1 / 15

Introduction to CLIC accelerator development: high-power and high-gradient at X-band

Introduction to CLIC accelerator development: high-power and high-gradient at X-band. What is CLIC?. A highly developed concept, design and hardware study for a collider capable of delivering e + e - physics in the energy decade of 0.3 to 3 TeV – the lepton physics compliment to the LHC.

grace
Download Presentation

Introduction to CLIC accelerator development: high-power and high-gradient at X-band

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to CLIC accelerator development: high-power and high-gradient at X-band

  2. What is CLIC? A highly developed concept, design and hardware study for a collider capable of delivering e+e- physics in the energy decade of 0.3 to 3 TeV– the lepton physics compliment to the LHC. 500 GeVc.m. 1.5 TeVc.m. 3TeV c.m. CLIC multi-lateral collaboration - 44 Institutes from 22 countries

  3. Primary accelerator features Reach the high end of the energy range through high, 100 MV/m, accelerating gradient by using short-pulse, around 200 ns, normal-conducting rf. Deal with the resulting high peak power requirement by going to high rf frequency, X-band, produced by the so-called drive beam scheme. At the lowest energies it is also possible to use klystron/rf pulse compressor units. Accelerating structure input powers are around 60 MW. Deal with the luminosity and resulting high average power requirement by producing, transporting and colliding low-emittance, multi-bunch beams. This requires high-performance damping rings, micron-level main-linac precision and alignment, accelerating structure higher-order-mode damping, nanometer-level main-linac quadrupole stabilization and a sub-nm stabilized final focus etc.

  4. The physics and accelerator studies of CLIC have been documented in a CDR which was released last year: In addition a shorter overview document was submitted as input to the European Strategy update, available at: http://arxiv.org/pdf/1208.1402v1

  5. The focus of this talk I will now to run through the high-power, high-gradient, high-frequency, high-precision technology we have developed for the CLIC study (and up until some years ago by the NLC/JLC studies) - and introduce - our relation with industry - and - our efforts to help apply this technology to other projects - and - our efforts to provide formal collaborative structures and funding to promote our technology. Projects CLIC Industry

  6. Accelerating gradients achieved in tests. Status: 4-9-2012 HOM damped

  7. How we got there: High-power design laws The functions which, along with surface electric and magnetic field (pulsed surface heating), give the high-gradient performance of the structures are: Es/Ea global power flow local complex power flow New local field quantity describing the high gradient limit of accelerating structures. A. Grudiev, S. Calatroni, W. Wuensch (CERN). 2009. 9 pp. Published in Phys.Rev.ST Accel.Beams 12 (2009) 102001 Hs/Ea Sc/Ea2

  8. How we got there: heat treatment and material structure TD18#3 at SLAC TD18#2 at KEK Attempting to understand why it works. Stacking disks Temperature treatment for high-gradient developed by NLC/JLC

  9. Micron precision turning and milling • Accelerating structure tolerances drive transverse wakefields and off-axis rf induced kicks which in turn leads to emittance growth – micron tolerances required. • Multi-bunch trains require higher-order-mode wakefield suppression – cells require milled features. • High-speed diamond machining also seems to be beneficial for high-gradient performance through minimizing induced surface stresses. Development done “in industry”

  10. Power production using PETS and two-beam acceleration CLIC Nominal, unloaded Drive beam ON CLIC Nominal, loaded Drive beam OFF

  11. High-gradient testing using klystrons • In order to test enough accelerating structures we have an on-going campaign to establish a number of klystron-based test stands. • We have received an XL-5 klystron from SLAC from a batch order from SLAC and have an order out with CPI for two more. • A side benefit is that these test stands, with accelerating structures, turn out to be very close to the rf units one could use for: • an entry energy CLIC • a normal conducting FEL linac • a Compton-source linac • a medical linac • We wish to advance mutually beneficial work with these types of projects, and we hope today helps.

  12. Klystron-based test stands for CLIC NEXTEF at KEK XBox1 at CERN ASTA at SLAC? XBox2 at CERN

  13. Two paths for test stands and linac power units 50-75 MW tubes NEXTEF, Xboxes 1 and 2 Potentially 100 Hz range linacs in the 8-9 GeV range. 7-10 MW tubes combined Xbox3 Potentially kHz range linacs in the 1-2 GeV range. Industrial supply is crucial!

  14. Forming a community HG2013 International Workshop on Breakdown Science and High Gradient Technology HG2012 at KEK ICTP, Adriatico Guesthouse, Kastler Lecture Hall Trieste, Italy 3-6 June 2013 https://indico.cern.ch/conferenceDisplay.py?ovw=True&confId=208932 Now in our seventh year. Focus steadily expanding to include broad high-gradient normal-conducting rf community. http://indico.cern.ch/conferenceDisplay.py?confId=231116

  15. Last slide …with CLIC technology! Your project…

More Related