1 / 5

ECAL Lab measurements: summer plans

ECAL Lab measurements: summer plans . What we have Fully functionnal scan setup with electron gun 2 batches of 4 scintillators (already scanned) 4x 15x15 mm 2 (3M foil and reflective paint) 4x 20x20 mm 2 (3M foil and reflective paint) 15 naked scintilliators (not scanned) 5x 20x20 mm 2

nasya
Download Presentation

ECAL Lab measurements: summer plans

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECAL Lab measurements: summer plans • What we have • Fully functionnal scan setup with electron gun • 2 batches of 4 scintillators (already scanned) • 4x 15x15 mm2 (3M foil and reflective paint) • 4x 20x20 mm2(3M foil and reflective paint) • 15 naked scintilliators (not scanned) • 5x 20x20 mm2 • 5x 15x15 mm2 • 5x 10x10 mm2 • A few sheets of 3M relfective foil • Functionnal analysis software

  2. ECAL Lab measurements: summer plans • What I would like to do • Re-scan some of the existing tiles (training) • Prepare new batches of scintillators • wrap some ourselves (need glue?) • paint some ourselves (need paint) • Scan new scintillators • Document full set of comparisons betwee sizes and light-containment solutions • How much light do we collect? • How uniform is the response?

  3. ECAL Lab measurements: summer plans • What we have started doing • Hardware • re-cabled the entire setup (training) • re-aligned electron gun with trigger • check that signals are ok on the oscilloscope • Note: gun was dismantled by RP during tests with another assembled gun (C. Joram) • magnetic field has changed due to change in tightness of assembly of the various metallic parts • absolute calibration is obselete • but does not affect usage (just new working point) • Software • re-analyse existing data (training)

  4. Measurements done by C. Joram and C. Alfieri using Hall probe Done with RP on two assembled electron guns (Note: “OLD” is ours)

  5. Measurements done by C. Joram and C. Alfieri using Hall probe Done with RP on two assembled electron guns (Note: “OLD” is ours)

More Related