1 / 19

IS605/606: Information Systems Instructor: Dr. Boris Jukic

IS605/606: Information Systems Instructor: Dr. Boris Jukic. Voice Telephony: Technology and Industry Overview. Telecommunication Industry: Carriers. LATA. Carriers In the United States U.S. is divided into regions called local access and transport areas (LATAs) About 200 LATAs nationwide.

santos
Download Presentation

IS605/606: Information Systems Instructor: Dr. Boris Jukic

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IS605/606: Information SystemsInstructor: Dr. Boris Jukic Voice Telephony: Technology and Industry Overview

  2. Telecommunication Industry: Carriers LATA • Carriers • In the United States • U.S. is divided into regions called local access and transport areas (LATAs) • About 200 LATAs nationwide

  3. LEC ILEC CLEC Intra-LATA (Local/Toll) LATA • Carriers • In the United States post 1996 • Local exchange carriers (LECs) provide service within a LATA • Incumbent LEC (ILEC) is the traditional monopoly carrier in the LATA • Competitive LEC (CLEC) is a new competitor

  4. Inter-LATA (Long Distance) • Carriers • In the United States • Inter-exchange carriers (IXCs) provide service between LATAs • LEC versus IXC distinction is used by data carriers as well as voice carriers. IXC LATA LATA

  5. POPs • In the United States • Point of Presence (POP) is a place in a LATA where all carriers interconnect to provide integrated service to all customers IXCs carry traffic to POPs in other LATAs LATA POP ILEC IXC CLEC IXC

  6. Regulation of Land-Line Telephony • Regulation • Why regulation? Two Main Reasons: • An industry that supplies essential services where only one organization can operate efficiently in a given market is a "natural monopoly.“ • Basic telephone service is considered a public utility whose efficient operation is in the public interest • the monopolistic aspect of the basic telephone service industry is debatable • First steps to regulation were taken by the states in the early 1900s; now all 50 states plus D.C. have commissions that regulate intrastate telecommunications. • State regulatory agencies are generally known as public utility commissions or public service commissions. • The Federal Communications Commission (FCC) was created by the Communications Act of 1934. Independent agency charged with regulating interstate and international communications originating in the United States

  7. Regulation of Land-Line Telephony • Common Carriers: carry signals between customer premises • Domestic Telephone Service provided by a single telephone carrier within many countries: PTT – Public Telephone and Telegraph Authority • Rights of Way: government permission to lay wire along roads, rails and in other public areas • Tariffs are the published rates, regulations, and descriptions governing the provision of communication services.

  8. Regulation and Carriers • International Service (Between Pairs of Countries) • Provided by international common carriers (ICCs) • Allowed carriers, prices, and conditions of service are settled through bilateral negotiation between each pair of countries Country 1 Country 2 ICC

  9. Basic Telephony Infrastructure: Public Switched Telephone Network (PSTN)

  10. PSTN: Local Loop CO “The Local Loop or Last Mile” CO CO Terminating Equipment “NID” Reg. De-Reg. CO UTP, Coax, & Fiber are run into neighborhoods to serve businesses and homes Thousands of Central Offices (COs) that house telecom equipment. Some serve as “end offices” and some just as tandem offices. COs are connected using high-speed, redundant circuits (e.g., ATM over OC-48)

  11. PSTN: Digital Trunks and Mostly Analog Local Loops Circuit: End-to-End Connection Between Two Subscribers. Switches: Voice switches are Circuit-Switched. Local Loop (Analog) Local Loop (Digital) Switch (Digital) Residential Telephone (Analog) PBX (Digital) Trunk Line (Digital) Switch (Digital) Switch (Digital)

  12. Analog-to-Digital Conversion (ADC) • Sampling of the Voice Signal • Each second is divided into 8,000 sampling periods (Nyquist’s Law) • Each sampling period is 1/8,000 of a second • Voice intensity in each sampling period is recorded as fraction of a maximum value (255). • The decimal value (210 in this example) is converted into an 8-bit binary value, 11010010 Intensity Value 210/255 (1010010) Sample 1/8,000 sec Sampling Period

  13. Transmission Rates • Transmission Rate for a telephone line • 8,000 samples/second * 8 bits/sample = 64 kbps • This is why telephone channels are 64 kbps

  14. Mobile (Cellular) Telephony: Analog vs. Digital • Analog: broadcasts audio as a series of continuously changing, voltage levels representing the amplitude of the voice conversation. • Each call is sent through a channel separated by 30 kHz: Frequency Division Multiple Access (FDMA) • Digital: quantizes the voltage levels into a number of bins (typically 28 or 256 representing 8-bit encoding). • bins are encoded as a binary number and sent as a series of ones and zeros. • Multiple conversations are possible over the same channel

  15. Mobile (Cellular) Telephony: Digital Advantage • It economizes on bandwidth. • More digitized conversations per frequency band • Superior quality of voice transmission over long distances. • More difficult to decode. • It can use lower average transmitter power. • It enables smaller and less expensive individual receivers and transmitters. • It offers voice privacy.

  16. Desirable Frequency Band for Wireless Providers: “Golden Zone” • At lower frequencies, there is little total bandwidth. • At very high frequencies, propagation is poor. • Mobile devices tend to work in the “golden zone” from the high megahertz to the low gigahertz range. • Frequencies in the golden zone are limited and in high demand. • Very expensive to obtain • EU wide auctions for 3G spectrum yielded > $100 Billion

  17. Generations of Cellular Service Generation First 2nd 2.5G 3G Technology Analog Digital Digital Digital Data Transfer Rate Data Transfer Is Difficult 10 kbps* 20 kbps to 144 kbps 144 kbps to 2 Mbps World Standardization (and therefore roaming) Poor Good (GSM) Based on 2G (W-CDMA, CDMA-2000, and other systems may compete) U.S. Standardization Good (AMPS) Poor (GSM, CDMA, TDMA, & CDPD) Based on 2G ? *Sufficient for Short Message Service (SMS) and wireless Web access using the Wireless Access Protocol (WAP)

  18. 3G Speeds (Throughput Rates) • ITU Speed Requirements for 3G • 2 Mbps for fixed devices • 384 kbps for walking people • 144 kbps for automotive users • Anything Less is 2.5 G • Some 2.5G vendors call themselves 3G but are not

  19. U.S. Cellular Telephony Usage Lag • The U.S. lags many other countries in cellular telephone use. • Europe and Asia-Pacific have higher rates of usage • The rest of the world also has very high usage rates when adjusted for per-capita income • U.S. wired telephone charges are low, and in the case of local loop not based on usage • intensive usage of mobile telephony for local loop purposes is less attractive • The lack of a dominant U.S. standard for 2nd generation cellular telephony • Pricing schemes in U.S. discourages intensive use (receiver-based charging) • Recently, per-unit of usage prices have dropped significantly • 3G deployment may change the perception of the “Lag” (stay tuned)

More Related