1 / 35

Development of X-band High-Gradient structures at Tsinghua University

This workshop presentation provides an overview of the development of X-band high-gradient structures at Tsinghua University, including the design, production, and testing processes. It covers the T24_THU_#1 structure, choke-mode structure, X-band metallic power extractor, and the C3 structure for Thomson scattering source. The presentation also discusses the future work and upgrades in X-band technology.

michelea
Download Presentation

Development of X-band High-Gradient structures at Tsinghua University

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CLIC Workshop 2016 CERN, Geneva Development of X-band High-Gradient structures at Tsinghua University Jiaru Shi Tsinghua University (on behalf of high-gradient team) 2016/01/19

  2. outline • Overview of X-band at Tsinghua • Production in Tsinghua • Development of Structures • T24_THU_#1 structure • Choke-mode structure • X-band metallic power extractor • C3 structure for TBA at Argonne • Tsinghua Thomson Source

  3. X Band S Band Overview of X-band at Tsinghua • Industrial X-band linacs 9.3GHz • Since 1990s 2.5MeV Accelerating tube X-band 2.5MeV Linac 6 MeV Accelerating tube

  4. X-band HG • CLIC-study collaboration • Start from 2009 • “Choke-mode damped structure”, design, producing, testing, … • T24 • Single-cell choke • TD24-choke • Tsinghua Thomson scattering source • Status • Upgrade • New x-band power source

  5. Tsinghua Production – Key facility to HG high-precision machine tools and CNC Machine Clean room for RF Measurement Hydrogen furnace

  6. T24_THU_#1 fab/test flow Design for CLIC (CERN) Fabrication of parts (VDL) High power test (Nextef-KEK) Cleaning Etching (Tsinghua Univ.) Bench test (Tsinghua Univ.) Vac bake (Tsinghua Univ.) Tuning(TsinghuaUniv.) Bonding Brazing (Tsinghua Univ.)

  7. The assembly of T24_THU_#1Bonding • Reduced pressure at 0.1MPa.

  8. The assembly of T24_THU_#1 (5)Tuning and baking • Bench test showed an excellent result after Tuning • Baking is done at 500 degree C, 5 days • Compare to 650 degree C, 10 days @KEK/SLAC/CERN

  9. Full history of T24_THU_#1 • Operation started from 2014.10.22 and ended on 2015.7.2 • Totally 6.08e8 Pulses (≈3378 RF-on hours)and 5908 Acc BDs • Conditioning at 51ns, 91ns, 132ns, 173ns, 213ns, 252ns, also try longer pulse width operation at 331ns, 372ns, 412ns

  10. BDR vs RF pulses • Full map of BDR transition • BDR calculated by last 1M pulses • BDR decrease slightly when input power keeps constant, but still many BDR rising peaks

  11. Normalized Gradient Normalized to BDR of 2e-5 bpp/struc and pulse width of 252ns

  12. BD location of T24_THU_#1

  13. Choke-mode structure 2.0mm 1.2mm 1.6mm [1] HaoZha New choke design CDS-C Features include “two-section”, “impedance matching”, “detuning”

  14. Damping result [1] HaoZha

  15. Single-cell SW test structure • Single cell standing wave • 1C-SW-A3.75-T2.6-CHOKE1.6 [Ref: V. Dolgashev] • To test breakdown behavior in the Choke • Also test un-damped to compare

  16. SW choke-mode cavity diffusion bonding

  17. SW choke-mode cavity diffusion bonding test

  18. Geometry of G1.68 choke r5 r5 d2 g23 d3 • d1 is the gap of the choke • Gap is 1.68mm in origin design 3xr1 r7 c3 c2 r_endpipe r4 r8 d23 b_end b tx3 b_in b_coup ebx3 a_in a_end a a r3 d1 c1 d_in d d-t/2 r2

  19. Bench test before bonding • Bench test result is fine

  20. Bench test after bonding • No frequency shift during bonding/brazing

  21. Bench test after tuning • Tune to 11.424GHz@30℃ • Good results in final test

  22. Geometry of G2.1 choke r5 r5 d2 g23 d3 3xr1 r7 c3 c2 r_endpipe r4 r8 d23 b_end b tx3 b_in b_coup ebx3 a_in a_end a a r3 d1 c1 d_in d d-t/2 r2

  23. RF performance of G2.1 choke • G2.1 choke-mode cavity needs more input power 10MW input power for full structure

  24. Manufacture of 1C-SW-A3.75-T2.6-G2.1-CHOKE • Almost keep same configuration as last two cavities’ design • Diffusion bonding in Tsinghua University

  25. Future work • High power test coming soon at Nextef in KEK • NextBuilding TD24-choke Choke-Gap-1.68 No-Choke Choke-Gap-2.10

  26. Metallic X-band Power Extractor At 11.7GHz for RF power extraction at Argonne Wakefield Accelerator Disk-loaded strucure

  27. A X-band (Copper) Power Extractor for ANL disks brazing. (no HOM damping) mode-launcher

  28. C3 structure at 11.7GHz • Design at ANL, 3 regular cells + 2 matching cells • Brazing design

  29. Setup at Argonne Drive off Drive Beam RF Drive on Higher energy Witness Beam Courtesy: Jing, Chunguang

  30. Tsinghua Thomson-Scattering X-ray

  31. TTX linac upgrade proposal 1.5m x30MV/m 1~2 year 50MW 3~5 year 1.5m x 30MV/m + 2 x 0.6m x 75MV/m Replace 3-meter with 1.5-meter x 30MV/m Add X-band to the enerty ~150MeV

  32. X-band structure design, Preliminary Will be refined with the info of RF power source available. Eacc MV/m @ 50MW # of cells

  33. Progress • Ordered • 50MW CPI 11.424GHz Klystron • Scandinova solid state modulator X-box2 50 MW Klystron Vacuum controllers RF Pulse compressor 430 kV modulator LLRF

  34. Summary • T24_THU_#1 successfully assembled and tested • Discussion: 1) baking 2) careful handling/cleaning • Choke-mode damped structures, SW single-cell test • Bonding test with same contact area at each joint • Machining accuracy from RF check: 10um • Gap1.68, Gap2.1 To be high-power tested @ KEK • TD24-choke in the pipeline • X-band application for Thomson scattering Source

  35. Thank you!

More Related