1 / 2

InduBox GPRS Firmware V1.1 Flowchart for Serial Communication

This flowchart guides firmware version 1.1 configuration for serial communication at 9600 baud rate, N81 settings, and SIM initialization. Instructions include checking phonebook, sending SMS, and handling various commands.

preston-nunez
Download Presentation

InduBox GPRS Firmware V1.1 Flowchart for Serial Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Start: N Switch down ? Switch down ? Y Y InduBox GPRS Flowchart for firmware V1.1 all serial comm. 9600 N81 N Quik_off Quik_on Init_Quik Init_sim Check_phonebook - - - to Display Init_sms End: Delete_SMS_mess. MAIN LOOP Bausch Datacom - Filip Lavaerts / “Steel flowchart V1.1.ppt” 20.04.04 page 1/2

  2. GSM data active SMS in Check message “Status” ? Y SMS status message “Listen.on” ? IF /Listen.on ? Y GPRS attachment PPP connection MAIN LOOP Sck LISTEN mode ON “Listen.off” ? IF Listen.on ? Y Sck LISTEN mode OFF SMS Listen.on message + IP address Stop PPP GPRS deattachment SMS Listen.off message Listen.on mode active ? SCK remotely close ? Y Sck open remotely SCK open Y SCK LISTEN mode OFF In 1 low ? GPRS attachment PPP connection Stop PPP GPRS deattachment SCK OPEN Out 2 HIGH In 1 OPEN ? Y SCK CLOSE Stop PPP GPRS deattachment In 3 or 4 low ? SMS message Out 2 Low Bausch Datacom - Filip Lavaerts / “flowchart V1.1.ppt” 20.04.04 page 2/2

More Related