1 / 27

Hand and Power Tools

Hand and Power Tools . Learning Objectives. Objectives are to: Provide information required by the OSHA Standards for Hand and Power Tools as found in 29 CFR 1910 Subpart P Identify hazards Precautions. Agenda. Presentation Agenda: Safety precautions Proper use Hazards

paul
Download Presentation

Hand and Power Tools

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hand and Power Tools

  2. Learning Objectives • Objectives are to: • Provide information required by the OSHA Standards for Hand and Power Tools as found in 29 CFR 1910 Subpart P • Identify hazards • Precautions

  3. Agenda • Presentation Agenda: • Safety precautions • Proper use • Hazards • Responsibilities

  4. Section 1 General Safety Precautions

  5. Tools Can Be Dangerous • Tool safety: • Pose hazards • Manufactured with safety in mind • Know hazard and safety precautions

  6. General Safety Precautions • Five basic safety rules: • Keep in good condition • Use the right tool for the job • Examine damage before use • Read manufacturer's instructions • Use proper protective equipment

  7. Section 2 Hand Tools

  8. Hand Tools • Hand tool safety: • Hazards are misuse and improper maintenance • Employer provide safe and proper hand tools • Employees use hand tools properly

  9. Personal Protective Equipment • Personal protective equipment: • Appropriate protective equipment • Floors clean and dry • Tools can be an ignition source

  10. Section 3 Power Tools

  11. Power Tool Classifications • Classes of power tools: • Electric • Pneumatic • Fuel-powered • Hydraulic

  12. Power Tool Precautions • Power tool safety: • Do not yank or carry by cord or hose • Avoid heat, oil, and sharp edges • Disconnect tools when not in use • Keep others at a safe distance • Avoid accidental starts and wear proper apparel

  13. Safety Devices • Safety switches and guards: • Safety switches prevent injury • Constant pressure switch • Designed to shut off power • Lock-on control

  14. Guards • Provide guards to protect from: • Point of operation • In-running nip points • Rotating parts • Flying chips and sparks • Never remove guards

  15. Electric Tools • Be aware of several dangers: • Electrocution • Burns and slight shocks • Shock can cause a fall • Must be grounded

  16. Double-Insulated Tools • Hand tools with non-metallic cases: • Often used in damp locations • Water conductor of electricity • Disconnect power source Double Insulated marking

  17. Extension Cords and Electrical Concerns • Extension cords: • Cords suffer wear and tear • Exposed wires are hazardous • Use protective measures • GFCI

  18. Electric Tool Safety • General safety practices for using electric tools: • Operate within design limitations • Use of gloves and safety footwear • Store in a dry place • Avoid damp or wet locations • Work areas well-light

  19. Powered Abrasive Wheel Tools • Abrasive wheel hazards: • Flying fragments • Inspect closely • Sound or ring-tested • Fits freely on the spindle • Spindle nut tight

  20. Powered Abrasive Wheel Tool Safety • Powered grinder: • Never stand in front • Use safety guards eye protection • Turn off the power after use • Never clamp a hand-held grinder

  21. Pneumatic Tools • Pneumatic tool safety: • Personal protective equipment • Hose connections • Safety clip

  22. Fuel-Powered Tools • Hazards of fuel-powered tools: • Flammable fuels • Generate heat • Avoid hot areas • Operated by trained employees

  23. Fuel-Powered Tool Safety • Remember the following: • Turn off prior to refueling • Follow proper service maintenance • Clean up leaks or spills immediately • Use protective equipment

  24. Hydraulic Tools • Do not exceed operating pressure for: • Hoses • Valves • Pipes • Filters • Other fittings

  25. Section 4 Your Responsibilities

  26. Your Responsibilities • Prevent tool hazards: • Good condition • Right tool for the job • Examine for damage • Operate according to the manufacturer's instructions • Proper protective equipment

  27. Additional Information • Small Business Handbook. Small Business Safety and Health Management Series. OSHA 2209-02R. 2005. • Hand and Power Tools. OSHA Publication 3080. 2002.

More Related