1 / 8

Introduction to Sampling(SQC)

Introduction to Sampling(SQC). What is sampling? What is an acceptance sampling plan? Attribute Type and Variable type sampling plans?. Introduction to Sampling:Mathematical Review. Binomial distribution:.

stormy
Download Presentation

Introduction to Sampling(SQC)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to Sampling(SQC) • What is sampling? • What is an acceptance sampling plan? • Attribute Type and Variable type sampling plans?

  2. Introduction to Sampling:Mathematical Review Binomial distribution: If 4 samples are chosen from a population with a defect rate = .1, what is the probability that exactly 1 out of 4 is defective? At most 1 out of 4 is defective? More than 1 is defective? P(x) = n choose x =

  3. Probability Distributions • Poisson:  = np • Poisson approximation to the binomial: can apply if n large and p small. • “Poisson is our friend” • If we sample 50 items from a large lot, what is the probability that 2 are defective if the defect rate (p) = .02? What is the probability that no more than 3 defects are found out of the 50?

  4. Probability Distributions (2) Hypergeometric Distribution: • This distribution is used when sampling from a small population. It is used when the lot size is not significantly greater than the sample size. (Can’t assume each part is independent). • A lot of 20 tires contains 5 nonconforming ones. If an inspector randomly samples 4 items, what is the probability of 3 nonconforming ones?

  5. N n Number Conforming Accept or Reject Lot Design of Lot-by Lot Sampling Plans Specify the plan (n,c) given N: for a lot size N, determine the sample size n, and the acceptance number c. (Reject lot if number of defects > c.) Specify course of action if lot is rejected.

  6. Definitions: • Type I error—The probability that something good is mistakenly judged as defective. • Type II error—The probability that a defective item or nonconforming lot is accepting as being “good” or nondefective. • Producer’s Risk—Risk of rejecting a “good lot.” This is a Type I error. • Consumer’s Risk—Risk of accepting a “poor lot.” This is a Type II error.

  7. Definitions AQL (Acceptable Quality Level) -- the maximum percentage of nonconforming items in a batch that can be considered acceptable. • LQL (Limiting Quality Level) – percentage of nonconforming items in a lot for which the consumer wishes the probability of acceptance is a specified low value. Also know as “unacceptable quality level.”

  8. Example: Lots of size N = 1000 fuses are inspected using an (50,3) sampling acceptance plan. Usually, the defect rate is 3% but occasionally there is a bad batch that has a 6% defect rate. • What is the producer’s risk of this sampling plan? • What is the consumer’s risk of this sampling plan? • What if the plan was changed to (50,2)? What would the relative change be between the consumer’s and producer’s risk?

More Related