1 / 16

SOC Final Project

SOC Final Project. 第四組 R91921042 蘇倉弘 R91921054 莊銘罡 R90921003 陳健志. SOC Final Project. AHBDecoder 更改部份 : assign iHSELMYIP = ((iHSELLOGICMODULE == 1'b1) & (HADDR[27:7] == 21'b110000000000000000000)) ? 1'b1 : 1'b0; 更改成

rudolphp
Download Presentation

SOC Final Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOC Final Project 第四組 R91921042 蘇倉弘 R91921054 莊銘罡 R90921003 陳健志

  2. SOC Final Project AHBDecoder更改部份: • assign iHSELMYIP = ((iHSELLOGICMODULE == 1'b1) & (HADDR[27:7] == 21'b110000000000000000000)) ? 1'b1 : 1'b0; 更改成 • assign iHSELMYIP = ((iHSELLOGICMODULE == 1'b1) & (HADDR[27:8] == 20'b11000000000000000000)) ? 1'b1 : 1'b0; LM_MYIP registers address range : 0xCC000000~0xCC0000FF

  3. SOC Final Project • assign iHSELDefault = ((iHSELLOGICMODULE == 1'b1) & • ~(HADDR[27:25] == 3'b000) & • ~(HADDR[27:20] == 8'b00100000)& • ~(HADDR[27:7] == 21'b110000000000000000000)) ? 1'b1 : 1'b0; 更改成 • assign iHSELDefault = ((iHSELLOGICMODULE == 1'b1) & • ~(HADDR[27:25] == 3'b000) & • ~(HADDR[27:20] == 8'b00100000)& • ~(HADDR[27:8] == 20'b11000000000000000000)) ? 1'b1 : 1'b0;

  4. myIP部分更改部份 `ST_READ : if (Valid == 1'b1)begin case(HADDR[6:0]) 7'b0100000: i_out<=out0; 7'b0100100: i_out<=out1; 7'b0101000: i_out<=out2; 7'b0101100: i_out<=out3; 7'b0110000: i_out<=out4; 7'b0110100: i_out<=out5; 7'b0111000: i_out<=out6; 7'b0111100: i_out<=out7; 7'b1000100: i_out<=rr; endcase 更改成 `ST_READ : if (Valid == 1'b1)begin case(HADDR[7:0]) 8'b10000000: i_out<=out0; (0xCC000080) 8'b10000100: i_out<=out1; (0xCC000084) 8'b10001000: i_out<=out2; (0xCC000088) 8'b10001100: i_out<=out3; (0xCC00008C) 8'b10010000: i_out<=out4; (0xCC000090) 8'b10010100: i_out<=out5; (0xCC000094) 8'b10011000: i_out<=out6; (0xCC000098) 8'b10011100: i_out<=out7; (0xCC00009C) 8'b10100000: i_out<=rr; (0xCC0000A0) endcase SOC Final Project

  5. 原始程式 `ST_WRITE : if (Valid == 1'b1)begin case(HADDR[6:0]) 7'b0000000: i_in0<=HWDATA[31:0]; 7'b0000100: i_in1<=HWDATA[31:0]; 7'b0001000: i_in2<=HWDATA[31:0]; 7'b0001100: i_in3<=HWDATA[31:0]; 7'b0010000: i_in4<=HWDATA[31:0]; 7'b0010100: i_in5<=HWDATA[31:0]; 7'b0011000: i_in6<=HWDATA[31:0]; 7'b0011100: i_in7<=HWDATA[31:0]; 7'b1000000: enable<=HWDATA[31:0]; endcase 更改為 `ST_WRITE : if (Valid == 1'b1)begin case(HADDR[7:0]) 8'b11000000: i_in0<=HWDATA[31:0]; (0xCC0000C0) 8'b11000100: i_in1<=HWDATA[31:0]; (0xCC0000C4) 8'b11001000: i_in2<=HWDATA[31:0]; (0xCC0000C8) 8'b11001100: i_in3<=HWDATA[31:0]; (0xCC0000CC) 8'b11010000: i_in4<=HWDATA[31:0]; (0xCC0000D0) 8'b11010100: i_in5<=HWDATA[31:0]; (0xCC0000D4) 8'b11011000: i_in6<=HWDATA[31:0]; (0xCC0000D8) 8'b11011100: i_in7<=HWDATA[31:0]; (0xCC0000DC) 8'b11100000 : enable<=HWDATA[31:0]; (0xCC0000E0) endcase SOC Final Project

  6. SOC Final Project 原始程式 if(enable == 31‘d0) begin j <= 31'd0; rr <= 31'd0; end elseif(enable==31'd1) if(k==31'd1) begin begin x0[10:0] <= in0[10:0]; x1[10:0] <= in1[10:0]; x2[10:0] <= in2[10:0]; x3[10:0] <= in3[10:0]; x4[10:0] <= in4[10:0]; x5[10:0] <= in5[10:0]; x6[10:0] <= in6[10:0]; x7[10:0] <= in7[10:0]; x0[11]<= in0[31]; x1[11]<= in1[31]; x2[11]<= in2[31]; x3[11]<= in3[31]; x4[11]<= in4[31]; x5[11]<= in5[31]; x6[11]<= in6[31]; x7[11]<= in7[31]; end if(k==31'd5) begin out0 <= y0; out1 <= y1; out2 <= y2; out3 <= y3; out4 <= y4; out5 <= y5; out6 <= y6; out7 <= y7; rr <= 31'd1; end

  7. SOC Final Project 更改為 always @(enable) begin case(enable) 32'h00000002: begin x0[10:0] <= in0[10:0]; x1[10:0] <= in1[10:0]; x2[10:0] <= in2[10:0]; x3[10:0] <= in3[10:0]; x4[10:0] <= in4[10:0]; x5[10:0] <= in5[10:0]; x6[10:0] <= in6[10:0]; x7[10:0] <= in7[10:0]; x0[11]<= in0[31]; x1[11]<= in1[31]; x2[11]<= in2[31]; x3[11]<= in3[31]; x4[11]<= in4[31]; x5[11]<= in5[31]; x6[11]<= in6[31]; x7[11]<= in7[31]; end 32'h00000004: begin out0 <= y0; out1 <= y1; out2 <= y2; out3 <= y3; out4 <= y4; out5 <= y5; out6 <= y6; out7 <= y7; rr <= 31'd1; end

  8. SOC Final Project Driver.h檔更改前的設定 #define LM_MYIP 0xCC000040 更改後的設定 #define LM_MYIP 0xCC000080

  9. SOC Final Project Driver.cpp檔更改前的程式: int *ptr; ptr=(int *)0xcc000040; *ptr=0; int *write_head; write_head=(int *)0xcc0000C0; *write_head=*x0; *(write_head+1)=*x1; *(write_head+2)=*x2; *(write_head+3)=*x3; *(write_head+4)=*x4; *(write_head+5)=*x5; *(write_head+6)=*x6; *(write_head+7)=*x7; *ptr=1; pooling(); int *read_head; read_head=(int *)0xcc000020; *x0=*read_head; *x1=*(read_head+1); *x2=*(read_head+2); *x3=*(read_head+3); *x4=*(read_head+4); *x5=*(read_head+5); *x6=*(read_head+6); *x7=*(read_head+7);

  10. SOC Final Project 更改後的程式 int *ptr; ptr=(int *)0xcc0000E0; *ptr=2; int *write_head; write_head=(int *)0xcc0000C0; *write_head=*x0; *(write_head+1)=*x1; *(write_head+2)=*x2; *(write_head+3)=*x3; *(write_head+4)=*x4; *(write_head+5)=*x5; *(write_head+6)=*x6; *(write_head+7)=*x7; pooling(); *ptr=4; int *read_head; read_head=(int *)0xcc000080; *x0=*read_head; *x1=*(read_head+1); *x2=*(read_head+2); *x3=*(read_head+3); *x4=*(read_head+4); *x5=*(read_head+5); *x6=*(read_head+6); *x7=*(read_head+7);

  11. SOC Final Project 2-D DCT MATRIX 2-D IDCT MATRIX

  12. Original Picture SOC Final Project

  13. SOC Final Project (Software-DCT)

  14. SOC Final Project (Hardware-DCT)

  15. SOC Final Project • Benchmark Replace software DCT encoder by hardware DCT encoder

  16. SOC Final Project • Future Work • Add RGB->YUV, and Quantizerencoder to MYIP

More Related