1 / 18

Bouchra RAHIM(rahim@cnrst.ma) Joint EPIKH/EUMEDGRID-Support Event in Rabat Morocco, 30.05.2011

gLite UI Installation. Bouchra RAHIM(rahim@cnrst.ma) Joint EPIKH/EUMEDGRID-Support Event in Rabat Morocco, 30.05.2011. gLite UI. The access point to the glite Grid is the User Interface This can be any machine where users have an account and where their user certificate is installed

mea
Download Presentation

Bouchra RAHIM(rahim@cnrst.ma) Joint EPIKH/EUMEDGRID-Support Event in Rabat Morocco, 30.05.2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. gLite UI Installation Bouchra RAHIM(rahim@cnrst.ma) Joint EPIKH/EUMEDGRID-Support Event in Rabat Morocco, 30.05.2011

  2. gLite UI • The access point to the glite Grid is the User Interface • This can be any machine where users have an account and where their user certificate is installed • From a UI, a user can be authenticated and authorized to use the glite Grid resources • It provides CLI tools to perform some basic Grid operations: • list all the resources suitable to execute a given job; • submit jobs for execution; • cancel jobs; • retrieve the output of finished jobs; • show the status of submitted jobs; • retrieve the logging and bookkeeping information of jobs; • copy, replicate and delete files from the Grid; • retrieve the status of different resources from the Inforamtion System 2

  3. Preliminaries • The instructions provided in this presentation assume that you are going to use a machine with Scientific Linux 5.4 installed. • Virtual Machine image (GILDA VM Base_SLC5.4_x86_64) available at:https://gilda.ct.infn.it/VirtualServices.html 3

  4. Preliminaries Login as root@pcxx.magrid.ma XX = 01, 02, 03, ….., 28 Password: grid2011 Preliminaries

  5. System requirements • Check if exists the ntp service otherwise install that: yum install ntp • Check that public machine name is NOT an alias for “localhost”, but appears on a line by its own, like in the following: • Please check: • If you have a valid hostname • To verify, type: hostname -f • To edit the hostname: • Disable Selinux: make sure /etc/selinux/config contains line: • REBOOT your server, for changes to take effect • root# cat /etc/hosts 213.92.16.191 servername.some.domain.org servername 127.0.0.1 localhost.localdomainlocalhost • vim /etc/hostname • vim /etc/sysconfig/network • hostname <pc_name> • service network restart • SELINUX=disabled 5

  6. System requirements (2/2) • Disable automatic yum update: • chkconfig yum off ; service yum stop • Similarly disable other useless services (sendmail, pcmcia, isdn,...): see for example http://wiki.eumedgrid.eu/twiki/bin/view/InfrastructureStatus/SiteSecurityAndPerformance • Cleanup yum cache: • yum clean all • Download list of important packages from CIC portal, https://cic.gridops.org/index.php?section=vo&vo=eumed see section “Other requirements” and save to a file, then issue command: • cat <file.txt> | xargs -i yum -y install {} 6

  7. Repository settings • Specify the mrepo host: export MREPO=http://repo.magrid.ma/yumrepo/glite32 • Configure the repository as follows: REPOS="dag glite-GENERIC lcg-CA glite-UI" • Get repositories with: for name in $REPOS; do wget $MREPO/$name.repo -O /etc/yum.repos.d/$name.repo; done • Install CAs (this need to be done for ANY profile): yum install lcg-CA ca-policy-egi-core ca-policy-lcg 7

  8. YUM install • Glite UI Metapackage installation: yum groupinstall glite-UI • we use groupinstall command to install all the packages for the glite-UI group of packages, read from the comps.xml file on the repo server. • glite-UI: all the software needed to install and run a gLite User Interface, yaim-utilities for the configuration of the UI, libraries, and all the CLI tools to interact with the gLite Grid services. 8

  9. site-info.def • All the configuration samples files are located in /opt/glite/yaim/examples/siteinfo directory • it’s better to make a copy of the original files • Open your own site-info.def and customize it: mkdir/opt/glite/yaim/etc/siteinfo/ cp /opt/glite/yaim/examples/siteinfo/site-info.def /opt/glite/yaim/etc/siteinfo/site-info.def vi/opt/glite/yaim/etc/siteinfo/site-info.def 9

  10. EUMED Settings - Setup site-info.def https://twiki.cern.ch/twiki/bin/view/LCG/Site-info_configuration_variables#UI BDII_HOST=bdii.eumedgrid.eu (or your own if you have one) WMS_HOST=wms-01.eumedgrid.eu (or your own if you have one) LB_HOST=wms-01.eumedgrid.eu (or your own if you have one) PX_HOST=myproxy.ct.infn.it LFC_HOST=lfc.ulakbim.gov.tr (or your own if you have one) DPM_HOST=torik1.ulakbim.gov.tr (or your own if you have one) 10

  11. Add EUMED Settings VOS="eumed" Add eumed here VO_EUMED_SW_DIR=$VO_SW_DIR/eumed VO_EUMED_DEFAULT_SE=$SE_HOST VO_EUMED_STORAGE_DIR=$CLASSIC_STORAGE_DIR/eumed VO_EUMED_VOMS_SERVERS="'vomss://voms2.cnaf.infn.it:8443/voms/eumed?/eumed' 'vomss://voms-02.pd.infn.it:8443/voms/eumed?/eumed'" VO_EUMED_VOMSES="'eumed voms2.cnaf.infn.it 15016 /C=IT/O=INFN/OU=Host/L=CNAF/CN=voms2.cnaf.infn.it eumed' 'eumed voms-02.pd.infn.it 15016 /C=IT/O=INFN/OU=Host/L=Padova/CN=voms-02.pd.infn.it eumed'" VO_EUMED_VOMS_CA_DN="'/C=IT/O=INFN/CN=INFN CA' '/C=IT/O=INFN/CN=INFN CA'" VO_EUMED_WMS_HOSTS="wms-4.dir.garr.it wms.ulakbim.gov.tr wms-01.eumedgrid.eu wms.grid.arn.dz rb-eugrid.eri.sci.eg“ !Make sure to comment VO_<vo_name>... 11

  12. Add EUMED Settings-users • Add following lines to users.conf file pointed to by variable USERS_CONF in your siteinfo.def file • 3101:eumed001:2418:eumed:eumed:: • 3102:eumed002:2418:eumed:eumed:: • 3103:eumed003:2418:eumed:eumed:: • 3104:eumed004:2418:eumed:eumed:: • 3105:eumed005:2418:eumed:eumed:: • ….. • 3201:sgmeumed001:2419,2418:sgmeumed,eumed:eumed:sgm: • 3202:sgmeumed002:2419,2418:sgmeumed,eumed:eumed:sgm: • 3203:sgmeumed003:2419,2418:sgmeumed,eumed:eumed:sgm: Seeftp://repo.magrid.ma/pub/GridSchoolConfFiles/ Location, Meeting title, dd.mm.yyyy 12

  13. Add EUMED Settings-groups • Add following lines to groups file pointed to by variable GROUPS_CONF in your site-info.def • "/eumed/ROLE=SoftwareManager":::sgm: • “/eumed":::: • See ftp://repo.magrid.ma/pub/GridSchoolConfFiles/ Location, Meeting title, dd.mm.yyyy 13

  14. Configuring UI • Update the date (ftp://repo.magrid.ma/pub/GridSchoolConfFiles/) configure ntp : /etc/ntp.conf , /etc/ntp/step-tickers /etc/init.d/ntpd stop ntpdate ntp.marwan.ma /etc/init.d/ntpd start • Disableiptables • service iptables stop • Chkconfigiptables off • Configure the UI with YAIM (To check the syntax : source <path_to_siteinfo>/site-info.def ) /opt/glite/yaim/bin/yaim -c -s <path_to_siteinfo>/site-info.def -n glite-UI • If everything is ok, the UI is now READY for testingYAIM does not configure the LFC_HOST variable; please edit the file /opt/glite/etc/profile.d/grid-env.sh and add the following for eumed: gridenv_set "LFC_HOST" "lfc.ulakbim.gov.tr" 14

  15. Testing UI [root@pc01 ~]# adduser grid01 • [root@pc01 ~]# mkdir /home/grid01/.globus [root@pc01 ~]# cp /root/user_cert/usercert.pem /home/grid01/.globus/usercert.pem [root@pc01 ~]# cp /root/user_cert/userkey.pem /home/grid01/.globus/userkey.pem [root@pc01 ~]# chown grid01 /home/grid01/.globus/usercert.pem [root@pc01 ~]# chown grid01 /home/grid01/.globus/userkey.pem [root@pc01 ~]# chmod 400 /home/grid01/.globus/userkey.pem [root@pc01 ~]# su – grid01 [grid01@pc01 ~]$ voms-proxy-init --voms eumed Enter GRID pass phrase: [grid2011] Your identity: /C=MA/O=MaGrid/OU=CNRST/CN=Grid School Creating temporary proxy ................................................................. ....................................... Done Contacting voms2.cnaf.infn.it:15016 [/C=IT/O=INFN/OU=Host/L=CNAF/CN=voms2.cnaf.infn.it] "eumed" Done Creating proxy ........................................................................................ Done Your proxy is valid until Sun May 29 04:25:35 2011 15

  16. Testing UI for GILDA • OtherTests: Copy a jdl file: Password [grid01] Submit a job: lfc-ls /grid scp grid01@ui01.magrid.ma:/home/grid01/hostname.jdl . glite-wms-job-submit -a –o jobid hostname.jdl 16

  17. Testing UI for EUMED Installation • For the real installation you have to export you personal certificate from web browser to the UI and than have a look at the following: ATTENTION USE eumed INSTEAD gilda • Certificate management: https://grid.ct.infn.it/twiki/bin/view/GILDA/HowToConvertPkcs12ToPem • Voms creation with extentions https://grid.ct.infn.it/twiki/bin/view/GILDA/AuthenticationAuthorization#Creation_of_a_proxy_with_voms_ex • Job Submission https://grid.ct.infn.it/twiki/bin/view/GILDA/SimpleJobSubmission • Data Management https://grid.ct.infn.it/twiki/bin/view/GILDA/DataManagement 17

  18. References • INFNGrid installation http://igrelease.forge.cnaf.infn.it/doku.php?id=doc:guides:install-3_2 • EUMED wiki for system administrators: http://wiki.eumedgrid.eu/twiki/bin/view/InfrastructureStatus/EumedSiteInstallation 18

More Related