - Reduce accumulation mode particles (100-1000 nm) • Filter Regeneration • - Non-catalytic - Exhaust heating ~ 500-600 oC • - Catalytic filter surface (Ce, Pt) ~ 300-400 oC • Biodiesel-filter interaction (limited knowledge) • - Lower break-even temperature (~ 50 oC with B20) • Mechanisms suggested: • - higher NO2 • - lower CPM • - higher PM reactivity • - Potential long time interactions with the catalyst • Changed ash composition (Na, K, P) page 2

  4. DTU Project objectives • Aims • To quantify and understand the difference in catalytic particle filter • behavior when using bio-diesel and fossil diesel • - Mechanism behind decreased break even filter temperature: • - Long-term influence on filter: Deactivation/activation by Na, K, P ? • Activities • Literature survey • Provision of filter test facility • Filter experiments with test facility • Fundamental catalytic oxidation experiments (STA) page 3

  5. Simultaneous thermal analysis 1/3 page 4 • Netzsh STA 449 - Weight and DSC as function of T - Controlled gas composition - Determination exo-/endo-thermic reactions • Samples - Soot: SRM 2975 & samples - Catalyst: Commercial catalyst CeO2 & TiO2 - Biodiesel salts: K3PO4, K2CO3, K2SO4, Na3PO4, Na2CO3 & Na2SO4 • Investigations - Soot reactivity - Effect of NO2 - Catalyst activation/deactivation

  6. Simultaneous thermal analysis 2/3 Mass dm/dt page 5 • Exp. Procedure - Catalyst & salt mixed with water - Mixed with soot in mortar - Add a few drops of ethanol • Exp. Conditions - 10 K/min in 10 % O2 - Soot/Catalyst/Ion: 1:5:2.5 (mass) - Ignition = Decrease in mass

  7. Simultaneous thermal analysis 3/3 page 6 • Selected ignition results - Soot (SRM 2975) = 510 ±4 oC - Soot & Commercial catalyst = 402 ±4 oC - Soot & CeO2 = 326 oC - Soot & TiO2 = 502 ±3 oC - Soot & Commercial catalyst = 402 ±4 oC - Soot, Commercial catalyst & Na2CO3 = 337 oC - Soot, Commercial catalyst & Na2SO4 = 421 oC - Soot, Commercial catalyst & K2CO3 = 319 oC - Soot, Commercial catalyst & K2SO4 = 441 ±10 oC • Distinct effect of commercial catalyst - Active compound is CeO2 • Alkali can improve the soot oxidation if not bound as SO42-

  8. Experimental setup – Engine and filter page 7 • Operation conditions - Engine load and fuel - Exhaust temperature - Filter regeneration temperature • Diagnostics - Filter efficiency & pressure drop - Gas: HC, NO, NO2, CO, CO2 & SO2 - PM: Scanning mobility particle sizer - PM: Filter collection - PM: Reactivity & characterization (STA)

  9. Conclusions & future work page 8 STA Conclusions • Distinct effect of commercial catalyst (CeO2) • Biodiesel alkali can improve the soot oxidation • SO42- cancels alkali effect Activities 2010-2011 • Experimental studies on engine + filter - Emissions & filter performance • Experimental studies STA - Influence of catalysts, deactivation, PM reactivity & NO2 - Modeling of reaction kinetics

  10. Thanks for the Attention Further contact:Brian Brun Hansen, bbh@kt.dtu.dk

More Related