1 / 27

POINT, DIVIDE, and MEASURE Commands for Drawing and Measuring Objects

Learn how to use the POINT, DIVIDE, and MEASURE commands in Sacramento City College's Engineering Design Technology program to draw and measure objects with precision. Control the appearance of points and divide objects into equal segments for accurate measurements.

stops
Download Presentation

POINT, DIVIDE, and MEASURE Commands for Drawing and Measuring Objects

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The POINT Command andThe DIVIDE, MEASURE Commands Sacramento City College Engineering Design Technology The POINT, DIVIDE, and MEASURE Commands

  2. The POINT Command The POINT, DIVIDE, and MEASURE Commands

  3. Drawing Points • CIRCLE command – draws circles • LINE command – draws lines • POINT command – draws points • Select POINT command by: • Draw Toolbar - Point button • Draw pull-down menu – Point suboption • PO or POINT at the Command: prompt The POINT, DIVIDE, and MEASURE Commands

  4. Drawing Points • Command: PO or POINT • Point: (type point coordinates or pick with pointing device) • POINTS can be • Moved • Copied • Rotated • Just like lines, polygons or other objects. The POINT, DIVIDE, and MEASURE Commands

  5. The POINT, DIVIDE, and MEASURE Commands

  6. Controlling Appearance of POINT Objects - The PDMODE System Variable The POINT, DIVIDE, and MEASURE Commands

  7. PDMODE System Variable • The PDMODEsystemvariable controls the appearance of POINTs. • 20 different POINT appearance options exist. • Value of PDMODE range only from • 0 to 4. • 32 to 36 • 64 to 68 • 96 to 100 The POINT, DIVIDE, and MEASURE Commands

  8. PDMODE System Variable • The PDMODEsystemvariable controls the appearance of POINTs. • 0 = point. • 1 = nothing drawn. • 2 = cross is drawn. • 3 = x is drawn. • 4 = | is drawn. • 32 = circle • 64 = square The POINT, DIVIDE, and MEASURE Commands

  9. PDMODE = 2 The POINT, DIVIDE, and MEASURE Commands

  10. PDMODE = 3 The POINT, DIVIDE, and MEASURE Commands

  11. PDMODE = 4 The POINT, DIVIDE, and MEASURE Commands

  12. Setting Point Style • To change the appearance of POINTs, change the value of the PDMODE system variable. • Two ways to change PDMODE value. • 1. Type PDMODE at the Command: prompt • Enter the new value of PDMODE system variable. • 2. Type DDPTYPE at the Command: prompt. • Dialog box appears allowing you to change value of PDMODE. The POINT, DIVIDE, and MEASURE Commands

  13. A combination of square and circle can be produced. Circle Square Both 32 + 0 = 32 64 + 0 = 64 96+ 0 =96 32 + 1 = 33 64 + 1 = 65 96+ 1 =97 32 + 2 = 34 64 + 2 = 66 96+ 2 =98 32 + 3 = 35 64 + 3 = 67 96+ 3 =99 32 + 4 = 36 64 + 4 = 68 96+ 4 =100 Setting Point Style The POINT, DIVIDE, and MEASURE Commands

  14. Setting Point Style • DDPTYPE dialog box: 0, 1, 2, 3, 4 32 = circle 32, 33, 34, 35, 36 64 = square 64, 65, 66, 67, 68 96 = circle + square 96, 97, 98, 99, 100 No other values are valid for PDMODE except these values The POINT, DIVIDE, and MEASURE Commands

  15. The DIVIDE Command The POINT, DIVIDE, and MEASURE Commands

  16. Dividing an Object • The DIVIDE command “divides objects” into an equal number of segments, by placing POINTs or BLOCKs along the object. • It places point objects or blocks at the locations where the breaks would occur. • The DIVIDE command does NOT physically break an object into multiple parts. The POINT, DIVIDE, and MEASURE Commands

  17. Dividing an Object • Command: DIVIDE or DIV • Selecting DIVIDE from the Point cascading menu of the Draw pull-down menu The POINT, DIVIDE, and MEASURE Commands

  18. Dividing an Object • Command: DIV or DIVIDE • Select object to divide: (pick the object) • <Number of segments>/Block: (enter the number of divisions and press [Enter] The POINT, DIVIDE, and MEASURE Commands

  19. Dividing an Object • The Block option of the DIVIDE command allows you to place a block at each division point. • A Block is a previously drawn symbol or shape. • We will learn blocks later in the course. The POINT, DIVIDE, and MEASURE Commands

  20. The POINT, DIVIDE, and MEASURE Commands

  21. The MEASURE Command The POINT, DIVIDE, and MEASURE Commands

  22. Measuring Objects at Specific Points • The MEASURE command • “measures objects” by placing POINTs or BLOCKs along the object, at a user-specified distance apart. • The MEASURE command does NOT physically break an object into multiple parts. The POINT, DIVIDE, and MEASURE Commands

  23. Measuring Objects at Specific Points • Select by: • Picking Measure from the Point cascading submenu of the Draw pull-down menu • Typing ME or MEASURE at the Command: prompt The POINT, DIVIDE, and MEASURE Commands

  24. Measuring Objects at Specific Points • Command:ME or MEASURE • Select object to measure: (pick an object) • <Segment length>/Block: The POINT, DIVIDE, and MEASURE Commands

  25. The POINT, DIVIDE, and MEASURE Commands

  26. The Block Option • The Block option of the MEASURE and DIVIDE commands allows you to place a block at each division point. The POINT, DIVIDE, and MEASURE Commands

  27. The POINT, DIVIDE, and MEASURE Commands

More Related