1 / 13

DIY Projector Screen | Make Your Own Movie Screen at Home

You can even use a blank wall as a home cinema projector screen - thereu2019s no hard and fast rule. But the catch is that your HD projectoru2019s video quality wonu2019t look nearly as good on a blank wall as it would on a proper screen. So with a few tools and a little effort, you can easily build your very own screen thatu2019s cheap yet gives a satisfying cinematic experience. Make your own movie screen at home. With a little effort, you can build a projector screen for less than half the cost of store-bought ones. Choose the method that seems easiest to you, and enjoy your cheap yet perfectly functional projector screen. Get more ideas by exlporing our website.

Download Presentation

DIY Projector Screen | Make Your Own Movie Screen at Home

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DIY Projector Screen | Make Your Own Movie Screen at Home January 19, 2021 A smart video projector and a screen can bring the cinema right into the comfort of your home. And with the pandemic raging on, there's nothing better than a home cinema where you can get cozy in your blanket and binge-watch your favorite shows and movies. However, projector screens don't come cheap. Most of them cost over a hundred bucks - yikes! While DIY screens aren’t exactly of the same quality as the professional ones are, you won’t notice much of a di?erence most of the time. This post is dedicated to DIY home cinema projector screens. We’ve discussed four ways you can make one all by yourself at home - choose the method that seems easiest to you, and enjoy your cheap yet perfectly functional projector screen. Read on!

  2. 4 Ways to Build a Home Cinema Projector Screen Yourself With a little e?ort, you can build a projector screen for less than half the cost of store-bought ones. Here are four methods you can do so: Fixed Frame Video Projector Screen This one is probably the most laborious method, as you’ll have to use cutting tools and gather lots of equipment from the hardware store. But the results are totally worth it - you get a permanent and super functional projector screen that looks great and displays high-quality videos. Things You’ll Need Four pieces of wood (two longer in length, so they form a perfect rectangle) Eight corner brackets Six ?at metal brackets Long screws Blackout cloth or a white sheet Staple gun with lots of staple pins Miter saw or handsaw A large piece of quilt batting 2 or 3-inch wide artist’s black tape Determine Screen Size First o?, you need to decide how big your screen needs to be. Turn on your projector and set it at the best-suited location. The throw distance of your projector also comes into play here.

  3. Once you’ve decided the placement and how large you’d like the screen to be, mark it down on the wall using a pencil. Use a measuring tape to measure the horizontal and vertical lengths, and be sure to be very precise in this step! Cut the Wood Next, cut two pieces of wood according to the horizontal length and the other three according to the vertical measurement. The third one will run down the center of the frame. You can use either a handsaw or a miter saw to do this step or take the wood to your local home improvement store, where they’ll cut it for you. Just be sure to give them precise measurements.  Add the Flat Brackets Place the wood pieces on a ?at surface on the ground and rearrange them into a rectangle. Now, place the ?at metal brackets at each corner of the rectangle and use a power drill to screw down

  4. and join both pieces of wood. Make sure you use at least three to four screws for a secure joint. Next, place the vertical piece of wood in the center of the rectangle and use the remaining ?at brackets to join it to the frame from both ends. A?ach the Corner Brackets For an extra secure frame, use the corner brackets at all eight corners (the rectangle is divided into two squares once the vertical shaft is screwed on). Once again, use the power drill and some long screws to attach the brackets on the corners from the inside of the frame. Add the Quilt Ba?ng When you’re done building the frame, it’s time to start laying out the foundation of the actual screen. A quilt layer will cover up any uneven surfaces of the wood and help achieve better video quality. So cut the quilt batting according to your screen's size, but keep an extra four inches on each side. Next, lay down the quilt batting on the ground and place the wooden frame on top of it, with the brackets facing upwards. Pull the extra inches of quilt over on top of the wood, and use the staple gun to pin it down. Make sure you’re pulling the quilt layer after every pin to keep it tightly wrapped around, and to ensure there aren’t any wrinkles anywhere. A?ach the Screen Material Finally, the step if you’ve been waiting for - attaching the screen. Place your blackout cloth or white sheet on the ?oor (keep the smooth re?ective surface of the blackout cloth facing downwards).

  5. Now, keep the frame on top of the screen material, with the quilt batting facing downwards. Use the staple gun to pin down the screen the same way you attached the quilt. Just be sure there aren’t any wrinkles, and for this, you’ll have to be super careful. Keep stretching and pulling the fabric, and be sure to staple enough pins on each side. Add the Borders Once you’ve attached the screen, use some artist’s black tape to form a border around your home cinema projector screen. You can skip this step if you want, but the border helps keep ambient light away from the screen and gives a nice clean look to the ?nal piece. Hang the Screen How you hang this screen to the wall is up to you. The easiest way is to screw some long and sturdy screws into the wall at the top edge of the screen and use them to hang the whole thing. You can also go for individual wall hooks and screw them down at the top edge to hang your creation.

  6. Cardboard Using cardboard to make a DIY projector screen is pretty simple, especially compared to what we just described above. You won’t need a lot of stu?, and it gets ?nished fairly quickly. It's also quite portable due to its lightweight, it’s easy to carry around. The only downsides are that this screen won’t be the most re?ective and might get worn out quickly. Things You’ll Need: A big ?at piece of cardboard White sheet OR white spray paint Adhesive hooks Duct tape Measurement tape Something sharp to punch holes Cut the Cardboard

  7. First o?, you’ll have to get yourself a large enough piece of cardboard. You can get one from any departmental store or a home appliances store where they’re bound to have large cardboard boxes. Just ask around. Next, decide the size of your screen by turning on the projector and marking the wall. Measure the lengths as described in the ?rst method. Use these measurements to cut out a rectangle from one side of the cardboard box. However, leave a couple of inches of extra cardboard at the top edge - you’ll use this for hanging the screen. Punch Holes The next step involves punching two holes at the top corners of the cardboard. These will help you hang the cardboard anywhere. Use anything sharp, such as a scissor, to poke through the cardboard at both of the top corners. The holes should be an inch above where your actual screen starts. Also, make sure these holes are large enough for your adhesive hooks to ?t.  Paint/A?ach Sheet You can either choose to paint the cardboard white or use a white sheet to form the screen. If you’re using a sheet, spread it on the ?oor as straight and wrinkle-free as possible and lay the cardboard on top of it. Pull the extra inches of the sheet from the sides on top of the cardboard as tightly as you can.

  8. Now, use duct tape to tape the sheet to the cardboard at the back. Repeat this for all of the edges, and once again, make sure it’s tight, and there aren’t any wrinkles at the front. If you’re using spray paint, your task becomes more manageable. Just use white spray paint to paint the screen's front in a well-ventilated area (preferably outside). Tip: to coat the cardboard evenly, don’t spray at one area for too long. A?ach Hooks and Hang the Screen Lastly, attach the adhesive hooks exactly where the holes of the screen will be located. You might have to make some careful measurements before sticking the hook. Once that’s done, hang the screen on to the two hooks, and voila - you’ve got a fully functional screen to stream movies. If you want to move it to another location, detach the adhesive hooks and place them elsewhere - no screws are needed for this method!  Wrapping Paper If the cardboard method seems too much for you, then this method is even easier.

  9. It involves using non-glossy and smooth white wrapping paper to form an easy and cheap DIY video projector screen.  Things You'll Need: Just some sturdy and matte white wrapping paper, scissors, and double-sided tape - that's all. Oh and, an empty wall, of course. Cut the Wrapping Paper Wrapping paper isn’t exactly wide like a blackout cloth or sheet - it’s only as wide as your arm. So for this method, you’ll ?rst have to measure and mark the vertical length of your screen. Next, roll out the paper to as long as the screen's vertical length and cut straight across. S?ck It

  10. Stick the double-sided tape at each edge of the wrapping paper. Next, stick the paper on the wall vertically, so the shorter side of the paper forms the top edge of the screen. Also, be careful to spread and stick the paper carefully so it doesn’t tear apart, and there aren’t any wrinkles. Repeat So far, you’ve probably created only a quarter of your screen. Keep sticking more pieces of wrapping paper side by side on the wall until you’ve reached the desired length of your screen. Tip: The trick here is to overlap each piece of wrapping paper slightly, so there isn’t any wall peeking from between the pieces. Addi?onal Step: Add Borders You don’t have to do this, but as we mentioned earlier, a black border helps with contrast. So consider using black tape along the edges of the screen. Paint! This method may or may not prove to be costly, depending on the type of paint you use. We recommend using projector screen paint - a special paint that turns any wall into a screen-like surface. If you’re not into building any stu? and want to turn your wall into a high-quality screen, then projector paint is your best bet. However, this paint is expensive and costs almost as much as a regular projector screen. So instead, you can use standard white paint that’s not glossy but not very matte either. You won’t get the same quality with regular paint as you would with projector screen paint, but it’s still a reasonably e?ective method.

  11. Things You’ll Need Projector paint or standard white paint Dark paint (optional) Wall primer Sandpaper Tape Small roller Even Out the Surface Use sandpaper to even out any bumps and rough areas on the wall. Make sure everything’s looking super smooth and clean before you move on to the next steps. Mark boundaries and Prime Now, measure and mark the screen's length and use a small roller to apply a coat of primer on the wall. Let it dry completely. Apply the Dark Paint Next, paint the entirety of your wall with any dark color of your choice, leaving the screen space white. This will help distinguish the screen from the rest of the wall and add contrast, but you can skip this step if you want.

  12. Tape and Paint Stick some tape to the edges of the screen so that you don’t accidentally apply white paint on the dark area of the wall. You can peel it o? once you’re done painting the screen space. Use a small roller to apply two coats of white paint, letting the ?rst coat dry completely before applying the next. Once everything’s nice and dry, peel o? the tape and enjoy the big screen. Conclusion Honestly? You can even use a blank wall as a home cinema projector screen - there’s no hard and fast rule. But the catch is that your HD projector’s video quality won’t look nearly as good on a blank wall as it would on a proper screen. So with a few tools and a little e?ort, you can easily build your very own screen that’s cheap yet gives a satisfying cinematic experience. Tags: home cinema projector smart projector video projector

  13. ← Back to News Sign up to our mailing list Get ?rst access to promotions and deals! Your email Subscribe Gift Card Shipping and Returns Replacements & Warranty Privacy Policy Terms of Service © 2021 Prima Projector. All Rights Reserved.

More Related