1 / 44

URBAN ROADS

URBAN ROADS. Scope of Urban Roads. Urban/Suburban Road Segments  continuous permanent development along all or almost of its length, on at least one side of the road. Population at least 100.000

lawson
Download Presentation

URBAN ROADS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. URBAN ROADS

  2. Scope of Urban Roads • Urban/Suburban Road Segments  continuous permanent development along all or almost of its length, on at least one side of the road. Population at least 100.000 • Interurban Road Segments  without continuous development on either side, such as restaurants, factories, or villages.

  3. Scope of Urban Roads • Urban Road Types • Two-lane two-way roads (2/2 UD) • Four-lane two-way roads • Undivided (i.e. no median) (4/2 UD) • Divided (i.e. with median) (4/2 D) • Six-lane two-way divide roads (6/2 D) • One-way roads (1-3/1)

  4. Scope of Urban Roads • Conditions: • Flat or essentially flat alignment • Straight or essentially straight horizontal alignment • On segments of roads which are not affected by queuing caused by intersections, nor by severe platooning downstream form signalised intersections

  5. Scope of Urban Roads • Road Segments: • Between and unaffected by signalised or major unsignalised intersections, and • Having similar characteristics along its length.

  6. Objective of Urban Roads • Design of urban roads should be selected with the aim to ensure that degree of saturation does not exceed an acceptable value (normally 0,75)

  7. Traffic Safety Considerations • Widening of the lane decreases the accident rates between 2-15% per meter widening (the high number refers to narrow roads). • Widening and improvement of shoulder surface conditions improves traffic safety, although to a smaller degree than lane widening

  8. Traffic Safety Considerations • A median reduces the accident rate with 30% • Median barriers (used when the space is insufficient to make a full median) reduce fatal and severe injury accidents with 10-30%, but increase damage only accidents.

  9. Urban Roads Performance Indicator • Degree of Saturation (≤ 0,75) • Level of Service (A – F) • Average Speed • Travel Time

  10. Level of Service Based on Average Speed

  11. STEP A-1: General Data • Date (day, month, year) and Handled by • Province • City name • City size (number of inhabitants) • Link number/road name • Segment between … or … • Segment code • Area type (COM, RES, RA/Frontage Road) • Length of segments • Road type (4/2 D, 4/2 UD, 2/2 UD, 2/1) • Time period • Case number

  12. STEP A-2: Geometric Conditions • Compass arrow showing North • Km-posts • Sketch of the horizontal alignment • Arrows identifying Direction 1 (North or East-bound) and Direction 2 (South or West-bound) • Names of the places • Major buildings • Intersections and entries/exits • Pavement markings

  13. STEP A-3: Traffic Conditions

  14. STEP A-3: Traffic Conditions

  15. STEP A-3: Traffic Conditions

  16. STEP A-4: Side Friction • Number of pedestrians passing along or crossing the road segment (0,5) /h,200m • Number of stopping vehicles and parking maneuvers (1,0) /h,200m • Number of motor vehicle entries and exists to/from roadside properties and side roads (0,7) /h,200m • Flow of slow-moving vehicles (bicycles, tricycles, horse-charts, oxcarts, tractors, etc. (0,4) /h

  17. Road Side Friction

  18. Road Side Friction

  19. Road Side Friction

  20. Road Side Friction

  21. STEP A-4: Side Friction

  22. STEP B-1: Analysis of Free-flow Speed • FV  free-flow speed for LV at actual conditions (kph) • FV0  Base free-flow speed for light vehicles (kph) • FVW Adjustment for effective carriageway width (km/h) • FFVSF  Adjustment factor for side friction conditions • FFVCS  Adjustment factor for city size

  23. STEP B-1: Analysis of Free-flow Speed

  24. STEP B-2: Free-flow Speed Adjustment FVW for Carriageway Width [Table B-2:1] • Four-lane divided (4/2 D) or One-way road • FVW = 8 WC – 28 • Four-lane undivided (4/2 UD) • FVW = 8 WC – 28 • Two-lane undivided (2/2 UD) • FVW = -0,0285 WC6 + 1,3687 WC5 - 27,066 WC4 + 281,74 WC3 -1628,4 WC2 + 4959,4 WC- 6230

  25. STEP B-2: Free-flow Speed Adjustment FVW for Carriageway Width [Table B-2:1] • Four-lane divided (4/2 D) or One-way road, and Four-lane undivided (4/2 UD)

  26. STEP B-2: Free-flow Speed Adjustment FVW for Carriageway Width [Table B-2:1] • Two-lane undivided (2/2 UD)

  27. STEP B-3: Free-flow Speed Adjustment Factor FFVSF for Side Friction • Road with shoulders • Table B-3:1 • Road with kerbs • Table B-3:2 • Adjustment factor FFVSF for six-lane roads • FFV6SF = 1 - 0,8 x (1 - FFV4SF)

  28. Roads with Shoulders

  29. Roads with Kerbs

  30. STEP B-4: Free-flow Speed Adjustment Factor FFVCS for City Size

  31. STEP B-5: Determination of Free-flow Speed for Actual Conditions • Free-flow speed for light vehicles (LV) • FV = (FV0 + FVW) x FFVSF x FFVCS • Free-flow speed for other vehicle types • FFV = FV0 – FV • FVHV = FVHV0 – FFV x FVHV0/FV0 • FVHV0  Table B-1:1

  32. STEP C-1: Base Capacity

  33. STEP C-2: Capacity Adjustment Factor FCW for Carriageway Width [Table C-2:1] • Four-lane divided (4/2 D) or One-way road • FCW = 6,25 WC – 2,75 • Four-lane undivided (4/2 UD) • FCW = 5,424528 WC – 1,92453 • Two-lane undivided (2/2 UD) • FCW = -12.424 WC6 + 76.838 WC5 – 195.332 WC4 + 260.873WC3 -192.689WC2 + 74.455WC– 11.715

  34. STEP C-2: Capacity Adjustment Factor FCW for Carriageway Width [Table C-2:1] • Four-lane divided (4/2 D) or One-way road

  35. STEP C-2: Capacity Adjustment Factor FCW for Carriageway Width [Table C-2:1] • Four-lane undivided (4/2 UD)

  36. STEP C-2: Capacity Adjustment Factor FCW for Carriageway Width [Table C-2:1] • Two-lane undivided (2/2 UD)

  37. STEP C-3: Capacity Adjustment Factor FCSP for Directional Split

  38. STEP C-4: Capacity Adjustment Factor FCSF for Side Friction • Road with shoulders • Table C-4:1 • Road with kerbs • Table C-4:2 • Adjustment factor FCSF for six-lane roads • FC6SF = 1 - 0,8 x (1 - FC4SF)

  39. STEP C-5: Capacity Adjustment Factor FCCS for City Size

  40. STEP C-6: Determination of Capacity for Actual Condition • C  Capacity (pcu/h) • C0 Base capacity (pcu/h) • FCW  Adjustment factor for carriageway width • FCSP  Adjustment factor for directional split • FCSF  Adjustment factor for side friction • FCCS  Adjustment factor for city size

  41. STEP D-1: Degree of Saturation • Q  Traffic flow (pcu/h) • Q  UR-2 (column 10 row 5 for undivided road) • Q  UR-2 (column 10 row 3 & 4 for each direction of travel on divided road) • C  Capacity (pcu/h) • C  UR-3 (column 16)

  42. STEP D-2: Speed and Travel Time • Determine the speed at actual traffic • Figure D-2:1 (two-lane undivided roads) • Figure D-2:2 (multi-lane and one-way roads) • Enter segment length (km) in column 24 UR-3 • Calculate average travel time (hour) for Light Vehicle

  43. STEP D-3: Evaluation of Traffic Performance • If DS > 0,75  revise calculations

  44. QUIZ

More Related