1 / 34

Notation for Mirrors and Lenses

Notation for Mirrors and Lenses. The object distance is the distance from the object to the mirror or lens Denoted by p The image distance is the distance from the image to the mirror or lens Denoted by q

nubia
Download Presentation

Notation for Mirrors and Lenses

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Notation for Mirrors and Lenses • The object distance is the distance from the object to the mirror or lens • Denoted by p • The image distance is the distance from the image to the mirror or lens • Denoted by q • The lateral magnification of the mirror or lens is the ratio of the image height to the object height • Denoted by M

  2. Images • Images are always located by extending diverging rays back to a point at which they intersect • Images are located either at a point from which the rays of light actually diverge or at a point from which they appear to diverge

  3. Types of Images • A real image is formed when light rays pass through and diverge from the image point • Real images can be displayed on screens • A virtualimage is formed when light rays do not pass through the image point but only appear to diverge from that point • Virtual images cannot be displayed on screens

  4. Images Formed by Flat Mirrors • Simplest possible mirror • Light rays leave the source and are reflected from the mirror • Point I is called the image of the object at point O • The image is virtual

  5. Images Formed by Flat Mirrors • One ray starts at point P, travels to Q and reflects back on itself • Another ray follows the path PR and reflects according to the law of reflection • The triangles PQR and P’QR are congruent

  6. Lateral Magnification • Lateral magnification, M, is defined as • This is the general magnification for any type of mirror • It is also valid for images formed by lenses • Magnification does not always mean bigger, the size can either increase or decrease • M less than 1 -> image size decreased • M greater than 1 -> image size increased

  7. Reversals in a Flat Mirror • A flat mirror produces an image that has an apparent left-right reversal • For example, if you raise your right hand the image you see raises its left hand

  8. Spherical Mirrors • A spherical mirror has the shape of a section of a sphere • The mirror focuses incoming parallel rays to a point • A concave spherical mirror has the silvered surface of the mirror on the inner, or concave, side of the curve • A convex spherical mirror has the silvered surface of the mirror on the outer, or convex, side of the curve

  9. Convex vs Concave

  10. Spherical aberation No clear focusing of the incident rays

  11. R R Spherical mirrors

  12. d Spherical Mirrors F S C P

  13. Ray Tracing • Parallel ray hit the mirror and heads to the focus • Ray through focus hits the mirror and comes off parallel • Ray through center of curvature returns to center of curvature F C

  14. Ray Tracing • Parallel ray hits the mirror and reflects as if it started at the focus • Ray heading to the focus hits the mirror and comes off parallel • Ray heading to the center of curvature returns along the same path C F

  15. Magnification Gain is a better description since M might be < 1 Or:

  16. Sign Conventions

  17. Example: Find the image C F f = 20 cm p = 32 cm h = 5 cm

  18. Images Formed by Refraction

  19. Sign Conventions for Refracting Surfaces

  20. Flat Refracting Surfaces • If a refracting surface is flat, then R is infinite • Then q = -(n2 / n1)p • The image formed by a flat refracting surface is on the same side of the surface as the object • A virtual image is formed

  21. Locating the Image Formed by a Lens • The lens has an index of refraction n and two spherical surfaces with radii of R1 and R2 • R1 is the radius of curvature of the lens surface that the light of the object reaches first • R2 is the radius of curvature of the other surface • The object is placed at point O at a distance of p1 in front of the first surface Small!!

  22. Lens Makers’ Equation • The focal length of a thin lens is the image distance that corresponds to an infinite object distance • This is the same as for a mirror • The lens makers’ equation is

  23. Thin lenses - converging

  24. Thin lenses - diverging

  25. Ray Tracing Rules • A ray parallel to the axis exits through the focal point • A ray through the focal point leaves parallel to the axis • A ray through the center is undeviated

  26. Ray Diagram for Converging Lens, p < f • The image is virtual • The image is upright • The image is larger than the object • The image is on the front side of the lens

  27. Ray tracing for a diverging lens

  28. Sign Conventions

  29. Example A 2 cm tall object is placed 30 cm in front of a diverging lens with a focal length of –20 cm. Find the location of the image, its classification, the size of the image, and the magnification. Construct a ray diagram.

  30. Lateral (Transverse) magnification h h’ But: Or:

  31. Multiple Thin Lenses • Find the image distance of the first lens. • Use the image of the first lens as the object of the second lens. • Find the new object distance by correcting with the separation of the lenses. • Find the image of the second lens. • Transverse Magnification is the product of the magnifications of the individual lenses

  32. Example Find the location and magnification of the final image formed

  33. 9. A spherical convex mirror has a radius of curvature with a magnitude of 40.0 cm. Determine the position of the virtual image and the magnification for object distances of (a) 30.0 cm and (b) 60.0 cm. (c) Are the images upright or inverted? 11. A concave mirror has a radius of curvature of 60.0 cm. Calculate the image position and magnification of an object placed in front of the mirror at distances of (a) 90.0 cm and (b) 20.0 cm. (c) Draw ray diagrams to obtain the image characteristics in each case. 12. A concave mirror has a focal length of 40.0 cm. Determine the object position for which the resulting image is upright and four times the size of the object.

  34. 29. The left face of a biconvex lens has a radius of curvature of magnitude 12.0 cm, and the right face has a radius of curvature of magnitude 18.0 cm. The index of refraction of the glass is 1.44. (a) Calculate the focal length of the lens. (b) What If? Calculate the focal length the lens has after is turned around to interchange the radii of curvature of the two faces. 31. A thin lens has a focal length of 25.0 cm. Locate and describe the image when the object is placed (a) 26.0 cm and (b) 24.0 cm in front of the lens. 34. A person looks at a gem with a jeweler’s loupe—a converging lens that has a focal length of 12.5 cm. The loupe forms a virtual image 30.0 cm from the lens. (a) Determine the magnification. Is the image upright or inverted? (b) Construct a ray diagram for this arrangement.

More Related