1 / 18

High-Performance MEMS-Based Deformable Mirrors for Adaptive Optics Iris AO, Inc.

High-Performance MEMS-Based Deformable Mirrors for Adaptive Optics Iris AO, Inc. Iris AO Inc . Founded in 2002 Small high-technology firm specializing in AO Aim to build high-performance, robust MEMS based DMs that address a large application space

paulos
Download Presentation

High-Performance MEMS-Based Deformable Mirrors for Adaptive Optics Iris AO, Inc.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. High-Performance MEMS-Based Deformable Mirrors for Adaptive Optics Iris AO, Inc.

  2. Iris AO Inc • Founded in 2002 • Small high-technology firm specializing in AO • Aim to build high-performance, robust MEMS based DMs that address a large application space • Funded by SBIR grants, CfAO grants, consulting and driver / DM sales

  3. Iris AO Segmented MEMS DM • Robust assembled mirror surface stays flat • Temperature insensitive bimorphs elevate mirror above substrate • Piston/tip/tilt electrostatic actuation

  4. Electrostatic DM Actuators • Actuators wired to periphery • Electrostatic forces pull actuators down • No hysteresis • 4.2 mm aperture • Engineered stresses create beam shape • Stroke determined by design, not process

  5. Assembled SOI Mirrors: Benefits • Single crystal mirror has excellent flatness • Thickness gives rigidity • Mirror is still flat after optical coating • Stays flat over varying operating conditions • Temperature • Actuation • High fill factor • Mirrors cover bimorph flexures • Etch holes not necessary

  6. Scalable Assembly: 367 Demo

  7. DM Stroke: Position vs. Voltage • Nonlinear position • Very repeatable

  8. 2nd Generation Assembled Mirrors

  9. 2nd Generation Assembled Mirrors

  10. Surface Figure vs. Temperature • Optical coating on the DMs forms a bimorph that deforms with change in temperature • Some coating stacks have shown to reduce stress mismatches • These stacks do NOT help when materials plastically deform • Best coating for MEMS used for MIR is Au • Au plastically deforms at >~100MPa

  11. Surface Figure vs. Temperature

  12. Bimorph-Flexure Benefits • Stroke (gap) dictated by design, not process • Simple design with a lot of latitude for design changes • Materials chosen to minimize deflection vs. temperature • Position vs. Temperature = ~2nm/°C • Film non-uniformity across 6” wafer < ~5% • Non-uniformity across chip < 1% • Differences in height due to temperature swings are minimal

  13. Bimorph-Flexure Temperature Stability

  14. Electrostatic Actuation • No hysteresis • Nonlinear with Voltage • Highly repeatable • Temperature independent • Often high-voltages involved (200V) • High voltage is a potential reliability problem • Electrode erosion • Dielectric breakdown • Leakage currents • Dielectric charging • Iris AO DMs operate over 60-130V

  15. Detailed Position vs. Voltage Data

  16. Experimental Deflection 3.5 micron stroke segment, 60 volts

  17. Experimental Deflection - High Stroke 7.5 micron stroke segment, 130 volts

  18. Experimental Deflection - 7 segments

More Related