1 / 13

SCP’s Instructions

3.3.6 Competent Person. A person who is designated in writing by their employer in accordance with 29 CFR 1915.7. SCP’s Instructions.

leyna
Download Presentation

SCP’s Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 3.3.6 Competent Person. A person who is designated in writing by their employer in accordance with 29 CFR 1915.7. SCP’s Instructions The 2001 edition for the first time defined the well-established relationship between the Marine Chemist and the Shipyard Competent Person and the frequency of retesting confined spaces.

  2. 4.1 Determining Conditions The Marine Chemist shall carry out tests in each space ensuring compliance with the minimum applicable requirements. Maine Chemist -Ensures 4.5 Issuance of Certificates. .... a signature for receipt of the Certificate shall be obtained, signifying understanding of the conditions and limitations and the requirements for maintaining conditions under which it is issued. SCP - Maintains

  3. ~ Synopsis of SCP Duties ~ OSHA 1915.15Maintenance of Safe Conditions a. Isolation of piping b. Alteration of conditions c. Test to maintain conditions d. Change of conditions (marine chemist) e. Tests to maintain findings f. Change of conditions (SCP)

  4. NFPA-306 ~ Synopsis ~ 4.6.2 Maintaining the Certificate 1. Conditions shall be inspected by the SCP within 1 day. 2. Conditions shall be maintained . 3. Spaces shall be inspected daily or more often. 4. Certificates not maintained are voided. 5. Shifting must be authorized with re-inspection by SCP and nature of tests included on certificate. 6. Calibration of instruments used to maintain certificate shall be verified each day.

  5. 2009 NFPA-306: 4.6.2(3)*Unless otherwise stated on the Certificate, all spaces including adjacent spaces documented on the Marine Chemist Certificate shall be reinspected daily, or more often as necessary, by the shipyard competent person in support of work prior to entry or recommencement of work. 2014 NFPA-306 4.6.2(3)* Unless otherwise stated on the Certificate, certified spaces including spaces adjacent to hot work, where work is being done shall be re-inspected daily, or more often as necessary, by the shipyard competent person, prior to entry or external hot work. 4.6.2 Maintaining the Certificate

  6. 2014 NFPA-306 Annex to 4.6.2(3) Spaces shall be inspected daily ... The intent of this wording is to clarify that spaces listed on the Marine Chemist Certificate do not need to be tested by the competent person unless work is being done on or in a space. For example, spaces on a certificate do not need to be tested and inspected on a weekend if no work or entry is taking place. However, nothing shall prevent a competent person from testing more frequently than the minimum...

  7. Small Print “Unless otherwise stated on the Certificate, all spaces and affected adjacent spaces are to be re-inspected daily or more often as necessary by the competent person … in support of work prior to entry or recommencement of work.” “In support of work” is the spin.

  8. NAVSEA 009-35 FY-13 CH-2 3.1.3.2 For those certified spaces which employees will enter, a Competent Person shall visually inspect, test and record each space certified as ENTER WITH RESTRICTIONS or SAFE FOR WORKERS as often as necessary, and as a minimum, prior to entry by employees on a daily basis. If a space is not to be entered on any given day, it is not required to be inspected and tested by a Competent Person. The initial MCC remains valid if conditions have not changed, unless noted on the MCC. 3.1.3.3 For those certified spaces affected by hot work, a Competent Person shall visually inspect, test, and record each space certified as SAFE FOR HOT WORK as often as necessary and, as a minimum, daily prior to commencement of hot work to ensure that conditions established by the certificate are maintained. When hot work is continuous, the affected spaces shall be visually inspected, tested, and recorded on a daily basis to maintain the SAFE FOR HOT WORK certification.

  9. USCG Safety & Environmental Health Manual CH-11 8. Vessels Afloat Entry/Repair C (3) If the Competent Person has not properly maintained the Marine Chemist Certificate, the Marine Chemist is required to reissue the certificate prior to reentry into the confined space. NFPA rules require a Competent Person to reexamine the confined space at least every 24 hours or if conditions under which the certificate was issued under change.

  10. 2014 NFPA -306 Safe for Limited Hot Work: (d) In compartments/spaces on vessels, that are not considered cargo or fuel spaces and have not contained and are not subject to concentrations of combustible, flammable or toxic liquids, vapors, or gases.... The Certificate shall include a statement under the heading "Limitations" describing the locations and type of Hot Work along with any directions for the Competent Person to maintain safe work conditions. Submitted: Alan Bonds, A. Bonds Chemist, LLC - Recommendation: Revise text to read : The term “maintain” is consistent with the requirement in Section 4.5 of the Standard and with the requirement for the competent person to maintain safe conditions in 29 CFR 1915.15, Maintenance of Safe Conditions.

  11. Objective Fit these SCP requirements on a certificate. What is the proper language ?

  12. SFLHW 4.3.6.3The Certificate shall include a statement under the heading "Limitations" describing the locations and type of Hot Work along with any directions for the Competent Person to maintain safe work conditions. The Certificate shall include a statement describing limitations 1. Specific location 2. Type of hot work. 3. Permitted to list any areas to be excluded from hot work. 4. These areas shall be listed on the Certificate under “Limitations.” ~ and ~ No work will take place on the weekends Provide these directions on a certificate for limited hot work

  13. Insert proper limitations and instructions for this normally occupied space on certificate.

More Related