1 / 4

IBL Mock Up

IBL Mock Up. Francois-Xavier NUIRY Andrea Catinaccio PH/DT/PO 2011/01/20. Objectives. Integration of different parts (2011) Collect / Manufacture all parts (BP, rings, staves, IST, sensors...) Give a feedback on different assemblies Thermal analysis (Spring 2011)

tait
Download Presentation

IBL Mock Up

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IBL Mock Up Francois-Xavier NUIRY Andrea Catinaccio PH/DT/PO 2011/01/20

  2. Objectives • Integration of different parts (2011) • Collect / Manufacture all parts (BP, rings, staves, IST, sensors...) • Give a feedback on different assemblies • Thermal analysis (Spring 2011) • Designing all the test bench with people from cooling (already in work) • Following R.Vuillermet boundary conditions to get information about three load cases: (start on March) Bake out, Running nominal, Accidental. • Lamination Flex / Stave (End : beginning of May) • Thinking about the interface Flex / Omega

  3. Few information about thermal test bench 4000mm Support rings IST Support Plexiglas pipe 266mm diameter Cooled pipes with thermostatique bath B-layer cylinder 91mm diameter Heaters Painted surface N2 controlled flow IST IBL Beam pipe 800mm 1000mm 1000mm Manifold

  4. Test Bench Kinematics (in work) BP 3m IBL 800 mm IST 2.2m B-layer + discs + services 2.5m Plexiglas Pipe 4m

More Related