1 / 19

ARDEC

ARDEC. PROBLEM ANALYSIS & TESTING A COURSE BY RONALD ELBE Presenting: JOHN KUHN CONFIGURATION MANAGEMENT & LIFECYCLE INTEGRATION COMPENTENCY DIRECTORATE NDIA PRESENTATION MAY, 2003. John.F.Kuhn@us.army.mil DSN 793-3924 Comm: (309) 782-3924. DISCLAIMER.

luke
Download Presentation

ARDEC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ARDEC PROBLEM ANALYSIS & TESTING A COURSE BY RONALD ELBE Presenting: JOHN KUHN CONFIGURATION MANAGEMENT & LIFECYCLE INTEGRATION COMPENTENCY DIRECTORATE NDIA PRESENTATION MAY, 2003 John.F.Kuhn@us.army.mil DSN 793-3924 Comm: (309) 782-3924

  2. DISCLAIMER • NOT AN OFFICIAL U.S. ARMY POSITION • CONTENT SOLELY OPINION & RESPONSIBILITY OF RON ELBE • SPIN BY JOHN KUHN Committed to Excellence 2

  3. COURSE TOPICS • SKILLS & KNOWLEDGE NEEDED • TEN STEPS IN PROBLEM ANALYSIS • IF TESTING IS NEEDED • • • • TYPICAL SYSTEM TRADE-OFFs • HELPFUL HINTS FROM THOSE WITH EXPERIENCE Committed to Excellence 3

  4. SKILLS & KNOWLEDGE NEEDED • FIRST PRIORITY – LOGIC & COMMON SENSE • DEDUCTIVE REASONING (SHERLOCK HOLMES) • KEEN OBSERVATION • UNDERSTANDING OF THE WHOLE SYSTEM (WEAPON, AMMO, MOUNT, ETC) • 8 STEPS IN CYCLING OF WEAPON SYSTEM Committed to Excellence 4

  5. TEN STEPS IN PROBLEM ANALYSIS • DEFINE PROBLEM • IDENTIFY ALL POTENTIAL CAUSES • DETERMINE METHOD(S) OF ANALYSIS • DETERMINE DATA NEEDED FOR ANALYSIS • SPECIFY SOURCES / EQUIPMENT NEEDED TO OBTAIN DATA • OBTAIN DATA • ANALYZE DATA • DRAW CONCLUSIONS • MAKE RECOMMENDATIONS / TAKE CORRECTIVE ACTIONS X. DOCUMENT ENTIRE ANALYSIS Committed to Excellence 5

  6. DEFINE THE PROBLEM / ISSUE • LACK OF DEFINITION IS MAJOR FAILURE •• CAN’T GIVE “CORRECT ANSWER” TO “WRONG QUESTION” • BE SPECIFIC Committed to Excellence 6

  7. CONSIDER ALL POSSIBLE CAUSES • WEAPON •• ESPECIALLY MAGAZINES • AMMO •• CARTRIDGES •• LINKS, PACKAGING, STRIPPER CLIPS, AMMO CANS • WEAPON / AMMO INTERFACE • ANCILLARY DEVICES •• BLANK FIRING DEVICES •• TRIPODS / MOUNTS •• FEED CHUTES Committed to Excellence 7

  8. CONSIDER ALL POSSIBLE CAUSES (CONTINUED) • TEST EQUIPMENT • MAINTENANCE •• INTERVALS •• EQUIPMENT • ENVIRONMENT •• STORAGE •• USE • USER •• MAN-MACHINE INTERFACE •• UNANTICIPATED / UNAUTHORIZED USE • RANDOM CHANCE • ? ? ? Committed to Excellence 8

  9. PRIORITIZE POSSIBLE CAUSES • ELIMINATE THOSE NOT POSSIBLE • PRIORITIZE / RANK THOSE REMAINING • BE EFFICIENT WITH RESOURCES •• DO CHEAP, EASY INVESTIGATIONS FIRST • CONSIDER 2 PHASE TESTING •• PART I – QUICK & DIRTY •• PART II – DETAILED & CONTROLLED Committed to Excellence 9

  10. FACTS / DATA / INFO NEEDED • DETERMINE FACTS / DATA / INFORMATION NEEDED TO ISOLATE CAUSE / PROBLEM • MUST BE ABLE TO ISOLATE EACH POTENTIAL CAUSE ! ! ! • BE SPECIFIC •• NOT ACCURACY •• AVERAGE EXTREME SPREAD OF 3 – 10 SHOT GROUPS @ 100 YARDS •• DOWN TO “FORM & FORMAT” Committed to Excellence 10

  11. FACTS / DATA / INFO SOURCES • POTENTIAL SOURCES •• ENGINEERING JUDGEMENT & COMMON SENSE •• HISTORICAL REFERENCES •• INCLUDING SIMILAR OR OLDER SYSTEMS •• MATHEMATICAL ANALYSIS •• MODELING/SIMULATION/STRESS ANALYSIS, ETC. •• FIRING TESTS • SELECT SOURCE(S) BASED ON: •• TIME & COST EFFICIENCY •• “SURENESS” OF DECISION • BALANCE COST VS RISK / VALUE Committed to Excellence 11

  12. ASSURE THAT TEST ISOLATES POTENTIAL CAUSES • CONTROLS ! CONTROLS ! CONTROLS ! •• PROVIDES DIRECT, REAL-TIME COMPARISONS •• ELIMINATES MANY VARIABLES •• CONTROL GUNS, CONTROL AMMO, CONTROL EQUIPMENT • USE “RANDOMNESS” TO ISOLATE CAUSE • ALL TEST EQUIPMENT MUST: •• NOT INFLUENCE / MASK TEST RESULTS •• BE SPECIFICALLY IDENTIFIED •• BE INSPECTED / CALIBRATED / CONFORMING (IN A “GUN TEST”, AMMO IS TEST EQUIPMENT ! ! !) • TEST MUST REFLECT “ALL FIELDED ASSETS” Committed to Excellence 12

  13. ANALYZE THE DATA • FROM ALL SOURCES • MUST ISOLATE ALL POSSIBLE CAUSES • HOW DATA IS ANALYZED IS AS IMPORTANT AS DATA ITSELF Committed to Excellence 13

  14. DRAW CONCLUSIONS • ARE THEY TOTALLY SUPPORTABLE? • ARE THEY UNBIASED? Committed to Excellence 14

  15. RECOMMENDATIONS AND CORRECTIVE ACTIONS • CONSIDER ALTERNATIVE SOLUTIONS • IF YOU’VE DONE THOROUGH WORK, THESE ARE SELF-EVIDENT • CONSIDER LOGISTIC & ACQUISITION IMPLICATIONS OF ALTERNATIVES Committed to Excellence 15

  16. RECORD IT • PREPARE FORMAL TECH REPORT •• MAKES ANALYSIS & ITS DATA PERMANENTLY AVAILABLE •• FAME & GLORY FOR YOU • RECORD ALL PERTINENT DATA / INFO •• MAKES TEST EXACTLY REPEATABLE •• SERVES AS CONTROL FOR FUTURE TESTS • DTIC •• WWW.DTIC.MIL Committed to Excellence 16

  17. HELPFUL HINTS FROM OLD GUYS • DEFINE THE PROBLEM BEFORE BEGINNING THE ANALYSIS. • MEASURE & DOCUMENT THE SYSTEM BEFORE & AFTER TEST. • MANY PROBLEMS ARE CYCLICAL. •• ASK THE OLD GUYS. •• CHECK HISTORICAL REFERENCES • TEST ENOUGH SYSTEMS TO GET STATISTICALLY VALID RESULTS • BE SUSPICIOUS OF THE SUPPLY SYSTEM •• MULTIPLE VENDORS •• MULTIPLE CONTRACTS •• “STANDARDIZATION” ACTIONS Committed to Excellence 17

  18. HELPFUL HINTS FROM OLD GUYS • DON’T TRUST INPUT FROM: •• CONTRACTORS •• DCAS •• THE FIELD • DON’T RUSH A PROBLEM ANALYSIS. DO IT RIGHT! • DON’T LET CONTRACTOR, MANAGEMENT, OR A CONGRESSMAN SKEW YOUR TEST SET-UP OR ANALYSIS • DON’T EXPECT USERS TO UNDERSTAND SYSTEM OR EXPLAIN PROBLEM • YOU WILL NEVER GET ON APG’S SCHEDULE (PLAN AHEAD) • “LITTLE THINGS (SURFACE FINISH, WORKMANSHIP, LUBRICATION, RADII) ARE IMPORTANT Committed to Excellence 18

  19. HELPFUL HINTS FROM OLD GUYS • SCANNING ELECTRON BEAM MICROSCOPE FOR CHEMISTRY & LUBRICANTS • A FIRING TEST SHOULD BE THE LAST RESORT • CATEGORIES OF FIELD PROBLEMS •• DESIGN RELATED •• QUALITY RELATED •• MAINTENANCE RELATED •• USE / ABUSE RELATED • ONE HIGH SPEED VIDEO IS BETTER THAN 10,000 ROUNDS FIRED • ONE TIME-DISPLACEMENT CURVE IS BETTER THAN 100,000 ROUNDS FIRED • FINALIZE TEST PLAN BEFORE FIRING • DEFINE PASS / FAIL BEFORE FIRING Committed to Excellence 19

More Related