1 / 4

Steps for preparing report data

Steps for preparing report data. Primary data process through Workstation Identify & connect trajectories, fill the small gaps (<20 frames) 2. Advanced data process through BodyBuilder Fill all gaps, smooth all trajectories 3. Model Calculation (Golem model).

stanislaw-aurek
Download Presentation

Steps for preparing report data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steps for preparing report data • Primary data process through Workstation • Identify & connect trajectories, fill the small gaps (<20 frames) • 2. Advanced data process through BodyBuilder • Fill all gaps, smooth all trajectories • 3. Model Calculation (Golem model)

  2. Summary of the steps for the calculation of biomechanical parameters using GOLEM model • Copy model parameter (*.mp), model (*.mod) and marker (*.mkr) files into your folder. It is recommended that Golem.mp file should at least be renamed by using subject name. • Open a static trial in BodyBuilder. • Go to Model->Subject Settings. Connect the three files (*.mp, *.mod, *.mkr) to the static trial. • Check the "Static" tick box in the upper right hand corner.

  3. Summary of the steps for the calculation of biomechanical parameters using GOLEM model • Go to Model->View Parameters. Enter subject anthropometrical parameters such as leg length, etc. • Go to Model->Run Model. You should see some extra trajectories appear in the space. • Save the *.mp file (it is not necessary to save the *.c3d but you can). You will be prompted for each when you try to close the window. • Open the dynamic trial.

  4. Summary of the steps for the calculation of biomechanical parameters using GOLEM model • Go to Model->Subject settings. Verify the correct files are still selected. • Make sure that the "Static" box is not ticked. • Go to Model->Run Model. Trajectories will appear. • Save and take to Polygon for making an electrical report.

More Related