1 / 16

KIN2 q=19 ° .30 deuterium

The Problem. KIN2 q=19 ° .30 deuterium. t min =-0.123 GeV 2 q’=2.78 GeV P’ d =.352 Gev. Inner calo 10x9 block. R=13.5 cm q g ’ =8°. t min =-0.33 GeV 2 q’=2.72 GeV P’ d =.579 Gev. How to detect the maximum of recoil deutons with reasonable silicon detector

paxton
Download Presentation

KIN2 q=19 ° .30 deuterium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Problem KIN2 q=19°.30 deuterium tmin=-0.123 GeV2 q’=2.78 GeVP’d=.352 Gev Inner calo 10x9 block R=13.5 cm qg’=8° tmin=-0.33 GeV2 q’=2.72 GeVP’d=.579 Gev How to detect the maximum of recoil deutons withreasonablesilicon detector Withoutinterferewith the acceptedexperiment PYB

  2. Reasonnable silicona+/- 40° angular range ===> close of the Target as possible 2 cm 20° Move the beam it is possibleletsaid 1cm Detector close to 1cm from the target Silicon detector dimension +/- 2xtan(40°)/sin(18)=+/-5.42cm which is limit of reasonable This insure that all the dvcs events produced in the target and with -tmin <t<0.33GeV2 And with fg<90° or fg>270° are emitted in front of the silicon. PYB We favor the Beth-Heither process

  3. D 18o f Q=k-k’ QgD TD MEV QgD PYB -t GeV2

  4. LD2 a SILICON 2 Stop in Si DE>> MeV 3 Stop after Si DE<10 MeV 1 Stop in LD2 DE=0 2 2 DE=0 DE=0 3 3 1 1 T Mev cosa At angle a fixed At T fixed Note: With a Silicon thickness of 1mm (DE)2~5-10MeV . In the silicon of Compton Polarimeter (DE)3~0.3 MeV PYB

  5. Conclusion: it is possible to do a full f distribution between -80o to+80o f for the bin [2.6,3.] GeV2 in –t . in this bin DE is >3MeV  10 times bigger that in the Compton Polarimeter PYB

  6. Siliconstrips: 1mm 2 cm 100 mm 16x(5.5x50 mm2) strips PYB 32 strips

  7. Using ARS allow: Times coincidence ~ 1-2 ns DE analyze Vacuum feed-through Like this of the polarimeter Compton ARS ARS Charge amplifier . + derivation Only the charge amplifier require a new study PYB

  8. Proton from the electro-desintegration of the deuton e+De+n+p • Moller electrons Are the two dominant backgrounds The proton field was computed by Pavel:

  9. PYB

  10. 15 cm LH2 I=10mA 32 stripes : 5,5 x100 mm2 at 2 cm from the beam But some stop in the deuterium  Tp< 21 MeV PYB

  11. Electron Backgroung: 2 cm Tan(a)=d/l=2/16  a=7.12° The forward part of the silicon must have difficulties. If it the case 1,2 or n strips can be forgotten The best will be to use a shorter target 5 or 4 cm  a= 18o But that will implied to increase beam intensity to 20 µA and this intensity require the use of the raster !!!!!! PYB

  12. Possible Improvement 20 o Target f=20 mm

  13. An other setup 18o D=8cm 0 X

  14. But an any case the absorption in the LH2 will conduct at the same range in t and f

  15. My feeling: • It is technically doable* for KIN2 • It will be better to used a 4 or 5 cm target !! • The range in t and f is limited . • In this range a cross section can be extract • In this range the B-H is dominant * • mechanical support of the silicon • vacuum feed –through • position of target versus beam • Preamplifier “Le jeu en vautil la chandelle ?” Knowing that this technique will be and more difficult to be applied at the 12 GeV when Q2 and twill increase. PYB

More Related