1 / 1

Brownian Dynamics Simulation of Blood: Modeling Red Blood Cells with a Bead-and-Spring Models

Brownian Dynamics Simulation of Blood: Modeling Red Blood Cells with a Bead-and-Spring Models. Investigators: L.E. Wedgewood; Kyung- Hyo Kim, UIC Chemical Engineering. Understanding blood rheology (i.e., blood flow properties) is important for the treatment of occlusive vascular disease.

taji
Download Presentation

Brownian Dynamics Simulation of Blood: Modeling Red Blood Cells with a Bead-and-Spring Models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Brownian Dynamics Simulation of Blood: Modeling Red Blood Cells with a Bead-and-Spring Models Investigators: L.E. Wedgewood; Kyung-Hyo Kim, UIC Chemical Engineering • Understanding blood rheology (i.e., blood flow properties) is important for the treatment of occlusive vascular disease. • Viscoelastic behavior of red blood cells affect flow behavior and transport in blood vesicles. • A red blood cell is a biconcave disk with length of ~8.5um [Fig 1] and accounts for roughly 38% - 46% of blood’s volume. • Fahraeus-Lindqvist effect: The decrease in apparent viscosity when blood vessel has small diameter less than about 0.3 mm [Fig 2]. • To develop a Brownian dynamics (BD) model that captures the essential rheological behavior of blood [Fig 3]. Fig 1 Dimension of normal human RBC with standard deviations Fig 3 Simulation model of RBC Fig 2 RBC in a blood vessel • Construct a model for red blood cells suspended in blood plasma Fig. 3: • Bead-and-Spring Model: flexibility and elasticity of a red blood cell is represented by a network of springs to mimic cell membrane. • Intrinsic curvature of the membrane is modeled by bending potentials. • Membrane area and cell volume are constrained to be constant in accordance with actual cells. • Complex flow calculations are made using Brownian dynamics simulations. Motion and configuration of red blood cells can be simulated in complex flow geometries. • Results for a three bead-and-spring model gives a simplified view of the physical system, but captures the essential physical characteristics of red blood cells: • Correctly predicts the steady shearing properties giving the correct relation between shear stress and shear rate. • Correctly predicts the Fahraeus-Lindqvist effect for circular tubes of various radii. • Future goals: • Addition of details to the red blood cell model: internal viscosity of cell, bending potentials and interaction between cells. • The method can be extended to more complex situations by replacing the single vessel for more complex geometries (walls, constriction, bends, junction, networks) or combinations.

More Related