What To Do If The Washer Door Won't Latch Properly

1. What To Do If The Washer Door Won't Latch Properly? Each part of the washer is important, and whenever it is not functioning well, this can cause the washer not to work well. There are different Kenmore washer models that you can choose from, such as the Top-load Washers, which provide convenience in loading the laundry to the washer. Like any household appliance, it can also be prone to breakdown. There are times that you wouldn't realize what pressure a regular washer lock experiences. It tends to suffer high pressure, and if it is used frequently, it needs constant clicking. When the time comes, your washer door won't close properly. Even the appliance itself is working. Not to worry, a Kenmore Appliance Repair in San Jose will be able to help you with Whirlpool Washer repair to ensure that all possible reasons for the problem are fixed properly and correctly.

2. There are different possible reasons why the washer won't close properly. Usually, you should be able to hear a click when it needs to be closed. If the washer door doesn't close, the appliance won't start. Some of the possible reasons why the washer door won't close are the following: ● ● ● The washer door gets skewed over time. Shifting of the hatch latch inside its lock mechanism Wearing-off of the plastic or rubber seal component Usually, it is easy to determine the cause of the problem. For example, if the door won't close without any laundry in it, the hatch latch is likely broken or appears to be skewed. Some instances that the washer installed on the surface is not flat. This can cause the skew of the glass hatch due to gravity and shaking. Similarly, the washer's lock may be damaged. Door Lock Motor and Switch Assembly The door lock secures the washer door during the cycle. Once the washer's door is closed, it will start to operate. If the door lock is defective, the washer door will tend not to latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock damage. If it is damaged or doesn't latch properly, it needs to be replaced. You can test if it failed electrically by using a multimeter to check its continuity. If one of the switches doesn't have continuity, replace the switch. Door Latch The door latch assembly might be defective. Check the door latch for any damage and if it is, replace it. Door Lock The door lock assembly may also be defective. Check the door lock for any damages, and if it is, replace it. Door Strike Inspect the door strike assembly for any damages. If the door strike of the washer is broken, replace it. The door strike is not repairable, and replaced. this must be

3. Main Control Board The main control board can also be defective. However, this rarely happens. Before replacing the main control board of the washer, check all of the components of the lock mechanism. If none of the parts are defective, consider replacing the main control board. If the washer won't latch properly, there is often something that causes the appliance not to close. If the blocking doesn't happen, its mechanism can be broken. The machine won't start washing, knowing that it is not locked. It needs to be replaced to get rid of the hatch latch issue. Electric current passes through it, and this is how you must verify connection reliability and protection against accidental opening. Other malfunctions can be removed using the following tips: ● Adjust the position of the glass hatch with the use of a special bolt clasp to prevent possible skews. ● Remove and disassemble the door to adjust the steel pin of the locking shoe. ● Replace the door handle if the hook is damaged. ● Clean or replace the hatch latch if the washer won't start the cycle. Before doing any repairs, check first the washer's general condition. If the lock, handle, or the door itself doesn't have any visible damage, it is time to proceed to the next step. Usually, the damage can be in the control module or the hatch latch. If this happens, consider calling a professional repair technician to handle the repair needed with the help of the special tools designed to repair the Kenmore washer. Call Kenmore Appliance Repair today to schedule an appointment for repair and have your washer working in no time. Having a working Kenmore washer is a big advantage, especially if you need to wash a big pile of laundry. But, when the washer's door is not working, this will cause the appliance not to work. When this happens, call Kenmore Appliance Repair to immediately fix the problem.