1 / 20

Earthwork: Use of Fine Grained & Granular Material

Earthwork: Use of Fine Grained & Granular Material. Introduction. Earthwork consists of: Material excavations (cuts) Material embankments (fills) Common types of work: Roadways & Transportation Systems Foundations Systems Water Management Systems (ponds, channels, etc.).

pelham
Download Presentation

Earthwork: Use of Fine Grained & Granular Material

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Earthwork:Use of Fine Grained & Granular Material

  2. Introduction • Earthwork consists of: • Material excavations (cuts) • Material embankments (fills) • Common types of work: • Roadways & Transportation Systems • Foundations Systems • Water Management Systems • (ponds, channels, etc.)

  3. Importance of Soil Quality • If pavement is to remain smooth & stable.. AND • If structures are to remain stable and undamaged due to settlement….. THE SOIL ON WHICH THEY ARE BUILT MUST ALSO BE STABLE AND MUST FURNISH UNIFORM SUPPORT!

  4. Materials Normally Suitable for Earthwork: • Natural Soil Material: • Created by nature (except organics) • Material that is mined or excavated • Material must have a laboratory dry weight of at least 90 lbs. per cubic foot • Materials that weight less generally have too much organic matter …this leads to excessive compressibility

  5. Materials Normally Suitable for Earthwork • Natural Granular Materials: • Includes broken rock, gravel, sand, durable siltstone, durable sandstone that can be placed in 8” loose lifts. • These are generally mixtures of coarse & fine particle sizes

  6. Engineering Properties of Granular Soils (Sand & Gravel) • Good foundation & embankment material • Not frost susceptible & are free draining • May erode on embankment side slopes • Identified by particle size • Easily compacted when “well graded”

  7. Engineering Properties of Fine Grained Soils (Clay & Silt) • Often have low strengths • (crush under load) • Plastic & compressible • Lose strength when wet or disturbed • Practically impervious • Slopes are prone to sliding & eroding • Frost susceptible • Shrink & swell with change in water content

  8. Why is particle size important? • Soil’s performance is largely dependant on its particle size distribution (gradation) • For example: • Backfill behind a retaining wall must be free draining WHAT MATERIAL TYPE WOULD WE WANT?

  9. Why is particle size important? For example: We want a free draining compactable soil for a sub base beneath a foundation. Stated previously: • compactability of soil largely depends on “gradation” or “grain size distribution” WHAT HAPPENS TO YOU WHEN YOU STEP ON A PILE OF GRAVEL OF UNIFORM SIZE? WHAT IF THE GRAVEL WAS MIXED WITH SAND AND SMALLER PARTICLES?

  10. Load carrying capacity will be affected by particle size distribution

  11. Construction Specifications • Construction project specifications set limits for particle size based on the required performance of the soil/material • Engineer will require certain soil/material characteristics • Soil/material must be tested in the lab to determine suitability for the project • FOR EXAMPLE:

  12. Soil Classification • Soils are classified according the grain size distribution • Both ASTM & AASHTO classification systems reference sieve analysis

  13. We Can Also Accurately Describe Soil Texture • Soil texture refers to the relative proportion of sand, silt and clay size particles in a sample of soil. • Soils that are dominated by clay are called fine textured soils. • Those dominated by larger particles are referred to as coarse textured soils

  14. Soil Texture Triangle: • Sieve analysis will reveal % sand, silt, clay (see graph) • What is the texture class for a soil having 45% clay, 45% silt, and 10% sand?

  15. Gradation Examples

  16. Sieve Size Information

  17. Lab Procedures • Particle Size Analysis testing is broken down into 2 parts: • 1. Sieve analysis (Sand & Gravel Portion) • 2. Hydrometer analysis (Silt & Clay Portion)

  18. Today’s Lab:Particle Size Analysis of Coarse Grained MaterialASTM D-422 We will determine “gradation”, or also referred to “particle size distribution” of a granular soil

  19. Our Lab Agenda • Sieve Analysis This Lab • Hydrometer Analysis Next Lab

More Related