1 / 9

Center Wing Fuel Tank Flammability Control

Center Wing Fuel Tank Flammability Control . William Cavage AAR-440 Fire Safety Branch Wm. J. Hughes Technical Center Federal Aviation Administration. International Systems Fire Protection Working Group CAA House London, GBR April 16-17, 2006 . Outline. Background Test Article

laksha
Download Presentation

Center Wing Fuel Tank Flammability Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Center Wing Fuel Tank Flammability Control William CavageAAR-440 Fire Safety BranchWm. J. Hughes Technical CenterFederal Aviation Administration International Systems Fire Protection Working Group CAA House London, GBR April 16-17, 2006

  2. Outline • Background • Test Article • Testing Performed • Results • Summary AJP-6320 Fire Safety R&D

  3. Background • Recent FAA rulemaking and regulation has focused on improving the safety of the fleet through more thorough systems analysis and ignition source reduction • FAA proposes to make a rule requiring flammability control of some or all CWTs with an emphasis on inerting system technologies • The tool used to evaluate fleet flammability reduction can be used to show that an inerting system is not needed to reduce flammability • Other methods suggested in the past are increased flash point requirements, pressurized ullage, and ultra low fuel scavenge • It remains to be seen how well these methods would be at reducing fleet wide flammability AJP-6320 Fire Safety R&D

  4. Test Article • Use the 173 tank in environmental chamber as scale CWT • Could add fuel, inert ullage, and heat bottom of the tank • Instrumentation allowed for surface, fuel, and ullage temperatures as oxygen concentration and discrete THC measurements AJP-6320 Fire Safety R&D

  5. Testing Performed • Performed base line flammability testing of a “scavenge level” fuel load with a typical CWT type flight cycle • Repeated flight cycle for a sumped tank twice, then ventilated the tank and repeated, and last cleaned tank and repeated • Fuel had a below average flashpoint (~ 116 deg F) • Repeated the baseline flammability test for an average flashpoint fuel (~ 123 deg F) • Compared the average flashpoint baseline with data acquired from two different test articles simulated a CWT flight cycle with a 3 psid ullage • Used 5 Gal Oil can test article to get sea level pressure points and 173 tank to get flight cycle points AJP-6320 Fire Safety R&D

  6. Results - Preliminary • Reducing the liquid fuel volume in the tank can have a detrimental effect on flammability exposure in the short term • Unclear how this relates to an ultra low scavenge system • Could not repeat data illustrating the need for additional testing AJP-6320 Fire Safety R&D

  7. Results - Preliminary • The fuel flashpoint has a profound effect on the resulting flammability exposure of any given flight cycle for all fuel tank types • Limited amount of validation data for our FAR calculations • More data of varying F.P. needed for better under- standing AJP-6320 Fire Safety R&D

  8. Results - Preliminary • Increasing the ullage pressure by 3 psi drastically reduced the ullage flammability for a typical CWT mission flight cycle • Decreased the exposure time to 23 minutes from 90 • Tank needs to be under pressure during whole ground time to realize this decrease for more critical cases Fuel F.P. = 123 ºF AJP-6320 Fire Safety R&D

  9. Summary • We are only beginning to be able to quantify total hydrocarbon content giving the variability of several primary factors effecting fuel tank flammability • Limited amount of validation data available • Many factors effect the growth and sustainability of a flammable ullage and do not relate in intuitive ways • Additional work needed in all of these research areas to be able to further increase our understanding of ullage flammability and to increase our ability to predict fuel tank THC with a high degree of accuracy under a wide variety of conditions AJP-6320 Fire Safety R&D

More Related