INDEX

2. INDEX • PC RECOMMNENDATION • THE MEANING OF ARAMO-SG • ARAMO-SG COMPONENTS • SOFTWARE INSTALLATION • HARDWARE INSTALLATION • ARAMO-SG FEATURE • TRIPLE MODE IMAGES • ARMO-SG & SKIN XP PRO FUNCTION • SKIN DIAGNOSIS STEP • MOISTURE & ELASTICITY ANALYSIS • OIL ANALYSIS • EVENNESS ANALYSIS • PORE ANALYSIS • SPOT ANALYSIS • SENSITIVITY ANALYSIS • WRINKLE ANALYSIS • CONCLUSION • IMAGE MANAGEMENT • VIEW • INTRODUCTION • CONFIG SETTING • ARAMO-SG DIMENSION • FAQ

3. PC RECOMMENDATION • Best recommend: • CPU: over P4 1.4GHz • Memory: over 512MB RAM • USB: 2.0 supportable (over 2 ports) • CD Rom drive • Over DirectX 9.0C • Not Recommended VGA (Video Graphic Adaptor) • S3 Unichrome • Via Unichrome • Unichrome pro • Not Recommended Main Board Chipset • SIS • NVIDIA • ATI

4. MEANING OF ARAMO-SG Small & Great • Aramo-SG is a compact size camera with excellent functions. • Aramo-SG and skin program allow you to measure moisture, sebum, evenness, spot, pore, sensitiveness and wrinkle of your skin. • Aramo-SG is a powerful diagnosis system which attracts customers attention and leads you much benefits by proper recommendation. That reason why, it’s called SG!!!

5. ARAMO-SG COMPONENTS l X10 lens (Wrinkle) X60 Triple lens (normal hair & normal skin, polarizing) DC 5V adaptor X1 lens Main Power Switch USB Cable (PC ↔Aramo SG) Moisture Checker RCA Cable Oil Stick Oil Tape

6. ARAMO-SG COMPONENTS ll Aramo SG Full set Main Camera X1 Lens X60 Triple lens – normal hair, normal skin, polarizing mode (Sebum, Evenness, Pore, Spot, Sensitivity) X10 lens (Wrinkle) Oil stick & Oil tape (10packs/10pcs in one pack) Moisture Checker DC 5 V adaptor USB Cable RCA (Radio Corporation of America) cables Holder

7. SOFTWARE INSTALLATION 2 1 Please insert SKIN XP PRO CD. Then the program will be installed automatically. 4 3 5 Please, make sure that S/W should be installed first. Please restart the computer.

8. HARDWARE INSTALLATION l Connect Aramo SG to computer by using USB cable or connect to TV monitor by using RCA cable like the following feature.

9. HARDWARE INSTALLATION ll * Please, be sure that this System is available on the computers support USB 2.0 ONLY. USB 2860 device USB PVR TV-Device The above steps will be proceeded consequently when Aramo SG has been connected to the computer through USB port connection. Press ‘Continue Anyway’ when the right window is pop up. 1 2 1-1. Then, the above screen will pop up. Press “Next” Button. 1-2. Installing… 3 4 1-3. Press “Continue” Button. 1-4. Installing Video Adaptor Driver.

10. HARDWARE INSTALLATION lll 5 6 1-5. H/W Driver has been installed completely. Press “Finish” Button. USB PVR TV-Device 2860 device Please, check this device status on Device Manager like the above after full installation.

11. ARAMO-SG FEATURE Please be sure to check which TV monitor you are using. ARAMO SG standard type is NTSC type, if you want to have PAL type you need to make the special order.

12. TRIPLE MODE IMAGES Normal 1 Normal 2 Polarizing • With Normal 1 mode you can see the oil of the skin. • With Normal 2 mode you can see the keratin and black head of you skin. • With Polarizing mode you can see the spot & pigmentation. These 3 images are the same area of the skin which is captured by 3 different mode of X60 lens. Normal 1 Polarizing Normal 2

13. SKIN XP PRO FUNCTION • SEBUM ANALYSIS  X60 NORMAL LENS WITH SEBUM TAPE • PORE SIZE ANALYSIS  X60 NORMAL LENS • EVENNESS ANALYSIS  X60 NORMAL LENS • SPOT ANALYSIS  X60 POLARIZING LENS • SENSITIVITY ANALYSIS  X60 POLARIZING LENS WITH QUESTIONNAIRE • WRINKLE ANALYSIS  X10 LENS • MOISTURE ANALYSIS  WITH MOISTURE CHECKER

14. SKIN DIAGNOSIS STEP

15. 0. CLIENT MANAGEMENT 1 3 2 4 Client information would be input here. This screen comes out when pressing “Register” Button in the left column. 5 1. Client Management - Register : Register new client profile - Modify : Modify existing client profile - Delete : Delete existing client profile & All the diagnosis data of the client - Client list : View all client profile and Search 2. Image Management Record all diagnosis images scanned by X60 Normal / Polarizing, Wrinkle according to the diagnosis steps. Tester can compare the current diagnosis image with previous one taken the other day. Those diagnosis images cannot be deleted or modified. Also, tester can take pictures with scope camera and save them with Description here. 3. It shows client’s face photo. It can be recorded or modified at the “Register” or “Modify” Button. 4. Start Diagnosis 5. Finish Diagnosis. It moves to the First Page, Main Page.

16. 1. MOISTURE & ELASTICITY • Place the Moisture Sensor on the cheek of face. Then, register the mark in the moisture session using arrow button. • The animation at right upper corner shows where to measure. • The standard data per age group can be referred in using drop-down list button. • Click Elasticity button to measure elasticity. • Mark each answer to the question and close. • The elasticity value will be shown according to the answers to the questions to check elasticity condition.

17. LCD screen Power switch [EX] First check Reset Retrial MOISTURE SENSOR USER GUIDE • Switch on the power. • Gently wipe the surface of the sensor with a tissue. • Wait until the display shows a constant “0.0%” and beep sound is heard. The moisture sensor is now ready to take a reading. After 5 minutes later the moisture sensor will be turned off if you are not using. (Auto sleeping mode) • Press the sensor onto you’re the skin perpendicularly, and then wait 2~3 second until the beep sound is heard. You will see the result on the LCD screen. After getting a result you will heard one more beep sound which means the sensor is ready to read another time. Warning : Without hearing beep sound you can’t re-check!! • Once get the result, the value will remain on the LCD screen until the sensor is off. For the retrial please press gently the sensor onto your skin, you will get the mark “00.0%” which means the sensor is ready for retrial. • Replacing the batteries • Open the battery compartment cover by pulling back and up on the cover release. • Place two new AAA batteries in the compartment, taking care to orient the batteries according to the indication in the compartment. • Re-place the battery compartment cover.

18. 2. OIL ANALYSIS • Press onto your face at U-Zone (see also the below illustrate) for 5 seconds. • Then scan the pink side with camera (normal mode) within 3 seconds from sebum extraction with X60 Normal Lens. • After that, click Analysis button. Do it for T-zone as the same way. This will determine your Skin Type. Note: When the whole (or over 50%) pink side of oil tape soaked up the sebum and turned red, camera doesn’t recognize because of auto-balance function.

19. 3. EVENNESS ANALYSIS Note : Wipe out sebum and makeup on client’s skin with oil blotting paper after Moisture, Elasticity & Sebum check. This will help to see client’s skin clearly such as keratins, spots, pores and texture, etc. Be sure that it should not be done before Moisture, Elasticity & Sebum check. • Scan the skin X60 Normal Lens Blue as the left upper animation indicate. Then, capture the skin image. • Click Analysis button. • The numeric mark and fluctuation graph comes out as the result. • The fluctuating graph means sectional diagram of skin. Going-up means keratin flake, hair or pimple and Coming-down means pore and fine lines of skin network.

20. 4. PORE ANALYSIS • Click Analysis button. • The numeric mark comes out as the result. • Comparison is available with the sample images. • Various type of skin can be shown for the comparison in using drop-down list button. • This function helps to learn where the client’s skin condition is.

21. 0 20 40 60 80 5. SPOT ANALYSIS l • Scan the skin X60 TPL Lens (Orange) around eyes and mouth or any place which has pigments or internal pigments. • Click Analysis button. • The numeric mark and red spots comes out as the result. • Measure several times to get the average value. Automatically program shows the latest value. • Then, mark the spot level. Each level has its mark and the result shows the average between auto analysis value and spot level value.

22. 5. SPOT ANALYSIS ll • Click Comparison button to compare client’s pigments type with others in the sample database. • Various type of spots can be shown for the comparison in using drop-down list button. • This function helps to learn where the client’s skin condition is.

23. 6 . SENSITIVITY ANALYSIS l • Click Check Up button to learn client’s sensitivity index. Then, ask each question and mark on it.

24. 6. SENSITIVITY ANALYSIS ll • Click Capture button to activate the camera. • Examine others like keratin, pimple, capillary, etc with X60 TPL Lens (Orange) under polarizing mode. Polarizing mode helps to see inside of skin. • Then, click Compare button to show other cases. • After examination, mark in the ETC session.

25. 7. WRINKLE ANALYSIS Be sure not measuring hair or dark spots. No matter how many times it’s measured, the highest mark is remained as the final result. To reset the highest mark, click “Reset” button. 1 2 3 4 5 • Capture the place to be measured (around eyes or mouth) with Wrinkle Lens. • Choose the area to be analyzed in moving the translucent box. • By choosing the area with left click, the depth of winkle can be measured • By choosing the area with right click, the width of winkle can be measured • Draw a line with mouse on the wrinkle to be measured. The mark will • Choose “Yes” to reflect this measured value to the result. • Measure the wrinkle thickness by using mouse dragging. Please click on the end of the edge and drag the mouse until another end of edge of wrinkle. • Please select the most similar statement of your client. Then click on OK button.

26. 8. CONCLUSION l Click Advice button to show proper care advice and product recommendation according to the analysis result. Care advice will be shown per each type and each condition according to the result. In the bottom of this page, there is Recommendation Product button. It links to customized product recommendation page. This can be printed out.

27. 8. CONCLUSION ll Click Product button to show the whole catalogue. (This can be skipped.) Advice : Return to the Care Advice Page Print : Print the current catalogue page Config : Edit Catalogue Refresh : Refresh current catalogue component after editing. Add Folder : Create New Folder (New Category) Add : Add Image File or HTML File in the current folder Delete : Delete Folder or File Rename : Rename Folder * Recommended HTML / Image Size (not showing scroll function in the screen) : 605X525 Pixels, 72 DPI or higher

28. 8. CONCLUSION lll • After diagnosis, each result would be recorded per each date. • Result Compare : Compare 2 result. This helps to show the improvement. • Delete : Delete the result record one by one. • Comment : Add extra comment. • View Result : Show the result in Graphics.

29. 9. IMAGE MANAGEMENT • Image Management After diagnosis, each diagnosed image would be recorded per each date and each title. • Import : Import image from other folder or place (other photos taken by digital camera can be recorded together under the client profile.) • New : Activate the camera to scan and record it here. • Modify : Modify the image data. (Diagnosed image cannot be modified.) • Delete : Delete the image (Diagnosed image cannot be deleted.) • Print : Recorded images can be printed out. • Compare : 2~4 recorded images can be compared. This helps to prove improvement. To compare recorded image, choose 2~4 images with mouse while pressing CTRL key, the press the right button of mouse to launch hidden menu. Then select Compare. This also can be printed out. New Print

30. 10. VIEW • This session can be applied for quick diagnostic tool by visual examination. Easily skin texture surface and the same place but deeper side can be checked. This session doesn’t provide photo recording. • 1 View : 1 Frame Screen • 2 View : 2 Frame Screen • 4 View : 4 Frame Screen • Camera with Tools : Camera setting (Brightness, Contrast, Hue, Color, Sharpness) • Camera: Activate the camera. • Pen : Write or draw on the photo screen. • Eraser : Delete all writing or drawing on the screen. • Color Pallet : Pen Color

31. 11. INTRODUCTION • This session can be applied for promotion of company, products or marketing campaign in using image slide show, animation or movies. • View : Preview of image or movie (BMP, JPG, AVI or MPEG, MPG) • Add : Add image or movie (Recommended image size is 851X586 Pixels) • Delete Selected : Delete selected file • Delete All : Delete all files settled here. • Delay Slide Show : Fix time interval during slide show.

32. 1 2 3 4 6 7 5 12. CONFIG SETTING l • This session can be used for controlling each sensitivity adjustment and care advice and product recommendation edit. • After closing SkinXP Pro program, launch SkinXPProConfig program at C:\Program Files\AramHUVIS\SkinXPPro while keeping camera connection. • NOT to change other items except ADVICE and PRODUCT is recommended. • To update product recommendation, click PRODUCT button. • Select major category : Select Weather and Intensive Item • Select minor category : Assign Skin type and other items like wrinkle, etc. • Count : Assign the product order. (1 would be shown at the top.) • Display this product : Mark the check box to reflect this in the product recommendation page. • Image : Take a picture of product or import the picture from other place or folder. • Scope - Activate the camera. Take a product picture with X1 lens. • Import - Import an product image from other place. • Name : Input Product Title • Description : Input Product Description.

33. 1 2 3 4 5 6 12. CONFIG SETTING ll • This session can be used for controlling each sensitivity adjustment and care advice and product recommendation edit. • After closing SkinXP Pro program, launch SkinXPProConfig program at C:\Program Files\AramHUVIS\SkinXPPro while keeping camera connection. • NOT to change other items except ADVICEand PRODUCT is recommended. • To update product recommendation, click PRODUCT button. • Select major category : Select Weather and Intensive Item • Select minor category : Assign Skin type and other items like wrinkle, etc. • Skin type name: named the skin type • Skin type description : Input description. • Skin management method : Assign advice order. (1 would be shown at the top.) • Description : Input Description.

34. Power Switch Capture Switch TPL Switch ARAMO-SG DIMENSION Back Top Side LENS COVER (ACYL) Front X1 LENS(OR X60LENS) USB ON/OFF LAMP Bottom UV DISINFECTION LAMP X60 LENS(OR X1LENS)

35. FAQ The UV Lamp is not working!! Inside of Main camera there is magnet for recognize whether the camera is laid or not. Hence if you don’t pause the camera the UV light would not be turned on. If you want to check whether the UV lamp is working well please cross the camera like the photo 1 as below. You will see the lamp is turned on. If you hold the camera the lamp will be turn off automatically like photo 2. UV lamp for sterilization Photo 1 Photo 2

36. Aram Huvis Co., Ltd. Byucksan Technopia 801 434-6 Sangdaewon-dong, Jungwon-gu, Sungnam-city, Korea(Republic) ☎+82 31 732 6320, FAX +82 31 732 6330 http://www.aramhuvis.com