1 / 7

Mobility in a Dual Stack Internet draft-ietf-mip6-dmip-problem

Mobility in a Dual Stack Internet draft-ietf-mip6-dmip-problem. G.Tsirtsis, H.Soliman @flarion.com. The problem. MIPv4 allows IPv4 node to move in IPv4 networks MIPv6 allows IPv6 node to move in IPv6 networks Internet is a mixture of IPv4, IPv6 and Dual Stack networks

solana
Download Presentation

Mobility in a Dual Stack Internet draft-ietf-mip6-dmip-problem

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mobility in a Dual Stack Internet draft-ietf-mip6-dmip-problem G.Tsirtsis, H.Soliman @flarion.com

  2. The problem • MIPv4 allows IPv4 node to move in IPv4 networks • MIPv6 allows IPv6 node to move in IPv6 networks • Internet is a mixture of IPv4, IPv6 and Dual Stack networks • Use of MIPv4 and MIPv6 simultaneously adds signalling overheads and does not allow MNs to be reachable on both IPv6 and IPv4 HoAs all the time.

  3. Problem • MN supports both MIPv4 and MIPv6 • A lot of overheads • Erratic connectivity • Optimized Mobility Management near-impossible IPv4 MIPv6 MIPv4 HAv4 IPv4/v6 MIPv4 Internet MIPv6 HAv6 MIPv6 MIPv4 IPv6

  4. Solution Strategy • Use MIP as migration tool • Use the tunneling capability of Mobile IP to forward both IPv4 and IPv6 traffic over the same Mobile IP created tunnel. • MIPv4 • Allow IPv4 and IPv6 HoAs to bind to an IPv4 CoA • MIPv6 • Allow IPv4 and IPv6 HoAs to bind to an IPv4 or IPv6 CoA (We can’t guarantee that IPv6 CoA is always available) • MNs can use either MIPv4 only or MIPv6 only

  5. MIPv6 Solution framework • NAT detection and traversal • No NAT implies IP in IP tunnelling of IPv4 in IPv6 or Vice Versa, depending on the access network. • Presence of NAT implies UDP tunnelling. • Two main components of solution: • NAT detection and traversal • Flexible Tunnel setup to allow IPv4 in IPv6 or IPv6 in IPv4.

  6. Mobility Binding HoAv4 HoAv6 CoAv6 Creating Bindings in MIPv6 IPv4 traffic CNv4->HoAv4 BU(HoAv4, HoAv6, CoAv6) IPv6 Tunnel HAv6->CoAv6 Dual Stack HA Dual Stack MN DS-MIPv6 IPv6 traffic CNv6->HoAv6

  7. Next steps for draft • Add new terminology: • IPv4/6 capable/enabled • MIPv6/MIPv6 enabled • Call for WG last call.

More Related