1 / 12

SU-8 surface-micromachining process utilizing PMGI as a sacrificial material

SU-8 surface-micromachining process utilizing PMGI as a sacrificial material. 2007 IEEE MEMS G. Foulds , R. W. Johnstone M. Parameswaran. 學號 :9635517 姓名 : 陳立仁. Outline . Introduction Fabrication process Result Conclusion. Introduction. A novel process uses PMGI as

lindsay
Download Presentation

SU-8 surface-micromachining process utilizing PMGI as a sacrificial material

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SU-8 surface-micromachining process utilizing PMGI as a sacrificial material 2007 IEEE MEMS G. Foulds , R. W. Johnstone M. Parameswaran 學號:9635517 姓名:陳立仁

  2. Outline • Introduction • Fabrication process • Result • Conclusion

  3. Introduction • A novel process uses PMGI as sacrificial layer and lift-off resist for SU-8. • The whole process can be completed in a single day .

  4. Fabrication process

  5. Fabrication process (cont.)

  6. Fabrication process (cont.)

  7. Fabrication process (cont.)

  8. Result

  9. Result (cont.)

  10. Result (cont.) “Automated assembly of hingeless 90° out-of-plane microstructures,” S H Tsang, D Sameoto, I G Foulds, R W Johnstone, M parameswaran

  11. Result (cont.) “Automated assembly of hingeless 90° out-of-plane microstructures,” S H Tsang, D Sameoto, I G Foulds, R W Johnstone, M parameswaran

  12. Conclusion • An ideal process for proof of concept prototyping . • The height and thickness of the structure can be changed easily to fit different applications .

More Related