1 / 28

Introduction to 85108A Pulsed Network Analyzers

Outline. What is measurement?What is 85108 Pulsed Network Analyzer?What are the Connectors

michael
Download Presentation

Introduction to 85108A Pulsed Network Analyzers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Introduction to 85108A Pulsed Network Analyzers Pengcheng Jia Dec 13, 2001

    2. Outline What is measurement? What is 85108 Pulsed Network Analyzer? What are the Connectors & Cables? What are the Calibration Kits? What is Non-Insertable Calibration? How to do Pulsed Measurement? How to Control by Computer?

    3. What is measurement Define Measurement: f, P, T, expected values and tolerance. Define System Configuration Configure Hardware: User setting, Gauging, Always use ESD Protection Check Hardware: DUT, Cables, Connectors Calibrate Verify Measure Analyze and Archive

    4. Measure S Parameters

    5. 85108A System Configuration

    6. System Cabling Diagram

    7. 85110A Test Set Signal Flow

    8. Simplified NA - 8722D

    9. Difference: 85108A—8722D

    10. Avoid Large Time Delay of DUT

    11. Pulse Meas.- Freq Domain

    12. Pulse Meas.-Time Domain

    13. High Power Meas.

    14. Connectors for NA

    15. Cables for NA

    16. Cautions:

    17. Load Configuration Disk Load the Test Set Configuration Disk for 85110A with H60/61 option (Disks are stored in Drawers, never remove them) Disk->Storage is Internal Load->More->Machine Dump MD_1_20_NP, 1-20 GHz, Non-Pulsed MD_1_20_PL, 1-20 GHz, Pulsed MD_6_50_NP, 6-50 GHz, Non-Pulsed MD_6_50_NP, 6-50 GHz, Pulsed

    18. Calibration Procedure

    19. Error Model for Full 2-Port Cal

    20. Calibration Non-Insertable DUT

    21. Swap Equal Adaptors

    22. Adaptor Removal

    23. Calibration with On-Wafer Kit

    24. How to do Pulsed Meas.(1)

    25. How to do Pulsed Meas.(2)

    26. How to do Pulsed Meas.(3)

    27. How to do Pulsed Meas.(4)

    28. Computer Control

More Related