1 / 25

IE 419/519 Wireless Networks

IE 419/519 Wireless Networks. Lecture Notes #6 Spread Spectrum. Introduction. In 1985, the FCC modified Part 15 of the radio spectrum regulation Governs unlicensed devices Attempt to stimulate the production and use of wireless network products

nanda
Download Presentation

IE 419/519 Wireless Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IE 419/519Wireless Networks Lecture Notes #6 Spread Spectrum

  2. Introduction • In 1985, the FCC modified Part 15 of the radio spectrum regulation • Governs unlicensed devices • Attempt to stimulate the production and use of wireless network products • The modification authorized wireless network products to operate in the Industrial, Scientific, and Medical (ISM) bands using spread spectrum modulation • 902 - 928 MHz • 2.4 - 2.4835 GHz • 5.725 - 5.850 GHz

  3. Introduction • FCC allows users to operate wireless products without obtaining licenses if the products meet certain requirements • e.g., Operation under 1 watt transmitter output power • This deregulation of the frequency spectrum eliminates • Need to perform costly and time-consuming frequency planning to avoid interference with existing radio systems • Need to license product again at a new location (if equipment is moved)

  4. Digital Signal • Analog Signal • Digital Signal • Analog Signal Spread Spectrum Encoding • Digital data • Analog data • Which option to choose? • Requirements to meet • Media & communications facilities • Spread Spectrum • Can be used to transmit either analog or digital data, using an analog signal

  5. Spread Spectrum • Input is fed into a channel encoder • Produces analog signal with narrow bandwidth • Signal is further modulated using sequence of digits • Spreading code or spreading sequence • Generated by pseudonoise, or pseudo-random number generator • Effect of modulation is to increase bandwidth of signal to be transmitted

  6. Spread Spectrum • On receiving end, digit sequence is used to demodulate the spread spectrum signal • Signal is fed into a channel decoder to recover data

  7. Spread Spectrum • What can be gained from apparent waste of spectrum? • Immunity from various kinds of noise and multipath distortion • Anti-jamming performance • Interference immunity • Can be used for hiding and encrypting signals • Low probability of intercept • Low transmit power density • Several users can independently use the same higher bandwidth with very little interference • Multiple access communications • Multiple simultaneous transmissions

  8. Types of Spread Spectrum • Frequency Hopping Spread Spectrum (FHSS) • First type developed • Direct Sequence Spread Spectrum (DSSS) • More recent technology

  9. Frequency Hopping SS • Signal is broadcast over seemingly random series of radio frequencies • A number of channels allocated for the FH signal • Width of each channel corresponds to bandwidth of input signal • Signal hops from frequency to frequency at fixed intervals • Transmitter operates in one channel at a time • Bits are transmitted using some encoding scheme • At each successive interval, a new carrier frequency is selected

  10. Frequency Hopping SS Source: http://murray.newcastle.edu.au/users/staff/eemf/ELEC351/SProjects/Morris/types.htm

  11. Frequency Hopping SS • Hopping Sequence • Channel sequence dictated by spreading code • Pseudorandom number serves as an index into a table of frequencies • Chip Period • Time spent on each channel • FCC regulation  maximum dwell time of 400 ms • IEEE 802.11 standard  300 ms • Chipping rate • Hopping rate

  12. Frequency Hopping SS • Receiver, hopping between frequencies in synchronization with transmitter, picks up message • Advantages • Eavesdroppers hear only unintelligible blips • Attempts to jam signal on one frequency succeed only at knocking out a few bits

  13. FHSS Performance Considerations • Large number of frequencies used • Results in a system that is quite resistant to jamming • Jamming signal must jam all frequencies • With fixed power, this reduces the jamming power in any one frequency band

  14. Direct Sequence SS • Each bit in original signal is represented by multiple bits in the transmitted signal • Spreading code spreads signal across a wider frequency band • Spread is in direct proportion to the number of bits used • One technique combines digital information stream with the spreading code bit stream using exclusive-OR

  15. Direct Sequence SS Source: http://www.sss-mag.com/primer.html Source: http://murray.newcastle.edu.au/users/staff/eemf/ELEC351/SProjects/Morris/types.htm

  16. Direct Sequence SS

  17. Processing Gain • Unique property of spread specturm waveforms • Used to measure the performance advantage of spread spectrum against narrowband forms

  18. Processing Gain in FHSS

  19. Processing Gain in DHSS • In a DS system • Random binary data has a bit rate of Rb • The pseudorandom binary waveform has a rate of Rc

  20. Code-Division Multiple Access • Basic Principles of CDMA • Start with a data signal with rate D • Break each bit into kchips • Chips are a user-specific fixed pattern • Chip data rate of new channel = kD

  21. Code-Division Multiple Access • Advantage • Good protection against interference and tapping • Disadvantages • Receiver must be precisely synchronized with the transmitter to apply the decoding correctly • Receiver must know the code and must separate the channel with user data from the background noise composed of other signals and environmental noise

  22. CDMA Example • If k=6 and code is a sequence of 1s and -1s • For a ‘1’ bit, A sends code as chip pattern • <c1, c2, c3, c4, c5, c6> • For a ‘0’ bit, A sends complement of code • <-c1, -c2, -c3, -c4, -c5, -c6> • Receiver knows sender’s code and performs electronic decode function • <d1, d2, d3, d4, d5, d6> = received chip pattern • <c1, c2, c3, c4, c5, c6> = sender’s code

  23. CDMA Example • User A code = <1, –1, –1, 1, –1, 1> • To send a 1 bit = <1, –1, –1, 1, –1, 1> • To send a 0 bit = <–1, 1, 1, –1, 1, –1> • User B code = <1, 1, –1, – 1, 1, 1> • To send a 1 bit = <1, 1, –1, –1, 1, 1> • Receiver receiving with A’s code • (A’s code) x (received chip pattern) • User A ‘1’ bit: 6 -> 1 • User A ‘0’ bit: -6 -> 0 • User B ‘1’ bit: 0 -> unwanted signal ignored

  24. CDMA for DSSS

  25. Spread Spectrum

More Related